scholarly journals RESPONS DAN ADAPTASI IKAN TERI (Stolephorus sp.) TERHADAP LAMPU LIGHT EMITTING DIODE (LED) (Response and Adaptation of Anchovy (Stolephorus sp.) to Light Emitting Diode (LED) Lamp)

2017 ◽  
Vol 8 (1) ◽  
pp. 39
Author(s):  
Adi Susanto ◽  
Aristi Dian Purnama Fitri ◽  
Yuhelsa Putra ◽  
Heri Susanto ◽  
Tuti Alawiyah
Keyword(s):  
Light Emitting Diode ◽  
Video Camera ◽  
P Value ◽  
White Led ◽  
Light Emitting ◽  
Led Light ◽  
Main Target ◽  
Fish Tank ◽  
Fish Response ◽  
Cone Index

<div class="WordSection1"><p align="center"><strong><em>ABSTRACT</em></strong></p><p><em>Innovation of LED lamp </em><em>are </em><em>encourag</em><em>ed the </em><em>research and development to obtain effective and eco-friendly fishing lamp. However, information about response, behaviour and retina adaptation of main target species to LED light are still limited. Meanwhile, this information is a key </em><em>to</em><em> determining intensity of effective LED light for fishing operation. The aim</em><em>s</em><em> of this study </em><em>are </em><em>to determine response and retina adaptation of anchovy (Stolephorus sp.) to different LED colour. This research was performed to the anchovies with total length 4.80-6.10 cm, which were acclimated in the fish tank. Fish response was observed visually and recorded by video camera. Retina adaptation was analysed</em><em> </em><em>by using histology method through pigment and cone index at light zone respectively. The results showed the fish response to white LED 3.4 times </em><em>was </em><em>faster than blue LED. However times duration of anchovy at the lighting area was 1.8 times longer in the area of blue lighting. The anchovies were more responsive to white LED (p value= 0.0033)</em><em> </em><em>with </em><em>the </em><em>average number of fish </em><em>was </em><em>45 individuals. White LED with illumination between 42-96 lux was the optimal </em><em>illumination </em><em>for fishing operation which can reach the highest cone index about 64-73%.</em><em></em></p><p class="TubuhTulisanAll"><strong><em>Keywords:</em></strong><strong><em> </em></strong><em>cone index, effectiveness, fishing</em><em>,</em><em> illumination</em></p><p align="center"><strong>ABSTRAK</strong></p><p class="Abstrakisi">Penemuan lampu LED mendorong berkembangnya penelitian untuk menghasilkan <em>fishing lamp </em>yang lebih efektif dan ramah lingkungan. Namun informasi tentang respons, tingkah laku dan adaptasi retina mata ikan target tangkapan terhadap cahaya lampu LED masih terbatas. Pada dasarnya, informasi tersebut menjadi kunci dalam penentuan intensitas cahaya lampu LED yang efektif untuk penangkapan ikan. Penelitian ini bertujuan untuk menentukan respons dan adaptasi retina mata ikan teri (<em>Stolephorus </em>sp.) terhadap lampu LED dengan warna berbeda. Penelitian menggunakan ikan teri dengan panjang total antara 4,80-6,10 cm yang telah melalui proses aklimatisasi dalam bak penampungan. Pengamatan terhadap respons ikan teri dilakukan secara visual dan direkam dengan video kamera. Adaptasi retina mata ikan teri diamati berdasarkan hasil histologi dengan melihat nilai indeks pigmen dan indeks kon pada masing-masing zona pencahayaan. Hasil penelitian menunjukkan bahwa ikan teri 3,4 kali lebih cepat merespons lampu LED putih dibandingkan terhadap lampu LED biru. Namun ikan teri bertahan 1,8 kali lebih lama di area pencahayaan warna biru. Ikan teri lebih memberikan respons yang lebih baik pada LED putih (p value= 0,0033) dengan rata-rata jumlah ikan yang berkumpul di area pencahayaan sebanyak 45 ekor. Lampu LED warna putih dengan iluminasi cahaya antara 42-96 lux merupakan lampu paling ideal untuk penangkapan teri karena menghasilkan adaptasi sel kon paling tinggi dengan indeks kon antara 64-73%.</p><p class="TubuhTulisanAll" align="left"><strong>Kata kunci:</strong>  indeks kon, efektivitas, penangkapan, iluminasi</p></div>

