scholarly journals CO2-Enabled Cyanohydrin Synthesis and Facile Homologation Reactions

Author(s):  
Martin Juhl ◽  
Allan Petersen ◽  
JIWOONG LEE

Thermodynamic and kinetic control of a chemical process is the key to access desired products and states. Changes are made when desired product is not accessible; one may manipulate the reaction with additional reagents, catalysts and/or protecting groups. Here we report the use of carbon dioxide to direct reaction pathways in order to selectively afford desired products in high reaction rates while avoiding the formation of byproducts. The utility of CO<sub>2</sub>-mediated selective cyanohydrin synthesis was further showcased by broadening Kiliani-Fischer synthesis to offer an easy access to variety of polyols, cyanohydrins, linear alkylnitriles, by simply starting from alkyl- and arylaldehydes, KCN and atmospheric pressure of CO<sub>2</sub>.

2020 ◽  
Author(s):  
Martin Juhl ◽  
Allan Petersen ◽  
JIWOONG LEE

Thermodynamic and kinetic control of a chemical process is the key to access desired products and states. Changes are made when desired product is not accessible; one may manipulate the reaction with additional reagents, catalysts and/or protecting groups. Here we report the use of carbon dioxide to direct reaction pathways in order to selectively afford desired products in high reaction rates while avoiding the formation of byproducts. The utility of CO<sub>2</sub>-mediated selective cyanohydrin synthesis was further showcased by broadening Kiliani-Fischer synthesis to offer an easy access to variety of polyols, cyanohydrins, linear alkylnitriles, by simply starting from alkyl- and arylaldehydes, KCN and atmospheric pressure of CO<sub>2</sub>.


2021 ◽  
pp. 17-23

The paper considers the possibility of obtaining nanocrystalline cellulose (NCC) by gas-discharge treatment of aqueous suspensions of microcrystalline cellulose or filter paper. For processing, a direct current discharge was used at atmospheric pressure with a wa-ter cathode at a discharge current of 35 mA and a discharge voltage of 1500 V. It was found that the plasma-chemical treatment of cellulose-containing material in water without the use of other reagents leads to the release of NCC with relatively large parti-cle sizes and a small surface charge.


Author(s):  
Dinumol Devasia ◽  
Ankita Das ◽  
Varun Mohan ◽  
Prashant K. Jain

Because plasmonic metal nanostructures combine strong light absorption with catalytically active surfaces, they have become platforms for the light-assisted catalysis of chemical reactions. The enhancement of reaction rates by plasmonic excitation has been extensively discussed. This review focuses on a less discussed aspect: the induction of new reaction pathways by light excitation. Through commentary on seminal reports, we describe the principles behind the optical modulation of chemical reactivity and selectivity on plasmonic metal nanostructures. Central to these phenomena are excited charge carriers generated by plasmonic excitation, which modify the energy landscape available to surface reactive species and unlock pathways not conventionally available in thermal catalysis. Photogenerated carriers can trigger bond dissociation or desorption in an adsorbate-selective manner, drive charge transfer and multielectron redox reactions, and generate radical intermediates. Through one or more of these mechanisms, a specific pathway becomes favored under light. By improved control over these mechanisms, light-assisted catalysis can be transformational for chemical synthesis and energy conversion. Expected final online publication date for the Annual Review of Physical Chemistry, Volume 72 is April 2021. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.


Author(s):  
Marina Cortés-Reyes ◽  
Ibrahim Azaoum ◽  
Sergio Molina-Ramírez ◽  
Concepción Herrera ◽  
M. Ángeles Larrubia ◽  
...  

Author(s):  
Yongkang Peng ◽  
Xiaoyue Chen ◽  
Yeqiang Deng ◽  
Lan Lei ◽  
Zhan Haoyu ◽  
...  

Abstract The traditional corona discharge fluid model considers only electrons, positive and negative ions, and the discharge parameters are determined using the simplified weighting method involving the partial pressure ratio. Atmospheric pressure discharge plasma in humid air involves three main neutral gas molecule types: N2, O2, and H2O(g). However, in these conditions, the discharge process involves many types of particles and chemical reactions, and the charge and substance transfer processes are complex. At present, the databases of plasma chemical reaction equations are still expanding based on scholarly research. In this study, we examined the key particles and chemical reactions that substantially influence plasma characteristics. In summarizing the chemical reaction model for the discharge process of N2–O2–H2O(g) mixed gases, 65 particle types and 673 chemical reactions were investigated. On this basis, a global model of atmospheric pressure humid air discharge plasma was developed, with a focus on the variation of charged particles densities and chemical reaction rates with time under the excitation of a 0–200 Td pulsed electric field. Particles with a density greater than 1% of the electron density were classified as key particles. For such particles, the top ranking generation or consumption reactions (i.e., where the sum of their rates was greater than 95% of the total rate of the generation or consumption reactions) were classified as key chemical reactions On the basis of the key particles and reactions identified, a simplified global model was derived. A comparison of the global model with the simplified global model in terms of the model parameters, particle densities, reaction rates (with time), and calculation efficiencies demonstrated that both models can adequately identify the key particles and chemical reactions reflecting the chemical process of atmospheric pressure discharge plasma in humid air. Thus, by analyzing the key particles and chemical reaction pathways, the charge and substance transfer mechanism of atmospheric pressure pulse discharge plasma in humid air was revealed, and the mechanism underlying water vapor molecules’ influence on atmospheric pressure air discharge was elucidated.


