scholarly journals Palaeogeography of a Mid Miocene Turbidite Complex, Moki Formation, Taranaki Basin, New Zealand.

2021 ◽  
Author(s):  
◽  
Sarah Grain
Keyword(s):  
New Zealand ◽  
Sediment Supply ◽  
Seismic Facies ◽  
Meandering Channel ◽  
Progressive Development ◽  
Hydrocarbon Reservoir ◽  
The North ◽  
Basin Floor ◽  
Well Data ◽  
Seismic Reflection Profiles

<p>The Moki Formation, Taranaki Basin, New Zealand, is a Mid Miocene (Late Altonian to Early Lillburnian) sand-rich turbidite complex bounded above and below by the massive bathyal mudstone of the Manganui Formation. The Moki Formation is a proven hydrocarbon reservoir with its stacked, thick, tabular sandstone packages totalling more than 300 m in places. Previous regional studies of the formation have been based primarily on well data and resulted in varying palaeogeographic interpretations. This study, restricted to the southern offshore region of the basin, better constrains the spatial and temporal development of the Moki Formation by combining well data with seismic interpretation to identify key stratal geometries within the sediment package. Nearly 30,000 km of 2D seismic reflection profiles and two 3D surveys, along with data from 18 wells and three cores were reviewed and key sections analysed in detail. Seismic facies have been identified which provide significant insights into the structure, distribution and progressive development of the Moki Formation. These include: a clearly defined eastern limit of the fan complex, thinning and fining of the distal turbidite complex onto the basin floor in the north and west, evidence of fan lobe switching, spectacular meandering channel systems incised into the formation at seismic scales, and the coeval palaeoshelf-slope break in the south east of the basin. In addition, a Latest Lillburnian / Waiauan turbidite complex has been mapped with large feeder, fan and bypassing channels traced. This study presents an improved palaeogeographic interpretation of the Moki Formation and the younger, Latest Lillburnian / Waiauan-aged, turbidite complex. This interpretation shows that during the Late Altonian, sandstone deposition was localised to small fan bodies in the vicinity of Maui-4 to Moki-1 wells. A bathymetric deepening during the Clifdenian is identified, which appears to have occurred concurrently as the establishment of the Moki Formation fan system, centred around the southern and central wells. With continued sediment supply to the basin floor, the fan system prograded markedly northward and spilled onto the Western Stable Platform during the early Lillburnian. Sand influx to the bathyal basin floor abruptly ceased and large volumes of mud were deposited. By the Waiauan stage, sands were again deposited at bathyal depths on fan bodies and carried to greater depths through a complex bypassing channel system.</p>

scholarly journals Palaeogeography of a Mid Miocene Turbidite Complex, Moki Formation, Taranaki Basin, New Zealand.

2021 ◽  
Author(s):  
◽  
Sarah Grain
Keyword(s):  
New Zealand ◽  
Sediment Supply ◽  
Seismic Facies ◽  
Meandering Channel ◽  
Progressive Development ◽  
Hydrocarbon Reservoir ◽  
The North ◽  
Basin Floor ◽  
Well Data ◽  
Seismic Reflection Profiles

