scholarly journals Water Purification Technology Implementation Design

2020 ◽  
Vol 3 (2) ◽  
Author(s):  
Anggara Trisna Nugraha ◽  
Rahman Arifuddin
Keyword(s):  
Water Purification ◽  
Technology Implementation

BIM Technologies In Building Construction Projects Management In Russia

2019 ◽  
pp. 48-59
Keyword(s):  
Project Management ◽  
Economic Efficiency ◽  
Technology Implementation ◽  
Management System ◽  
Construction Projects ◽  
Technology Development ◽  
Integrated Management ◽  
Building Construction ◽  
Information Modeling ◽  
Project Management System

The international experience of integrating building information modeling (BIM) into project management system with innovation implementation accent has been revealed in this article. The events carried out on federal and regional levels concerning the President of Russia directive on building construction industry modernization and construction objects transferring to life cycle management by means of BIM were analyzed. The large company experience of implementing BIM was summarized with describing some examples in different cities and regions of our country and thus the main directions of this technology development were determined. The key points of BIM and project management system pairing and impacting an innovation choice witch determine the project economic efficiency in the integrated management system were shown. The main reports of "Building construction projects technology and management: new practices and prospects" conference by Moscow Trade and Commerce Chamber were reviewed in this direction and problems of the new investment and construction project management technology implementation were shown. The ways to solve these problems were disclosed by work examples of PAO "Sberbank", and successfully working in our country firms Bilfinger Tebodin - BIM design and Beiten Burkhard -jurisdiction support. Some economic efficiency questions of BIM implementation were disclosed in the report delivered by The Plekhanov University of Economics (project and program management base department of Capital Group). Management system suggestions, regarding BIM implementation in Moscow construction were given.

CONSERVATION OF RARE SPECIES PLANTS AND LICHENS IN SITU WITH PLANNED ANTHROPOGENIC ACTIVITIES: BASIC APPROACHES AND IMPLEMENTATION PRINCIPLES

2018 ◽  
Vol 12 (7-8) ◽  
pp. 38-45
Author(s):  
A. N. EFREMOV ◽  
N. V. PLIKINA ◽  
T. ABELI
Keyword(s):  
Rare Species ◽  
Technology Implementation ◽  
Technology Development ◽  
Anthropogenic Activities ◽  
Natural Habitat ◽  
Local Population ◽  
Main Stage ◽  
Social Risks

Rare species are most vulnerable to man-made impacts, due to their biological characteristics or natural resource management. As a rule, the economic impact is associated with the destruction and damage of individual organisms, the destruction or alienation of habitats. Unfortunately, the conservation of habitat integrity is an important protection strategy, which is not always achievable in the implementation of industrial and infrastructural projects. The aim of the publication is to summarize the experience in the field of protection of rare species in the natural habitat (in situ), to evaluate and analyze the possibility of using existing methods in design and survey activities. In this regard, the main methodological approaches to the protection of rare species in the natural habitat (in situ) during the proposed economic activity were reflected. The algorithm suggested by the authors for implementing the in situ project should include a preparatory stage (initial data collection, preliminary risk assessments, technology development, obtaining permitting documentation), the main stage, the content of which is determined by the selected technology and a long monitoring stage, which makes it possible to assess the effectiveness of the taken measures. Among the main risks of in situ technology implementation, the following can be noted: the limited resources of the population that do not allow for the implementation of the procedure without prior reproduction of individuals in situ (in vitro); limited knowledge of the biology of the species; the possibility of invasion; the possibility of crossing for closely related species that сo-exist in the same habitat; social risks and consequences, target species or population may be important for the local population; financial risks during the recovery of the population. The available experience makes it possible to consider the approach to the conservation of rare species in situ as the best available technology that contributes to reducing negative environmental risks.

Fouling Is the Beginning: Upcycling Biopolymer-Fouled Substrates for Fabricating High-Permeance Thin-Film Composite Polyamide Membranes

2020 ◽  
Author(s):  
Ruobin Dai ◽  
Hongyi Han ◽  
Tianlin Wang ◽  
Jiayi Li ◽  
Chuyang Y. Tang ◽  
...  
Keyword(s):  
Thin Film ◽  
High Pressure ◽  
End Of Life ◽  
Water Purification ◽  
Low Pressure ◽  
Polymeric Membranes ◽  
Membrane Recycling ◽  
Film Composite ◽  
Thin Film Composite ◽  
First Time

Commercial polymeric membranes are generally recognized to have low sustainability as membranes need to be replaced and abandoned after reaching the end of their life. At present, only techniques for downcycling end-of-life high-pressure membranes are available. For the first time, this study paves the way for upcycling fouled/end-of-life low-pressure membranes to fabricate new high-pressure membranes for water purification, forming a closed eco-loop of membrane recycling with significantly improved sustainability.

DISINFEKSI UNTUK PROSES PENGOLAHAN AIR MINUM

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Nusa Idaman Said
Keyword(s):  
Drinking Water ◽  
Water Purification ◽  
Distribution System ◽  
Residual Effect ◽  
Drinking Water Treatment ◽  
Disinfection Byproducts ◽  
Water Disinfection ◽  
Pathogenic Microorganisms ◽  
Microbiological Contamination ◽  
Disinfection Process

Water disinfection means the removal, deactivation or killing of pathogenic microorganisms. Microorganisms are destroyed or deactivated, resulting in termination of growth and reproduction. When microorganisms are not removed from drinking water, drinking water usage will cause people to fall ill. Chemical inactivation of microbiological contamination in natural or untreated water is usually one of the final steps to reduce pathogenic microorganisms in drinking water. Combinations of water purification steps (oxidation, coagulation, settling, disinfection, and filtration) cause (drinking) water to be safe after production. As an extra measure many countries apply a second disinfection step at the end of the water purification process, in order to protect the water from microbiological contamination in the water distribution system. Usually one uses a different kind of disinfectant from the one earlier in the process, during this disinfection process. The secondary disinfection makes sure that bacteria will not multiply in the water during distribution. This paper describes several technique of disinfection process for drinking water treatment. Disinfection can be attained by means of physical or chemical disinfectants. The agents also remove organic contaminants from water, which serve as nutrients or shelters for microorganisms. Disinfectants should not only kill microorganisms. Disinfectants must also have a residual effect, which means that they remain active in the water after disinfection. For chemical disinfection of water the following disinfectants can be used such as Chlorine (Cl2),  Hypo chlorite (OCl-), Chloramines, Chlorine dioxide (ClO2), Ozone (O3), Hydrogen peroxide etch. For physical disinfection of water the following disinfectants can be used is Ultraviolet light (UV). Every technique has its specific advantages and and disadvantages its own application area sucs as environmentally friendly, disinfection byproducts, effectivity, investment, operational costs etc. Kata Kunci : Disinfeksi, bakteria, virus, air minum, khlor, hip khlorit, khloramine, khlor dioksida, ozon, UV.

ELECTROKINETIC PROPERTIES AND SANITARY-HYGIENIC SAFETY OF WATER BIODISPERSIONS DURING ELECTROPROCESSING

2017 ◽  
pp. 123-126
Author(s):  
S. V. Vorobjeva ◽  
O. V. Smirnov ◽  
V. O. Smirnova ◽  
T. V. Semenova
Keyword(s):  
Water Purification ◽  
Electrokinetic Properties

A correlation between the electrokinetic properties of biodispersion and the possibility of increasing the efficiency of water purification in electroprocessing is shown.

Sign in / Sign up

Export Citation Format

Share Document