scholarly journals Sensitive and Selective Extractive Spectrophotometric Method for the Determination of Hydroxyzine Dihydrochloride in Pharmaceuticals

2019 ◽  
Vol 54 (4) ◽  
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiah ◽  
Kanakapura Basavaiah Vinay ◽  
Hosakere Doddarevanna Revanasiddappa
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Ion Pair ◽  
Molar Ratio ◽  
Complexing Agent ◽  
Official Method ◽  
Stoichiometric Ratio ◽  
Experimental Conditions ◽  
Relative Standard

Hydroxyzine dihydrochloride (HDH), a piperazine H1-receptor antagonist and antihistamine, is a rapid acting anxiolytic used principally as an anti-emetic. A sensitive, selective, and precise and accurate spectrophotometric method based on the formation of an ion-pair with orange II (ORG II) as ion-pair complexing agent was developed and validated for the determination of HDH in pharmaceuticals. The chloroform-extractable ion-pair complex exhibited an absorption maximum at 480 nm. Optimization of different experimental conditions is described. Beer’s law is obeyed in the range of 1.5-15 μg mL-1 with an apparent molar absorptivity value of 2.07 x 104 L mol-1 cm-1 and Sandell’s sensitivity value of 0.0216 μg cm-2. The limit of detection (LOD) and limit of quantification (LOQ) are 0.14 and 0.41 μg mL-1, respectively. A Job’s plot of absorbance versus molar ratio of HDH to ORG II indicated (1:2) stoichiometric ratio. Within- and between-day relative standard deviations at three different concentration levels were < 3%. The developed method was successfully applied to commercial tablets. The results obtained were in good agreement with those obtained using the official method. No interference was encountered from co-formulated substances. Recoveries were 96-109 %.

scholarly journals Spectrophotometric and Conductometric Determination of Clomiphene Citrate and Nefazodone HCl

2008 ◽  
Vol 5 (s2) ◽  
pp. 1069-1080 ◽  
Author(s):  
Wafaa S. Hassan ◽  
Mervat M. Hosny
Keyword(s):  
Spectrophotometric Method ◽  
Clomiphene Citrate ◽  
Pharmaceutical Preparations ◽  
Conductometric Titration ◽  
Ion Pair ◽  
Experimental Conditions ◽  
Relative Standard ◽  
Colored Complexes ◽  
Standard Deviations

Two accurate, rapid and simple spectrophotometric and conductometric methods were developed for the determination of clomiphene citrate (CMP) and nefazodone HCl (NFZ), the proposed methods depends upon the reaction of ammonium reineckate with the two studied drugs to form stable precipitate of ion-pair complexes, which was dissolved in suitable solvent. The pink colored complexes were determined colorimetrically at 509, 523.6 nm, respectively. Using the conductometric titration, the studied drugs could be evaluated in 50% (v/v) acetone in the range 60.02-540.18 and 63.3-443.1 μg mL-1for clomiphene citrate and nefazodone HCl, respectively. While for spectrophotometric method the ranges were 0.2-1.8 and 0.2-1.6 mg mL-1for clomiphene citrate and nefazodone HCl respectively. Various experimental conditions were studied. The results obtained showed good recoveries with relative standard deviations of 0.759 and 0.552%. The proposed procedures were applied successfully to the analysis of these drugs in their pharmaceutical preparations and the results were favourably comparable with the official and reference methods. The molar combining ratio reveal that (1:1) (drug : reagent) ion associates were formed.

scholarly journals Extractive spectrophotometric determination of Quetiapine fumarate in pharmaceuticals and human urine using calmagite as an ion-pair reagent

2011 ◽  
Vol 17 (3) ◽  
pp. 259-267 ◽  
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiahf ◽  
Basavaiah Vinay
Keyword(s):  
Human Urine ◽  
Limit Of Detection ◽  
Molar Absorptivity ◽  
Ion Pair ◽  
Official Method ◽  
Quetiapine Fumarate ◽  
Relative Standard ◽  
Significant Difference ◽  
Comparison Of The Results

Quetiapine fumarate (QTF) is an antipsychotic drug belonging to the benzisoxazole derivatives indicated for the treatment of schizophrenia. A sensitive and selective method based on dichloromethane-extractable ion-pair of QTF with calmagite (CGT), which exhibited an absorption maximum at 490 nm, is described. At this wavelength, Beer?s law is obeyed over the concentration range of 3.0 - 30.0 ?g ml-1. The apparent molar absorptivity, limit of detection (LOD) and quantitation (LOQ) values are 1.32 ? 104 l mol-1 cm-1, 0.27 and 0.81 ?g ml-1 respectively. The reaction is extremely rapid at room temperature and the absorbance values remain unchanged upto 19 h. The precision results, expressed as intra-day and inter-day relative standard deviation values, are satisfactory (RSD ? 2.2%). The accuracy is satisfactory as well (RE ? 2.44%). The method was successfully applied to the determination of QTF in pharmaceuticals and spiked human urine with satisfactory results. No interference was observed from common pharmaceutical adjuvants in tablets. Statistical comparison of the results with official method showed an excellent agreement and indicated no significant difference in precision.