<p>The Moki Formation, Taranaki Basin, New Zealand, is a Mid Miocene (Late Altonian to Early Lillburnian) sand-rich turbidite complex bounded above and below by the massive bathyal mudstone of the Manganui Formation. The Moki Formation is a proven hydrocarbon reservoir with its stacked, thick, tabular sandstone packages totalling more than 300 m in places. Previous regional studies of the formation have been based primarily on well data and resulted in varying palaeogeographic interpretations. This study, restricted to the southern offshore region of the basin, better constrains the spatial and temporal development of the Moki Formation by combining well data with seismic interpretation to identify key stratal geometries within the sediment package. Nearly 30,000 km of 2D seismic reflection profiles and two 3D surveys, along with data from 18 wells and three cores were reviewed and key sections analysed in detail. Seismic facies have been identified which provide significant insights into the structure, distribution and progressive development of the Moki Formation. These include: a clearly defined eastern limit of the fan complex, thinning and fining of the distal turbidite complex onto the basin floor in the north and west, evidence of fan lobe switching, spectacular meandering channel systems incised into the formation at seismic scales, and the coeval palaeoshelf-slope break in the south east of the basin. In addition, a Latest Lillburnian / Waiauan turbidite complex has been mapped with large feeder, fan and bypassing channels traced. This study presents an improved palaeogeographic interpretation of the Moki Formation and the younger, Latest Lillburnian / Waiauan-aged, turbidite complex. This interpretation shows that during the Late Altonian, sandstone deposition was localised to small fan bodies in the vicinity of Maui-4 to Moki-1 wells. A bathymetric deepening during the Clifdenian is identified, which appears to have occurred concurrently as the establishment of the Moki Formation fan system, centred around the southern and central wells. With continued sediment supply to the basin floor, the fan system prograded markedly northward and spilled onto the Western Stable Platform during the early Lillburnian. Sand influx to the bathyal basin floor abruptly ceased and large volumes of mud were deposited. By the Waiauan stage, sands were again deposited at bathyal depths on fan bodies and carried to greater depths through a complex bypassing channel system.</p>

Influence of mass transport deposit (MTD) surface topography on deep-water deposition: an example from a predominantly fine-grained continental margin, New Zealand

2020 ◽  
Vol 500 (1) ◽  
pp. 147-171 ◽  
Author(s):  
Suzanne Bull ◽  
Greg H. Browne ◽  
Malcolm J. Arnot ◽  
Lorna J. Strachan
Keyword(s):  
New Zealand ◽  
Mass Transport ◽  
Surface Topography ◽  
Deep Water ◽  
Three Dimensional ◽  
Sediment Supply ◽  
Fine Grained ◽  
Basin Floor ◽  
Detachment Surface ◽  
Image Part

AbstractThree-dimensional (3D) seismic data reveal the complex interplay between the surface topography of a c. 4405 km3 mass transport deposit (MTD) and overlying sedimentary packages over approximately the last two million years. The data image part of the Pleistocene to recent shelf to slope to basin-floor Giant Foresets Formation in offshore western New Zealand. The MTD created substantive topographic relief and rugosity at the contemporaneous seabed, formed by the presence of a shallow basal detachment surface, and very large (up to 200 m high) intact slide blocks, respectively. Sediments were initially deflected away from high-relief MTD topography and confined in low areas. With time, the MTD was progressively healed by a series of broadly offset-stacked and increasingly unconfined packages comprised of many channel bodies and their distributary complexes. Positive topography formed by the channels and their distributary complexes further modified the seafloor and influenced the location of subsequent sediment deposition. Channel sinuosity increased over time, interpreted as the result of topographic healing and reduced seafloor gradients. The rate of sediment supply is likely to have been non-uniform, reflecting tectonic pulses across the region. Sediments were routed into deep water via slope-confined channels that originated shortly before emplacement of the MTD.

scholarly journals A seismic stratigraphic model for understanding the sedimentary and tectonic evolution of Solander Trough, offshore Fiordland, New Zealand

2021 ◽  
Author(s):  
◽  
Jiten Patel
Keyword(s):  
New Zealand ◽  
Seismic Reflection ◽  
Age Determination ◽  
Petroleum Industry ◽  
Plate Boundary ◽  
Sediment Supply ◽  
Initial Growth ◽  
Seismic Reflection Data ◽  
The North ◽  
Stratigraphic Model