Optimising the illumination spectrum for tissue texture visibility

2017 ◽  
Vol 50 (5) ◽  
pp. 757-771 ◽  
Author(s):  
H Wang ◽  
RH Cuijpers ◽  
IMLC Vogels ◽  
M Ronnier Luo ◽  
I Heynderickx ◽  
...  
Keyword(s):  
Biological Tissue ◽  
Specular Reflection ◽  
Light Emitting Diode ◽  
Psychophysical Experiment ◽  
White Led ◽  
Light Emitting ◽  
Led Light ◽  
The Impact

A light-emitting diode based spectrum optimisation is proposed to enhance the visibility of the texture of biological tissue. This optimisation method is based on maximising perceptual colour differences between pairs of colour patches using images of biological tissue. This approach has two advantages. First, by weighting the importance of colour differences, the impact of glint or specular reflection is reduced automatically. Second, this optimisation method puts the priority on small colour differences which could be more useful in enhancing the visibility of tissue texture. Furthermore, a psychophysical experiment has been conducted to evaluate the effectiveness of the proposed method. To be able to generalise our conclusions, different biological tissue types are used. The results show that illumination spectra that are optimised based on human perceptual colour differences significantly improve the visibility of tissue texture compared to illuminants such as CIE D65, and white LED light.

scholarly journals Design of a Secondary Freeform Lens of UV LED Mosquito-Trapping Lamp for Enhancing Trapping Efficiency

Crystals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 335 ◽  
Author(s):  
Wei-Hsiung Tseng ◽  
Diana Juan ◽  
Wei-Cheng Hsiao ◽  
Cheng-Han Chan ◽  
Hsin-Yi Ma ◽  
...  
Keyword(s):  
Light Intensity ◽  
Intensity Distribution ◽  
Light Emitting Diode ◽  
Trapping Efficiency ◽  
Axially Symmetric ◽  
Light Intensity Distribution ◽  
Light Emitting ◽  
Led Light ◽  
Uv Led ◽  
Freeform Lens

In this study, our proposed ultraviolet light-emitting diode (UV LED) mosquito-trapping lamp is designed to control diseases brought by insects such as mosquitoes. In order to enable the device to efficiently catch mosquitoes in a wider area, a secondary freeform lens (SFL) is designed for UV LED. The lens is mounted on a 3 W UV LED light bar as a mosquito-trapping lamp of the new UV LED light bar module to achieve axially symmetric light intensity distribution. The special SFL is used to enhance the trapping capabilities of the mosquito-trapping lamp. The results show that when the secondary freeform surface lens is applied to the experimental outdoor UV LED mosquito-trapping lamp, the trapping range can be expanded to 100π·m2 and the captured mosquitoes increased by about 300%.

scholarly journals Antarctic krill (Euphausia superba) exhibit positive phototaxis to white LED light

Polar Biology ◽  
2021 ◽  
Vol 44 (3) ◽  
pp. 483-489
Author(s):  
Bjørn A. Krafft ◽  
Ludvig A. Krag
Keyword(s):  
Antarctic Krill ◽  
Light Exposure ◽  
Euphausia Superba ◽  
Marine Species ◽  
Artificial Light ◽  
White Led ◽  
Light Emitting ◽  
Positive Phototaxis ◽  
Led Light ◽  
Exposure Experiment