2008 ◽  
Vol 47 (40) ◽  
pp. 7705-7709 ◽  
Author(s):  
Andrew D. Shaller ◽  
Wei Wang ◽  
Haiyang Gan ◽  
Alexander D. Q. Li

2008 ◽  
Vol 63 (6) ◽  
pp. 747-755 ◽  
Author(s):  
Driss El Moustaine ◽  
Joan Torrent ◽  
Reinhard Lange

Copper ions (Cu2+) and heparan sulfate (HS) are suspected to act as regulatory agents in the conversion of cellular prion protein (PrPC) to its infectious isoform. However, the mechanism of this reaction is still largely unknown. Our previous report suggested multidimensional pathways for structural alterations of PrP, which may be modulated by high pressure (HP). Here we use HP to investigate the effects of Cu2+ and HS binding on PrP conformational changes and assembly. In the presence of Cu2+, amyloid fibrils are formed only under HP. In contrast, in the presence of HS, fibrils are formed at atmospheric pressure, but not under HP. Both compounds appear to compete for the same binding site, since HS-supported fibril formation is quenched by Cu2+. Inversely, Cu2+- mediated fibril formation under HP is inhibited by HS.


2001 ◽  
Vol 73 (12) ◽  
pp. 1895-1905 ◽  
Author(s):  
James F. Rusling

Electrolysis in microemulsions is a promising approach for environmentally friendly chemical synthetic methods of the future. Employing microemulsions instead of organic solvents for electrosynthesis has the advantages of lower toxicity and cost, high dissolving power for reactants and mediators of unlike solubility, enhancement of reaction rates by controlling the reduction potentials of mediators, possible reaction pathway control, and recycling of microemulsion components. This paper reviews recent progress in using microemulsions for direct and mediated electrosynthesis, including formation of carbon­carbon bonds. Rates of mediated reactions can be controlled by manipulating microemulsion composition. Examples are presented, in which reaction pathways of direct and mediated electrolyses can be controlled with microemulsions to give desired products in high yields. Such control has been demonstrated with dissolved and surface-bound mediators. For a covalently linked scaffold of poly(l-lysine) and cobalt corrin vitamin B12 hexacarboxylate attached to graphite, catalytic turnover rate for reduction of 1,2-dibromocylcohexane was optimized by optimizing microemulsion composition.


2015 ◽  
Vol 15 (23) ◽  
pp. 33843-33896 ◽  
Author(s):  
C. R. Hoyle ◽  
C. Fuchs ◽  
E. Järvinen ◽  
H. Saathoff ◽  
A. Dias ◽  
...  

Abstract. The growth of aerosol due to the aqueous phase oxidation of SO2 by O3 was measured in laboratory generated clouds created in the CLOUD chamber at CERN. Experiments were performed at 10 and −10 °C, on acidic (sulphuric acid) and on partially to fully neutralised (ammonium sulphate) seed aerosol. Clouds were generated by performing an adiabatic expansion – pressurising the chamber to 220 hPa above atmospheric pressure, and then rapidly releasing the excess pressure, resulting in a cooling, condensation of water on the aerosol and a cloud lifetime of approximately 6 min. A model was developed to compare the observed aerosol growth with that predicted by oxidation rates previously measured in bulk solutions. The model captured the measured aerosol growth very well for experiments performed at 10 and −10 °C, indicating that, in contrast to some previous studies, the oxidation rates of SO2 in a dispersed aqueous system are well represented by accepted rates, based on bulk measurements. To the best of our knowledge, these are the first laboratory based measurements of aqueous phase oxidation in a dispersed, super-cooled population of droplets. The measurements are therefore important in confirming that the extrapolation of currently accepted reaction rates to temperatures below 0 °C is correct.


Sign in / Sign up

Export Citation Format

Share Document