<p>Solander Trough is located offshore and south of Fiordland, New Zealand, adjacent to the geologically young Pacific-Australian plate boundary. Petroleum industry exploration was restricted to the near-shore. This thesis presents the first stratigraphic analysis of Solander Trough south of ~46.5°S, using 2D seismic reflection data acquired and processed onboard the R/V Marcus G. Langseth in 2018 (voyage MGL1803). The only pre-existing high-quality line, which was acquired onboard the R/V Maurice Ewing during voyage EW9601a in 1996, was reprocessed.  The study area is divided into northern and southern sub-basins by Tauru High. Four megasequences and eight sequences are identified in the northern sub-basin (SLN). In the southern sub-basin (SLS), three megasequences and seven sequences are mapped. Biostratigraphy from the Parara-1 exploration well enabled age determination in the northern sub-basin. High resolution (~10 m) swath bathymetry data collected along seismic reflection lines provide insight into modern sedimentary processes.  Solander Trough formed in the Eocene, but most sediment is young (<~15 Ma). Puysegur Ridge formed in the Miocene during subduction initiation and now shelters Solander Trough from the Antarctic Circumpolar Current, which affects depositional architecture. The oldest megasequences, SLN1 and SLS1, relate to normal-faulted basement with irregular relief. An increase in sediment supply from the north created megasquence SLN2, but it is thin and not recognised in the southern sub-basin. Megasequence SLN3 signals reverse reactivation on the Parara Anticline and Tauru High; its equivalent (SLS2) marks the first sediments rapidly deposited in southern Solander Trough, and is also linked in the south to initial growth of Puysegur Ridge. SLN4 is a product of Pliocene-Quaternary reverse reactivation of Solander Anticline, and its correlative, SLS3 in the southern sub-basin, is related to folding and widening of the eastern margin of Puysegur Ridge.</p>

scholarly journals A seismic stratigraphic model for understanding the sedimentary and tectonic evolution of Solander Trough, offshore Fiordland, New Zealand

2021 ◽  
Author(s):  
◽  
Jiten Patel
Keyword(s):  
New Zealand ◽  
Seismic Reflection ◽  
Age Determination ◽  
Petroleum Industry ◽  
Plate Boundary ◽  
Sediment Supply ◽  
Initial Growth ◽  
Seismic Reflection Data ◽  
The North ◽  
Stratigraphic Model

<p>Solander Trough is located offshore and south of Fiordland, New Zealand, adjacent to the geologically young Pacific-Australian plate boundary. Petroleum industry exploration was restricted to the near-shore. This thesis presents the first stratigraphic analysis of Solander Trough south of ~46.5°S, using 2D seismic reflection data acquired and processed onboard the R/V Marcus G. Langseth in 2018 (voyage MGL1803). The only pre-existing high-quality line, which was acquired onboard the R/V Maurice Ewing during voyage EW9601a in 1996, was reprocessed.  The study area is divided into northern and southern sub-basins by Tauru High. Four megasequences and eight sequences are identified in the northern sub-basin (SLN). In the southern sub-basin (SLS), three megasequences and seven sequences are mapped. Biostratigraphy from the Parara-1 exploration well enabled age determination in the northern sub-basin. High resolution (~10 m) swath bathymetry data collected along seismic reflection lines provide insight into modern sedimentary processes.  Solander Trough formed in the Eocene, but most sediment is young (<~15 Ma). Puysegur Ridge formed in the Miocene during subduction initiation and now shelters Solander Trough from the Antarctic Circumpolar Current, which affects depositional architecture. The oldest megasequences, SLN1 and SLS1, relate to normal-faulted basement with irregular relief. An increase in sediment supply from the north created megasquence SLN2, but it is thin and not recognised in the southern sub-basin. Megasequence SLN3 signals reverse reactivation on the Parara Anticline and Tauru High; its equivalent (SLS2) marks the first sediments rapidly deposited in southern Solander Trough, and is also linked in the south to initial growth of Puysegur Ridge. SLN4 is a product of Pliocene-Quaternary reverse reactivation of Solander Anticline, and its correlative, SLS3 in the southern sub-basin, is related to folding and widening of the eastern margin of Puysegur Ridge.</p>

Studies of Ptiliidae (Coleoptera) in the Spirit Collection of the Natural History Museum, London 2: New species and records from P. Hammond's visit to New Zealand in 1983–84