AbstractThe use of light-emitting diodes (LEDs) is increasingly used in fishing gears and its application is known to trigger negative or positive phototaxis (i.e., swimming away or toward the light source, respectively) for some marine species. However, our understanding of how artificial light influences behavior is poorly understood for many species and most studies can be characterized as trial and error experiments. In this study, we tested whether exposure to white LED light could initiate a phototactic response in Antarctic krill (Euphausia superba). Trawl-caught krill were used in a controlled artificial light exposure experiment conducted onboard a vessel in the Southern Ocean. The experiment was conducted in chambers with dark and light zones in which krill could move freely. Results showed that krill displayed a significant positive phototaxis. Understanding this behavioral response is relevant to development of krill fishing technology to improve scientific sampling gear, improve harvest efficiency, and reduce potential unwanted bycatch.

scholarly journals PERANCANGAN ALAT PENDETEKSI KELAYAKAN OLI PADA KENDARAAN SEPEDA MOTOR BERBASIS ARDUINO UNO ATMEGA328

SIGMA TEKNIKA ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 179
Author(s):  
Muhammad Iirsyam
Keyword(s):  
Light Emitting Diode ◽  
Motor Vehicles ◽  
Light Reflection ◽  
Oil Viscosity ◽  
Light Emitting ◽  
Led Light ◽  
Detection Tool ◽  
Arduino Uno ◽  
Resistance Value ◽  
Oil Color

 AbstrakPada kendaraan bermotor pelumasan adalah suatu hal yang sangat penting. Pelumasan berfungsi untuk melumasi komponen logam atau metal yang bergesekan dalam mesin. Untuk menjaga performa mesin kendaraan tetap prima maka kita harus cermat dalam memilih jenis oli yang akan digunakan menurut tingkat kekentalan oli yang dibutuhkan oleh kendaraan yang kita gunakan. Selain itu pemeriksaan dan pergantian oli secara berkala berperan penting dalam menjaga awetnya mesin kendaraan.Untuk membantu dalam pengecekan oli bagi para pemilik kendaran bermotor dalam hal ini sepeda motor dalam itu peneliti merancang sebuah alat pendeteksi kelayakan oli pada kendaraan sepeda motor. Perubahan nilai resistansi dari sensor IR (Infrared Resistor) setelah menerima pantulan cahaya dari LED (Light Emitting Diode) yang diletakkan diatas permukaan oli menyebabkan tegangan yang diterima Arduino Uno microcontroller ATmega328 membaca perubahan warna oli pada sebuah baki oli sepeda motor. Kata kunci : Pengecekan oli, Pantulan cahaya LED, Arduino Uno   AbstractLubrication in motor vehicles is important, lubrication is not only serves to lubricate metal or metal touching or friction in the machine. To maintain the performance of the vehicle's engine is prime, we must carefully select the type of oil to be used according to the oil viscosity level required by the vehicle we use. In addition, inspection and oil change periodically play an important role in maintaining the vehicle's crew.To assist in oil checking for motorised owners in this motorcycle in this case the author devised an oil feasibility detection tool on a motorcycle vehicle. Changes in resistance value from IR sensor (Infrared Resistor) after receiving light reflection from LED (Light Emitting Diode) that is placed above the oil surface causing the received voltage Arduino Uno Microcontroller ATmega328 Read the changes Oil color on a motorcycle oil tray. Keywords: Oil checking, LED light reflection, Arduino Uno

scholarly journals Effects of Light-Emitting Diodes on the Accumulation of Glucosinolates and Phenolic Compounds in Sprouting Canola (Brassica napus L.)

Foods ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 76 ◽  
Author(s):  
Chang Park ◽  
Nam Kim ◽  
Jong Park ◽  
Sook Lee ◽  
Jong-Won Lee ◽  
...  
Keyword(s):  
Brassica Napus ◽  
Phenolic Compounds ◽  
Light Emitting Diode ◽  
Red Light ◽  
Dry Weight ◽  
Total Phenolic ◽  
Brassica Napus L ◽  
Light Emitting ◽  
Led Light ◽  
Sprout Growth

