scholarly journals Preparation and characterization of calcium oxide from crab shells (Portunus pelagicus) and its application in biodiesel synthesis of waste cooking oil, palm and coconut oil

2016 ◽  
Vol 1 (1) ◽  
pp. 1-7
Author(s):  
Minaria Minaria ◽  
Risfidian Mohadi
2021 ◽  
pp. 20-27
Author(s):  
Ngee Sing Chong ◽  
Francis Uchenna Okejiri ◽  
Saidi Abdulramoni ◽  
Shruthi Perna ◽  
Beng Guat Ooi

Due to the high cost of feedstock and catalyst in biodiesel production, the viability of the biodiesel industry has been dependent on government subsidies or tax incentives. In order to reduce the cost of production, food wastes including eggshells and oyster shells have been used to prepare calcium oxide (CaO) catalysts for the transesterification reaction of biodiesel synthesis. The shells were calcined at 1000 °C for 4 hours to obtain CaO powders which were investigated as catalysts for the transesterification of waste cooking oil. The catalysts were characterized by Fourier Transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF) spectroscopy. Reaction parameters such as methanol-to-oil molar ratio, CaO catalyst concentration, and reaction time were evaluated and optimized for the percentage conversion of cooking oil to biodiesel esters. The oyster-based CaO showed better catalytic activity when compared to the eggshell-based CaO under the same set of reaction conditions.


Author(s):  
Lizda Johar Mawarani ◽  
Thomas Andherson Sihombing ◽  
Doty Dewi Risanti ◽  
Muhannad Illayan Massadeh ◽  
Dwi Prananto

Solid oxides are the most used catalyst for the synthesis of biodiesel, one of which is calcium oxide (CaO). This research reports the synthesis of CaO catalysts sourced from chicken eggshells through the calcination process. Chicken eggshells were cleaned and dried for 24 h at 120 oC. The eggshells were then calcined at temperatures varying from 600 oC to 900 oC for 6 h and the resulted sample were characterized by FTIR and XRD. The biodiesel synthesis was conducted at 65 ºC with a reaction time of 2 h and the concentration of catalyst was varied at 3 wt%, 6 wt%, and 9 wt%. The optimal biodiesel synthesis was obtained at a concentration of CaO catalyst formed at a calcination temperature of 900 ºC at 9 wt%. The yield of biodiesel conversion was obtained at 81.43 % and glycerol was produced as a by-product.


2017 ◽  
Vol 6 (2) ◽  
pp. 97-106 ◽  
Author(s):  
Nuni Widiarti ◽  
Wijianto Wijianto ◽  
Nanik Wijayati ◽  
Harjito Harjito ◽  
Samuel Budi Wardhana Kusuma ◽  
...  

Calcium oxide was obtained from waste fish bones that has been carried out systematically by decomposition at various temperatures that 800oC, 900oC and 1000oC for 4 hours. Calcium oxide from the decomposition process was characterized using XRD, FTIR, SEM EDX and SAA. The result of XRD Diffractogram showed that the crystallinity increased as the calcination temperature increased. The absorption bands in the FTIR spectra of calcium oxide from calcined waste fish bones shown at 355 cm-1 region indicated CaO vibration, which was reinforced by the emergence of a peak at 859 cm-1. Based on the analysis using SEM EDX, the calcined waste fish bones typically irregular particles and contained dominant calcium element. The low value of BET surface area and the total of pore volume were consistent with the adsorption measurement with SAA. The calcium oxide was applied for biodiesel synthesis from Waste cooking oil through transesterification reaction. The result of the optimization that the calcium oxide was decomposed from waste fish bones at 900oC. It exhibited best catalytic activity in the transesterification of waste cooking oil providing maximum biodiesel yield of 93% at 4% (w/v) of catalyst loading. The decomposition of biodiesel are determined by GC MS that produced methyl palmitate, methyl linoleate, methyl elaidate, methyl linoleolate, methyl stearate and methyl linolenate.


2014 ◽  
Vol 699 ◽  
pp. 552-557 ◽  
Author(s):  
Norzita Ngadi ◽  
Lai Nyuk Ma ◽  
Hajar Alias ◽  
Anwar Johari ◽  
Roshanida Abd Rahman ◽  
...  

In this study, production of biodiesel from waste cooking oil (WCO) was carried out via ultrasonic-assisted transesterification method. Calcium oxide (CaO) was used as a catalyst. The effects of methanol to oil molar ratio, reaction temperature and the catalyst amount towards the percentage conversion of oil to biodiesel were investigated. The biodiesel produced was analyzed using GC-FID method. The results obtained showed that 82 % of oil was successfully converted into biodiesel. This indicates that the used oil (WCO) has the potential to be the future source of biodiesel. Catalyst concentration of 3 w/w%, methanol to oil molar ratio of 15:1 and temperature of 65°C are the best condition for the conversion of oil to biodiesel. The result obtained was found out that, methanol to oil molar ratio and catalyst amount has given significant effect on the conversion of oil. However, temperature ranged from (35 to 75) °C apparently, showed no significant effect on percentage conversion of oil.


