scholarly journals COMPARING THE FLEXURAL STRENGTH OF CONCRETE MADE WITH RIVER SAND WITH THAT MADE WITH QUARRY DUST AS FINE AGGREGATE

2018 ◽  
Vol 6 (6) ◽  
pp. 453-460
Author(s):  
Chijioke C ◽  
Nwaiwu ◽  
Aginam ◽  
Anyadiegwu
Keyword(s):  
Flexural Strength ◽  
Concrete Beams ◽  
Target Strength ◽  
Fine Aggregate ◽  
River Sand ◽  
Minimum Value ◽  
Maximum Value ◽  
Quarry Dust ◽  
Good Substitute

This work focuses on the 100% replacement of river sand with quarry dust in the production of concrete. Two types of concrete were produced (concrete made with river sand and that made with quarry dust as fine aggregate), the concretes produces were cast into beams and cured for 28 days. The flexural strengths of the concrete beams cast was determine at 28 day strength. At 28 days target strength the maximum flexural strength of concrete made with river sand as fine aggregate is 5.375111N/mm2 and minimum flexural strength is 2.2155N/mm2, for the concrete made with quarry dust as fine aggregate the maximum flexural strength is 2.567 N/mm2. The maximum value of 2.567 N/mm2 for concrete made with quarry dust as fine aggregate is higher than the minimum value of 2.2155N/mm2 for concrete made with river sand as fine aggregate. With this result it shows that quarry dust is a good substitute to river sand in the production of concrete.

Durability Studies of Environmental Friendly Self Compacting Concrete with and without Fiber

2019 ◽  
Vol 803 ◽  
pp. 207-215
Author(s):  
L.V. Prasad Meesaraganda ◽  
Nilanjan Tarafder
Keyword(s):  
Construction Industry ◽  
Construction Cost ◽  
Target Strength ◽  
Fine Aggregate ◽  
Acid Attack ◽  
Self Compacting Concrete ◽  
Chloride Permeability ◽  
River Sand ◽  
Concrete Production ◽  
Quarry Dust

Concrete is the most important building material in construction industry because of its revolutionary property of quick hardening and free from internal problems. Its use has a great effect on environment due to the large amount of natural resources and cement lime materials required for manufacture the concrete structures. Now it’s the time for think in the direction of Eco-friendly durable materials in concrete production. In the present work, Quarry Dust and Foundry Sand are partial replaced River Sand to develop Rheological and Durability properties of M40 grade of Eco-Efficient Self-Compacting Concrete (ESCC). The target strength could be achieved satisfying the rheological properties of Eco-Efficient Self-Compacting Concrete with fiber additions. In this study investigations carried to find the Permeability, Shrinkage, Acid attack and Rapid Chloride Permeability Test (RCPT) of Eco-Efficient Fiber based Self-Compacting Concrete and it is observed that it is no way inferior to the conventional concretes. From the experimentation, it is recommended that waste materials from different source are fitting to be used as fine materials in concrete. The construction cost reduces by utilising such waste as fine aggregate in place of aggregate from natural source for construction.

Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria

2020 ◽  
Vol 18 (5) ◽  
pp. 1053-1061
Author(s):  
Uchechi G. Eziefula ◽  
Hyginus E. Opara ◽  
Bennett I. Eziefula
Keyword(s):  
Compressive Strength ◽  
Target Strength ◽  
Fine Aggregate ◽  
River Sand ◽  
Content Type ◽  
Coarse Aggregates ◽  
Crushed Granite ◽  
Stone Concrete ◽  
Different Sources ◽  
Practical Implications

Purpose This paper aims to investigate the 28-day compressive strength of concrete produced with aggregates from different sources. Design/methodology/approach Coarse aggregates were crushed granite and natural local stones mined from Umunneochi, Lokpa and Uturu, Isuakwato, respectively, in Abia State, Nigeria. Fine aggregate (river sand) and another coarse aggregate (river stone) were dredged from Otammiri River in Owerri, Imo State, Nigeria. The nominal mix ratios were 1:1:2, 1:2:4 and 1:3:6, whereas the respective water–cement ratios were 0.45, 0.5, 0.55 and 0.6. Findings The compressive strength of granite concrete, river stone concrete and local stone concrete ranged 17.79-38.13, 15.37-34.57 and 14.17-31.96 N/mm2, respectively. Compressive strength was found to increase with decreasing water–cement ratio and increasing cement content. Practical implications Granite concrete should be used in reinforced-concrete construction, especially when a cube compressive strength of 30 N/mm2 or higher is required. Originality/value Granite concrete exceeded the target compressive strength for all the concrete specimens, whereas river stone concrete and local stone concrete failed to achieve the target strength for some mix proportions and water–cement ratios.

scholarly journals Flexural Behaviour of RCC Beams Partially Replacing Cement by Dolomite Powder and Sand by Quarry Dust

2019 ◽  
Vol 8 (12) ◽  
pp. 5280-5290
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Concrete Beams ◽  
Low Cost ◽  
Waste Material ◽  
Reinforced Concrete Beams ◽  
Split Tensile Strength ◽  
Quarry Dust