2018 ◽  
Vol 154 (3) ◽  
pp. 179-196
Author(s):  
Michael Darby
Keyword(s):  
New Species ◽  
New Zealand ◽  
Natural History ◽  
Natural History Museum ◽  
History Museum ◽  
The North ◽  
Three New Species ◽  
North And South

Some 2,000 Ptiliidae collected in the North and South Islands of New Zealand in 1983/1984 by Peter Hammond of the Natural History Museum, London, are determined to 34 species, four of which are new to the country. As there are very few previous records, most from the Auckland district of North Island, the Hammond collection provides much new distributional data. The three new species: Nellosana insperatus sp. n., Notoptenidium flavum sp. n., and Notoptenidium johnsoni sp. n., are described and figured; the genus Ptiliodes is moved from Acrotrichinae to Ptiliinae, and Ptenidium formicetorum Kraatz recorded as a new introduction. Information is provided to aid separation of the new species from those previously recorded.

scholarly journals Spatial Distribution of Lichens in Metrosideros excelsa in Northern New Zealand Urban Forests

Diversity ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 170
Author(s):  
Gladys N. Benitez ◽  
Glenn D. Aguilar ◽  
Dan Blanchon
Keyword(s):  
Spatial Distribution ◽  
Species Richness ◽  
New Zealand ◽  
Lichen Species ◽  
Positive Correlation ◽  
Breast Height ◽  
Lichen Community ◽  
The North ◽  
The City ◽  
Lichen Flora

The spatial distribution of corticolous lichens on the iconic New Zealand pōhutukawa (Metrosideros excelsa) tree was investigated from a survey of urban parks and forests across the city of Auckland in the North Island of New Zealand. Lichens were identified from ten randomly selected trees at 20 sampling sites, with 10 sites classified as coastal and another 10 as inland sites. Lichen data were correlated with distance from sea, distance from major roads, distance from native forests, mean tree DBH (diameter at breast height) and the seven-year average of measured NO2 over the area. A total of 33 lichen species were found with coastal sites harboring significantly higher average lichen species per tree as well as higher site species richness. We found mild hotspots in two sites for average lichen species per tree and another two separate sites for species richness, with all hotspots at the coast. A positive correlation between lichen species richness and DBH was found. Sites in coastal locations were more similar to each other in terms of lichen community composition than they were to adjacent inland sites and some species were only found at coastal sites. The average number of lichen species per tree was negatively correlated with distance from the coast, suggesting that the characteristic lichen flora found on pōhutukawa may be reliant on coastal microclimates. There were no correlations with distance from major roads, and a slight positive correlation between NO2 levels and average lichen species per tree.

scholarly journals A new method for correcting temperature log profiles in low-enthalpy plays

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Sandra Schumacher ◽  
Inga Moeck
Keyword(s):  
Input Parameter ◽  
New Method ◽  
Geothermal Resources ◽  
The North ◽  
Deep Wells ◽  
Thermal Disturbance ◽  
Drilling Operations ◽  
Crucial Information ◽  
Well Data ◽  
Drilling Time

Abstract Temperature logs recorded shortly after drilling operations can be the only temperature information from deep wells. However, these measurements are still influenced by the thermal disturbance caused by drilling and therefore do not represent true rock temperatures. The magnitude of the thermal disturbance is dependent on many factors such as drilling time, logging procedure or mud temperature. However, often old well reports lack this crucial information so that conventional corrections on temperature logs cannot be performed. This impedes the re-evaluation of well data for new exploration purposes, e.g. for geothermal resources. This study presents a new method to correct log temperatures in low-enthalpy play types which only requires a knowledge of the final depth of the well as an input parameter. The method was developed and verified using existing well data from an intracratonic sedimentary basin, the eastern part of the North German Basin. It can be transferred to other basins with little or no adjustment.

Sign in / Sign up

Export Citation Format

Share Document