2013 ◽  
Vol 14 (3) ◽  
pp. 219 ◽  
Author(s):  
Dwi Kartika ◽  
Senny Widyaningsih

Transesterification of waste cooking oil into biodiesel using KOH catalyst with and without esterification process usingactivated natural zeolite (ZAH) catalyst has been carried out. Activation of the zeolite was done by refluxing with HCl 6Mfor 30 min, followed calcining and oxydized at 500oC for 2 hours, consecutively. The transesterification without esterificationprocess were done using KOH catalyst 1% (w/w) from oil and methanol weight and oil/methanol molar ratio 1:6 at 60oC. Theesterification reaction was also done using ZAH catalyst then continued by transesterification using KOH catalyst inmethanol media. In order to study the effect of ZAH catalyst concentration at constant temperature, the catalysts werevaried, i.e. 0, 1, 2, and 3% (w/w). To investigate the effect of temperature, the experiments were done at various temperaturefrom 30, 45, 60, and 70oC at constant catalyst concentration. The conversion of biodiesel was determined by 1H-NMRspectrometer and physical properties of biodiesel were determined using ASTM standard methods. The results showedthat the transesterification using KOH catalyst without esterification produced biodiesel conversion of 53.29%. The optimumcondition of biodiesel synthesis via esterification process were reached at 60oC and concentration of ZAH catalyst of2% (w/w), that could give biodiesel conversion = 100.00%. The physical properties were conformed with biodiesel ASTM2003b and Directorate General of Oil and Gas 2006 specification.


2020 ◽  
Vol 5 (1) ◽  
pp. 95-108
Author(s):  
Annisa Bhikuning ◽  
Jiro Senda Senda

Studying biodiesel as an alternative fuel is important for finding the most suitable fuel for the future. Biodiesel from waste cooking oil is one of the alternative fuels to replace fossil oil. Waste cooking oil is the used oil from cooking and is taken from hotels or restaurants. The emulsion of waste cooking oil and water is produced by adding water to the oil, as well as some additives to bind the water and the oil. In this study, the fuel properties of 100% biodiesel waste cooking oil  are compared to several blends by volume: 5% of biodiesel waste cooking oil blended with 95% diesel oil (BD5), 10% of biodiesel waste cooking oil blended with 90% of diesel oil (BD10), 5% of biodiesel waste cooking oil blended with 10% of water and 18.7% of additives (BDW18.7), and 5% of biodiesel waste cooking oil blended with 10% of water and 24.7% of additives (BDW24.7). The objectives of this study are to establish the properties and characteristics of the FTIR (Fourier-transform infrared spectroscopy) of biodiesel-water emulsions from waste cooking oil and to compare them to other fuels. The chemical properties of the fuels are analyzed by using the ASTM D Method and FTIR  to determine the FAME (fatty acid methyl ester) composition of biodiesel in diesel oil. The results showed that the addition of additives in the water-biodiesel oil increases the viscosity, density, and flash point. However, it decreased the caloric value due to the oxygen content in the fuel.


2019 ◽  
Vol 35 (1) ◽  
pp. 221-227
Author(s):  
Maulida Lubis ◽  
Mara Bangun Harahap ◽  
Iriany Iriany ◽  
Muhammad Hendra S. Ginting ◽  
Iqbal Navissyah Lazuardi ◽  
...  

Cooking oil waste that has been disposed could contamine the environment. However, if it is processed well, it can potentially become a raw material of polyurethane. The aim of this study was to determine the best polyurethane on the tensile strength, impact strength, elongation at break, water absorption, characterization of Fourier Transform Infra-Red (FTIR) and the characterization of Scanning Electron Microscopy (SEM). The variables used in this study were ambient process temperature with 440 rpm stirring speed, 1-minute stirring time, the ratio of polyoland WCO was 7:3 (% w/w), and the ratio of Toluene Diisocyanate (TDI) and WCO was 1:1; 1:2; 1:3; 1:4 (% w/w). The results obtained from the analysis of the best tensile strength against the polyurethane synthetic was in the 1:1 ratio of mixed variations between oil and TDI with a value of 0.403 MPa. The best impact strength was in the ratio of mixed variations between oil and TDI with 1:4 (% w/w) with a value of 600.975 J/m2. The best elongation at break against polyurethane foam synthetic was in the 1:3 ratio of mixture variations of oil and TDI with a value of 4.506%.


Sign in / Sign up

Export Citation Format

Share Document