The present Investigation is aimed at utilizing low cost material Dolomite powder and waste material Quarry dust as partial replacement of cement and sand in concrete. This experimental investigation is carried out in three stages. In 1st stage M25 grade of concrete is produced by replacing cement by 0%, 6%, 12% and 18% of Dolomite Powder. In 2nd Stage concrete is produced by keeping the optimum 12% of dolomite powder as constant and sand is replaced by quarry dust in the percentage of 0%, 25%, 35% and 45%. In 3rd stage the optimum percentage of Dolomite Powder and Quarry Dust (DP+QD) Concrete are used to determine the compressive strength, split tensile strength and flexural strength of concrete and to check the flexural behavior of RCC beams. It is found that the concrete made of low cost material dolomite powder and waste material quarry dust increases the compressive strength, split tensile strength and flexural strength of concrete when compared to that of normal concrete. It also concluded that the first crack load and ultimate load of dolomite powder and quarry dust reinforced concrete beams increases when compared with normal reinforced concrete beams. From study it is concluded that the low cost material Dolomite powder & Quarry dust can be used in construction works which results in construction cost. By using natural resources the environment is protected.

Physical and Mechanical Properties of Concrete Incorporating Manufactured Sand

2015 ◽  
Vol 1115 ◽  
pp. 160-165
Author(s):  
Maisarah Ali ◽  
Muhammad Hariz Nordin ◽  
Siti Asmahani Saad
Keyword(s):  
Construction Industry ◽  
Physical And Mechanical Properties ◽  
Sem Analysis ◽  
Target Strength ◽  
Sieve Analysis ◽  
Fine Aggregate ◽  
Compressive Test ◽  
River Sand ◽  
Manufactured Sand ◽  
Concrete Mix

Concrete is a common material that widely used in construction industry. Excessive usage of this material causes exhaustibility to its components, especially fine aggregate or sand. In this regard, the use of manufactured sand is considered as a part of the solutions to fix this problem as it is readily available. In this research, the manufactured sand is used at 40%, 50% and 60% to replace natural river sand. SEM analysis reveals the rough surface texture of manufactured sand. The manufactured sand has angular shape and sieve analysis reveled that it has a considerable amount of fine particle. Slump test shows that concrete using manufactured sand pass the standard. On the other hand, compressive test shows that concrete cubes using manufactured sand do not achieved the target strength. Water absorptive test on the cubes revealed that M-Sand I has higher absorptivity property compared to river sand . SEM analysis revealed the existance of microcrack as well as porosity in in concrete cubes incorporating of manufactured sand. It can be concluded that it can be concluded that the higher the percentage of manufactured sand in the concrete mix the lower is the comprensive strength.

scholarly journals Utilisation of Seasand as Partial Replacement of Fine Aggregrate to Strengthen the Concrete

2020 ◽  
Vol 9 (5) ◽  
pp. 891-894
Keyword(s):  
Construction Industry ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Strength Properties ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
River Sand ◽  
Sea Sand ◽  
Quarry Dust

Concrete is an important construction material widely used in the construction industry nowadays. It is blended material consisting of cement, fine aggregate, coarse aggregate and water. Generally the use of river sand as fine aggregate in our country is very widespread in industry. This paper mainly focuses on the study of strength properties of concrete in which river sand is replaced with sea sand as fine aggregate. In addition to it, Quarry Dust when added gains strength. Different mix proportions was replaced partially in 5%, 10%, 15% by Sea sand and Quarry dust. The strength of concrete for various mix proportions are carried out and tested for 14, 28, 56 days of curing. From the results obtained, with the replacement of river sand by sea sand along with well graded quarry dust upto to 15% increases the strength of concrete.

scholarly journals Effects of Partial Replacement of Fine Aggregate with Quarry Dust on Concrete Properties

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
S.O Ajamu ◽  
I.A Raheem ◽  
S.B Attah ◽  
J.O Onicha
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Replacement Level ◽  
River Sand ◽  
Split Tensile Strength ◽  
Stone Dust ◽  
Concrete Production ◽  
Quarry Dust

Natural river sand is one of the important constituent materials in concrete production while stone dust is a material obtained from crusher plants which is also sometimes being used either partially or fully in replacement of natural river sand in concrete production. Use of stone dust in concrete not only improves the quality of concrete but also conserve the natural river sand. However, due its scarcity and environmental degradation caused resulting from excessive mining of Natural river sand, there is need to investigate an alternative material of the same quality which can replace river sand in concrete production. In the present study, experiments were carried out to study the gradation of aggregates, workability, compressive strength and split tensile strength of concrete made using quarry dust as replacement of fine aggregate at 0, 25, 50, 75, and 100%. Grade M15 of concrete was produced with ordinary Portland cement (OPC) for referral concrete while M25 of concrete was prepared for compressive strength and split tensile strength concrete. Workability and Compressive strength were determined at different replacement level of fine aggregate and optimum replacement level was determined based on compressive strength. Results showed that by replacing 50% of fine aggregate with quarry dust, concrete of maximum compressive strength can be produced as compared to all other replacement levels. The effect of quarry dust on compressive strength and split tensile strength was investigated and from the overall result obtained, it was observed that the compressive strength and split tensile strength increased significantly for all the curing ages from 0% to 50% replacement level of quarry dust. Maximum value obtained for 28day compressive and tensile strength were 25N/mm2 and 2.3N/mm2 respectively and this occurred at 50% replacement.