Utility of π-acceptor reagents for spectrophotometric determination of sulphonamide drugs via charge-transfer complex formation

2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Faten Nour El-Dien ◽  
Gehad Mohamed ◽  
Eman Frag
Keyword(s):  
Charge Transfer ◽  
Standard Deviation ◽  
Limit Of Detection ◽  
Molar Absorptivity ◽  
Official Method ◽  
Limit Of Quantification ◽  
Experimental Conditions ◽  
Chloranilic Acid ◽  
Relative Standard

AbstractA simple, sensitive and accurate spectrophotometric method for the determination of sulphonamides (sulphamethoxazole (SMZ), sulphaguanidine (SGD), sulphaquinoxaline sodium (SQX), sulphametrole (SMR), and sulphadimidine sodium (SDD)) has been developed. The charge-transfer reactions between sulphonamides as n-electron donors and 7,7,8,8-tetracyanoquinodimethane (TCNQ), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), and 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid, p-CLA) as π-acceptors resulting in highly coloured complexes were studied. Experimental conditions for these CT reactions were carefully optimised. Beer’s law is valid over the concentration ranges from 4–280 µg mL−1, 4–260 µg mL−1, 4–200 µg mL−1, and 4–200 µg mL−1 of SMZ, SGD, SQX, and SDD using DDQ reagent, respectively. While the calibration curves are linear in the concentration ranges from 4–180 µg mL−1, 4–80 µg mL−1, 4–60 µg mL−1, 4–180 µg mL−1, and 4–60 µg mL−1 of SMZ, SGD, SQX, SMR, and SDD, respectively, using TCNQ reagent and from 4–380 µg mL−1 and 4–300 µg mL−1 of SQX and SDD, respectively, using p-CLA reagent, respectively. Different analytical parameters, namely molar absorptivity (ε), standard deviation, relative standard deviation, correlation coefficient, limit of detection, and limit of quantification, were calculated. The results obtained by the proposed methods are in good agreement with those obtained by the official method as indicated by the percent recovery values.

scholarly journals Generic Nonextractive Spectrophotometric Method for Determination of 4-Quino-Naphthollone Antibiotics by Formation of Ion-Pair Complexes with -Naphthol

2006 ◽  
Vol 89 (2) ◽  
pp. 334-340 ◽  
Author(s):  
Ibrahim A Darwish ◽  
Ibrahim H Refaat ◽  
Hassan F Askal ◽  
Mostafa A Marzouq
Keyword(s):  
Spectrophotometric Method ◽  
Dosage Forms ◽  
Ion Pair ◽  
Water Soluble ◽  
Experimental Conditions ◽  
Pharmaceutical Dosage Forms ◽  
Sulfuric Acid Medium ◽  
Quinolone Antibiotics ◽  
Relative Standard

Abstract This paper describes the development of a generic spontaneous nonextractive spectrophotometric method for determination of 13 pharmaceutically important 4-quinolone antibiotics. The method was based on the formation of yellow-colored water-soluble ion-pair complexes between 2% (w/v) -naphthol reagent and each of the studied drugs in sulfuric acid medium at room temperature. The formed ion-pair chromogens have maximum absorption peaks in the range of 365391 nm. The concentrations of the reagents and the experimental conditions affecting the reaction were optimized. Under the optimum conditions, linear relationships with good linear coefficients (0.99870.9995) were found between the absorbance and concentration of the investigated drugs in the range of 10350 g/mL. The assay limits of detection and quantitation were 19.9 and 3.432.9 g/mL, respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the analysis of the investigated drugs in pure and pharmaceutical dosage forms with good accuracy and precision; the percentages of label claim ranged from 97.8102.8 0.351.60%. The results obtained by the proposed spectrophotometric method were comparable with those obtained by the official or reported methods. The proposed method is superior to all the previously reported ion-pair formation-based methods in terms of simplicity because it did not involve extraction procedures for the ion-pair complex. Therefore, this method might be recommended for routine use in quality control laboratories for analysis of the investigated 4-quinolone antibiotics in their pure forms, as well as in pharmaceutical dosage forms.

scholarly journals Determination of cobalt in water samples by atomic absorption spectrometry after pre-concentration with a simple ionic liquid-based dispersive liquid-liquid micro-extraction methodology

