scholarly journals Development of basic approaches to creating hardware and software for radiation monitoring information systems

Basic approaches to creating hardware and software for radiation monitoring information systems have been developed in the article. A modern information system for radiation monitoring and control that requires a comprehensive approach and an iterative process of its creation has been developed. The proposed approach to integrating local measuring devices with cloud services, using M2M/IoT technology for remote measurements, advanced semiconductor sensors based on CdTe and CdZnTe radiation detectors, modern microcontroller and communication microchips is highly promising. Developed hardware and software solutions demonstrate increased accuracy due to hardware and software correction of measurement results. A variant of the architectural solution for building a platform for remote access to dosimetric and radiometric measurements is being developed. The solution lies in the direction of improving the parameters of detectors, as well as the characteristics of electronic modules of detecting systems and creating software for controlling the detection process, collecting and digital processing of information, and its adequate presentation to users online. The architecture and structural diagram of a dosimetric system, a sequence diagram, a diagram of a dosimetric system with a subsystem for data exchange over the Internet have been created. A new algorithm for measuring the exposure dose rate of ionizing radiation has been proposed. The block diagram of a microcontroller dosimeter has been developed. The algorithm for correcting the dependence of the sensitivity of the detector based on CdZnTe on the energy of the detected gamma quanta has already been proposed. The algorithm significantly reduces the uncertainty of measuring the radiation dose rate. The architecture and block diagram of the dosimetric system with the possibility of remote access and remote control of the main functions has been presented as well. The calculation of the exposure dose of gamma radiation and the power of the exposure dose with the energy dependence correction have been used. The system elements have proved to be useful for students’ distant laboratory work during the quarantine.

ANRI ◽  
2020 ◽  
pp. 31-44
Author(s):  
Aleksey Ekidin ◽  
Aleksey Vasil'ev ◽  
Maksim Vasyanovich ◽  
Evgeniy Nazarov ◽  
Mariya Pyshkina ◽  
...  

The article presents the results of field studies in the area of the Belarusian NPP in the pre-operational period. The «background» contents of gamma-emitting radionuclides in individual components of the environment are determined. The main array of dose rate measurements in the area of the NPP construction site is in the range 0.048 ÷ 0.089 μSv/h. External radiation in the surveyed area is formed at 96% due to 40K, 226Ra and 232Th. The information obtained can be used to correctly interpret the data of future radiation monitoring during normal operation of nuclear power plants.


Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1819
Author(s):  
Rasa Bruzgiene ◽  
Konstantinas Jurgilas

Information systems of critical infrastructure provide services on which the core functions of a state and its economy depend as well as welfare of society. Such systems are becoming an increasingly common target for crimes and attacks in cyberspace, as their vulnerabilities can be exploited for malicious activities seeking financial or political gain. One of the main reasons that threatens the security of these systems is the weak control of remote access, otherwise defined as management of a system’s user identity. Management of user identity depends on user authentication, authorization and the assignment of certain rights in the digital space. This paper provides the proposed two-factor (2FA) digital authentication method for remote access to an information system of a critical infrastructure. Results of testing the method’s usability and resilience to cyber threats have shown that the system, in which the method was implemented, is protected from dangerous HTTP requests and publicly available system’s endpoints are protected from threatening inputs that could cause malicious activities on the critical infrastructure. Additionally, the implementation of the authentication API application ensures the rapidity of the method for less than 500 ms for 100 users working in parallel with the system at the same time.


2013 ◽  
Vol 25 (4) ◽  
pp. 395-403
Author(s):  
Pančo Ristov

The quality of Vessel Traffic Management and Information Systems depends on the quality of all subsystems, in particular the quality of control centers. The most commonly used quantitative indicators of the control centers' quality are: reliability, availability, safety, and system failure. Therefore, a block diagram of reliability and the model for reliability / availability (Markov model) have been created in this paper and a detailed analysis and calculation of the quantitative indicators of critical components (servers) of the control center have been performed. The quality functioning of the control centers will enable gathering, processing, storing and dissemination of timely, safe, and reliable data and information to the services in charge of monitoring and management of maritime traffic.


2019 ◽  
Vol 186 (4) ◽  
pp. 538-538
Author(s):  
Munehiko KOWATARI ◽  
Hiroshi YOSHITOMI ◽  
Sho NISHINO ◽  
Yoshihiko TANIMURA ◽  
Tetsuya OHISHI ◽  
...  

Author(s):  
Ludwig Slusky ◽  
Parviz Partow-Navid

This chapter introduces the development of a Unix Lab at the Department of Information Systems at California State University, Los Angeles. It also describes the lab’s impact on our curriculum and the future plans for the inclusion of remote access and wireless technology.


2015 ◽  
Vol 11 (3) ◽  
pp. 1-9
Author(s):  
Ugochukwu Okoro ◽  
Ijeoma Dike ◽  
Chidiezie Chineke ◽  
Christiana Godwin ◽  
Chiamaka Chukwunyere

Sign in / Sign up

Export Citation Format

Share Document