scholarly journals Sustainable Materials -Quarry Waste and Waste Plastic as Fine Aggregate for Improving Elastic Properties of Concrete

2020 ◽  
Vol 9 (5) ◽  
pp. 1442-1451
Keyword(s):  
Modulus Of Elasticity ◽  
Full Potential ◽  
Fine Aggregate ◽  
River Sand ◽  
Natural Sand ◽  
Conventional Concrete ◽  
Waste Plastic ◽  
Quarry Fines ◽  
Ldpe Composites ◽  
Quarry Dust

The present paper focuses on the effective utilization of byproduct of stone mines and waste plastic causing harm to the environment. It signifies sustainable utilization of quarry dust to their full potential to meet the needs of the present, while at the same time conserving natural resources and finding ways to minimise the environmental impacts associated both with quarry fines production. Mathematical modeling for interpreting modulus of elasticity of concrete mixes using ordinary river sand and compared with 0, 25%,50%,75%, 100% replacement with quarry dust in combination with waste plastic in fabriform is discussed. The addition of fine quarry dust with ldpe as waste plastic in concrete resulted in improved matrix densification compared to conventional concrete as well as . Matrix densification has been studied qualitatively through petro graphical examination using digital optical microscopy. The structure was evaluated using SEM in quarry dust and ldpe composites. It is observed that the modulus of elasticity values found to be maximum for 50% replacement of natural sand by quarry dust and waste plastic. The effects of quarry dust on the elastic modulus property were found to be consistent with conventional natural sand.

Physical Properties of Cement-Sand Brick Made by Kenaf Core: Discovering the Optimal Formulation

2021 ◽  
Vol 1041 ◽  
pp. 89-94
Author(s):  
Nurul Aini Salehuddin ◽  
Mohd Fadzil Arshad ◽  
Zakiah Ahmad ◽  
Mohd Zaim Mohd Nor ◽  
Abdul Hadi Hassan
Keyword(s):  
Compressive Strength ◽  
Physical Properties ◽  
Industrial Waste ◽  
Fine Aggregate ◽  
Replacement Level ◽  
River Sand ◽  
Kenaf Core ◽  
Cellulosic Waste ◽  
Ratio Set ◽  
Quarry Dust

In this study, the effect of replacing the river sand with industrial waste and cellulosic waste was investigated. The cellulosic waste use in this study only focuses on kenaf core, while the industrial waste use in this study is quarry dust. The fine aggregate formulation is adjusted with a different percentage of kenaf core. While the quarry dust is fixed at 50% replacement level. The water-cement ratio set for the formulation is 0.75, and the cement-sand ratio fixes at 1:8. The physical properties are measured through compressive strength and density at 28 days. The result shows that 10% is the maximum replacement of sand with kenaf core to produced brick that using 50% of quarry dust. The compressive strength value of the 10% of kenaf core at 28 days is 8.16 N/mm2 while for density is 1830 kg/m3 at 28 days. All the result shows that kenaf core has the potential to be used as a lightweight fine aggregate. But kenaf core needs to combine with other materials that contribute to the strength.

Water Penetration Resistance of Green Concrete Incorporating with Quarry Wastes

2014 ◽  
Vol 875-877 ◽  
pp. 619-623 ◽  
Author(s):  
Suppachai Sinthaworn ◽  
Wasan Teerajetgul ◽  
Attasit Sirivachiraporn
Keyword(s):  
Compressive Strength ◽  
Penetration Depth ◽  
Penetration Resistance ◽  
Fine Aggregate ◽  
Water Penetration ◽  
River Sand ◽  
Green Concrete ◽  
Mix Proportion ◽  
Water To Cement Ratio ◽  
Quarry Dust

In this study, the workability, the compressive strength and the water penetration depth under pressure for concrete incorporate with quarry waste as fine aggregate were investigated. The mix proportions of concrete were set into two classes of water to cement ratio (w/c = 0.4, 0.6). The first class (C1), the mix proportion is 1.0:0.6:2.0:4.0 (Cement: Water: Fine: Coarse). And the second class (C2), the mix proportion is 1.0:0.4:1.5:3.0 and adding the superplasticizer 1% of cement weight. The natural river sand, which use in concrete, was partially replaced by quarry dust at the rates of 0% (no quarry dust), 50% and 100 % by weight of fine aggregate. The results show that concrete containing quarry wastes as fine aggregate decreased the workability and do not significantly affect the 28-day compressive strength whereas concrete incorporating with quarry dusts reduces the water penetration depth.

Sign in / Sign up

Export Citation Format

Share Document