CONSTRUCTIVE SOLUTION FOR INCREASING DRIP IRRIGATION EFFICIENCY

2021 ◽  
pp. 31-36
Author(s):  
Y. Y. АRISKINA ◽  
◽  
Y. E. DOMASHENKO

The purpose is to study the technological parameters of the developed drip outlet to improve the drip irrigation systems effi ciency. The studies to determine the main design specifi cations of the improved drip outlet were carried out in laboratory conditions.

EDIS ◽  
2019 ◽  
Vol 2019 (5) ◽  
pp. 3
Author(s):  
Ramdas Kanissery ◽  
Biwek Gairhe ◽  
Brent Sellers ◽  
Steve Futch

In Florida, clustered pellitory is becoming a troublesome weed for citrus, especially from the winter through early summer. Inadequate management of this weed can result in its heavy infestation in tree rows and can interrupt the spray pattern of low-volume drip irrigation systems. This new 3-page publication of the UF/IFAS Horticultural Sciences Department will assist Florida citrus growers with proper identification of clustered pellitory and with adoption of adequate and timely strategies to manage this weed in their groves. Written by Ramdas Kanissery, Biwek Gairhe, Brent Sellers, and Steve Futch. https://edis.ifas.ufl.edu/hs1341


2018 ◽  
Vol 37 (2) ◽  
pp. 105-122 ◽  
Author(s):  
Ji Feng ◽  
Yunkai Li ◽  
Zeyuan Liu ◽  
Tahir Muhammad ◽  
Ruonan Wu

2015 ◽  
Vol 19 (7) ◽  
pp. 3073-3091 ◽  
Author(s):  
J. Jägermeyr ◽  
D. Gerten ◽  
J. Heinke ◽  
S. Schaphoff ◽  
M. Kummu ◽  
...  

Abstract. Global agricultural production is heavily sustained by irrigation, but irrigation system efficiencies are often surprisingly low. However, our knowledge of irrigation efficiencies is mostly confined to rough indicative estimates for countries or regions that do not account for spatiotemporal heterogeneity due to climate and other biophysical dependencies. To allow for refined estimates of global agricultural water use, and of water saving and water productivity potentials constrained by biophysical processes and also non-trivial downstream effects, we incorporated a process-based representation of the three major irrigation systems (surface, sprinkler, and drip) into a bio- and agrosphere model, LPJmL. Based on this enhanced model we provide a gridded world map of irrigation efficiencies that are calculated in direct linkage to differences in system types, crop types, climatic and hydrologic conditions, and overall crop management. We find pronounced regional patterns in beneficial irrigation efficiency (a refined irrigation efficiency indicator accounting for crop-productive water consumption only), due to differences in these features, with the lowest values (< 30 %) in south Asia and sub-Saharan Africa and the highest values (> 60 %) in Europe and North America. We arrive at an estimate of global irrigation water withdrawal of 2469 km3 (2004–2009 average); irrigation water consumption is calculated to be 1257 km3, of which 608 km3 are non-beneficially consumed, i.e., lost through evaporation, interception, and conveyance. Replacing surface systems by sprinkler or drip systems could, on average across the world's river basins, reduce the non-beneficial consumption at river basin level by 54 and 76 %, respectively, while maintaining the current level of crop yields. Accordingly, crop water productivity would increase by 9 and 15 %, respectively, and by much more in specific regions such as in the Indus basin. This study significantly advances the global quantification of irrigation systems while providing a framework for assessing potential future transitions in these systems. In this paper, presented opportunities associated with irrigation improvements are significant and suggest that they should be considered an important means on the way to sustainable food security.


Author(s):  
A. S. Shtanko ◽  
◽  
V. N. Shkura ◽  

Purpose: development of layout and design schemes for low-flow water intakes, arranged on shallow river and stream watercourses for supplying water to drip irrigation systems. Agricultural development of terraces and floodplains of small foothill and mountain streams actualizes the development of facilities for water intake from them for the purpose of irrigating land. Morphological and hydrographic features, including shallow low-water depths, high flow rates, flow rates variability, saturation with sediments, the presence of underflow and overflow runoff, etc., make water intake from such watercourses difficult and specific. These circumstances predetermine the relevance of water intake structures development corresponding to the specified conditions. Materials and Methods. When developing the layout and design schemes of low-flow water intakes from shallow watercourses, the technologies of exploratory design of engineering systems and structures were used. Results. With regard to the morphometric, hydrological and other conditions of shallow foothill and mountain streams, a water intake with a bottom water intake was adopted for development. The water intake part of headworks is designed in the form of a toe drain, which has under-flow and overflow intake parts that allow water intake from the channel and off-channel water streams. The toe is made of two or three layers of sand and gravel material. Drainage pipes or pipe filters are used as a drainage element. Depending on the conditions of the watercourse, water intakes with transverse, longitudinal and pocket-coastal placement of water intakes are proposed. Conclusion. The layout and design schemes of filtering water intakes from shallow watercourses based on the use of overflow, underflow and combined structures of multilayer drainage water intakes with stream (transverse and longitudinal) and off-channel (pocket-coastal) placement have been proposed and developed.


2012 ◽  
Vol 21 (6) ◽  
pp. 417-426
Author(s):  
Salima Salhi ◽  
Amar Imache ◽  
Jean-Philippe Tonneau ◽  
Mohamed-Yassine Ferfera

Sign in / Sign up

Export Citation Format

Share Document