In this study, we investigated optimal light conditions for enhancement of the growth and accumulation of glucosinolates and phenolics in the sprouts of canola (Brassica napus L.). We found that the shoot lengths and fresh weights of red light-irradiated sprouts were higher than those of sprouts exposed to white, blue, and blue + red light, whereas root length was not notably different among red, blue, white, and blue + red light treatments. The accumulations of total glucosinolates in plants irradiated with white, blue, and red lights were not significantly different (19.32 ± 0.13, 20.69 ± 0.05, and 20.65 ± 1.70 mg/g dry weight (wt.), respectively). However, sprouts exposed to blue + red light contained the lowest levels of total glucosinolates (17.08 ± 0.28 mg/g dry wt.). The accumulation of total phenolic compounds was the highest in plants irradiated with blue light (3.81 ± 0.08 mg/g dry wt.), 1.33 times higher than the lowest level in plants irradiated with red light (2.87 ± 0.05 mg/g dry wt.). These results demonstrate that red light-emitting diode (LED) light is suitable for sprout growth and that blue LED light is effective in increasing the accumulation of glucosinolates and phenolics in B. napus sprouts.

scholarly journals Smart Solar-Powered LED Outdoor Lighting System Based on the Energy Storage Level in Batteries

Buildings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 119
Author(s):  
Suhil Kiwan ◽  
Anwar Abo Mosali ◽  
Adnan Al-Ghasem
Keyword(s):  
Light Emitting Diode ◽  
Lighting System ◽  
Energy Status ◽  
Sustainable Buildings ◽  
Light Emitting ◽  
Led Light ◽  
Smart Control ◽  
Solar Powered ◽  
Conventional Systems ◽  
New System

A novel smart solar-powered light emitting diode (LED) outdoor lighting system is designed, built, and tested. A newly designed controller, that continuously monitors the energy status in the battery and, accordingly, controls the level of illumination of the LED light to satisfy the lighting requirements and/or to keep the light “on” the longest time possible, has been developed. The use of such a reliable solar energy-driven lighting system, with maximum time when the light is “on”, will eliminate the sudden-death of light problem present in conventional photovoltaic (PV) outdoor lights and, therefore, will enhance the natural surveillance and feeling of safety in sustainable buildings and cities. Furthermore, the new smart control eliminates the overdischarge of the system battery and, thus, ensures a longer lifetime of the system battery. Experimental measurements on a system using a 30 W LED light showed that the operating hours of the new system reached 29.16 h (1750 min), while the operating hours for a similar conventional system were 20.86 h (1252 min). Thus, the new lighting system was demonstrated, securing more than 40% of operating hours than the conventional systems.

1.331μm Narrow-Bandwidth Light Source Based on Polymer Micro-Blazed Grating

2008 ◽  
Author(s):  
Hairong Wang ◽  
Xianni Gao ◽  
Guoliang Sun ◽  
Yulong Zhao ◽  
Zhuangde Jiang
Keyword(s):  
Light Source ◽  
Light Emitting Diode ◽  
Low Cost ◽  
Diffraction Order ◽  
Blazed Grating ◽  
Light Emitting ◽  
Led Light ◽  
Narrow Bandwidth ◽  
Narrow Width ◽  
The Cost

In order to detect methane (CH4) accurately and reliably, this paper presents a sensor which consists of infrared diode, fixtures, blazed grating, to realize the extremely narrow-bandwidth light at wavelength of 1.331μm. Based on factors such as compatibility with the transmission characteristics of silica fiber and the cost, a LED (light-emitting diode) with center wavelength of 1.3μm is selected. The LED light is modulated as the parallel light beam. As the light is incident in a micro-blazed grating with certain angle, by diffraction and interference, the light will output the maximum light intensity of its diffraction order at 1.331 μm, which just is an absorption peak of CH4. Micro-blazed grating applied here is low cost and easy replication by various ways, which makes extreme narrow width wavelength possible. Simulation and analysis indicate the designed prototype can output 1.331μm with bandwidth from 1.32907μm to 1.332495μm. With the light source basing on light dividing system, more reliable and higher sensitive measurement of the dangerous gases such as methane and carbon monoxide (CO) can be realized.

Sign in / Sign up

Export Citation Format

Share Document