2010 ◽  
Vol 8 (3) ◽  
pp. 617-625 ◽  
Author(s):  
Hossein Abdolmohammad-Zadeh ◽  
Elnaz Ebrahimzadeh
Keyword(s):  
Ionic Liquid ◽  
Atomic Absorption Spectrometry ◽  
Atomic Absorption ◽  
Water Samples ◽  
Limit Of Detection ◽  
Absorption Spectrometry ◽  
Experimental Conditions ◽  
Flame Atomic Absorption ◽  
Relative Standard

AbstractA rapid dispersive liquid-liquid micro-extraction (DLLME) methodology based on the application of 1-hexylpyridinium hexafluorophosphate [C6py][PF6] ionic liquid (IL) as an extractant solvent was applied for the pre-concentration of trace levels of cobalt prior to determination by flame atomic absorption spectrometry (FAAS). 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) was employed as a chelator forming a Co-PMBP complex to extract cobalt ions from aqueous solution into the fine droplets of [C6py][PF6]. Some effective factors that influence the micro-extraction efficiency include the pH, the PMBP concentration, the amount of ionic liquid, the ionic strength, the temperature and the centrifugation time which were investigated and optimized. In the optimum experimental conditions, the limit of detection (3s) and the enrichment factor were 0.70 µg L−1 and 60, respectively. The relative standard deviation (RSD) for six replicate determinations of 50 µg L−1 Co was 2.36%. The calibration graph using the pre-concentration system was linear at levels 2–166 µg L−1 with a correlation coefficient of 0.9982. The applicability of the proposed method was evaluated by the determination of trace amounts of cobalt in several water samples.

scholarly journals The Development of a New Kinetic Spectrophotometric Method for the Determination of Vanadium(V) Based on its Catalytic Effect on the Oxidation of Malachite Green Oxalate by Bromate in Acidic and Micellar Medium

2010 ◽  
Vol 7 (4) ◽  
pp. 1612-1620 ◽  
Author(s):  
M. Keyvanfard ◽  
N. Abedi
Keyword(s):  
Malachite Green ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric ◽  
Malachite Green Oxalate

A new, simple, sensitive and selective kinetic spectrophotometric method was developed for the determination of ultra trace amounts of vanadium(V). The method is based on the catalytic effect of vanadium(V) on the oxidation of malachite green oxalate (MG) by bromate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of malachite green oxalate (MG) at 625 nm with a fixed-time method. The decrease in the absorbance of MG is proportional to the concentration of vanadium(V) in the range of 1-100 ng/mL with a fixed time of 0.5-2 min from the initiation of the reaction. The limit of detection is 0.71 ng/mL of vanadium(V). The relative standard deviation for the determination of 5, 30, 50 ng/mL of vanadium(V) was2.5% 2.6%, 2.4% and respectively. The method was applied to the determination of vanadium(V) in water samples.

scholarly journals Determination of Sodium Cromoglycate by a New Kinetic Spectrophotometric Method in Biological Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Mohsen Keyvanfard ◽  
Khadijeh Alizad ◽  
Razieh Shakeri
Keyword(s):  
Standard Deviation ◽  
Sodium Cromoglycate ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A new kinetic spectrophotometric method is described for the determination of ultratrace amounts of sodium cromoglycate (SCG). The method based on catalytic action of SCG on the oxidation of amaranth with periodate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the amaranth at 518 nm, for the first 4 min from initiation of the reaction. Calibration curve was linear in the range of 4.0−36.0 ng mL−1SCG. The limit of detection is 2.7 ng mL−1SCG. The relative standard deviation (RSD) for ten replicate analyses of 12, 20, and 28 ng mL−1SCG was 0.40%, 0.32%, and 0.53%, respectively. The proposed method was used for the determination of SCG in biological samples.

scholarly journals Simple Spectrophotometric Method for Determination of Paroxetine in Tablets Using 1,2-Naphthoquinone-4-Sulphonate as a Chromogenic Reagent

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Ibrahim A. Darwish ◽  
Heba H. Abdine ◽  
Sawsan M. Amer ◽  
Lama I. Al-Rayes
Keyword(s):  
Spectrophotometric Method ◽  
Correlation Coefficients ◽  
Molar Absorptivity ◽  
Official Method ◽  
Calibration Data ◽  
Pharmaceutical Tablets ◽  
Relative Standard ◽  
Label Claim ◽  
Colored Product

Simple and rapid spectrophotometric method has been developed and validated for the determination of paroxetine (PRX) in tablets. The proposed method was based on nucleophilic substitution reaction of PRX with 1,2-naphthoquinone-4-sulphonate (NQS) in an alkaline medium to form an orange-colored product of maximum absorption peak () at 488 nm. The stoichiometry and kinetics of the reaction were studied, and the reaction mechanism was postulated. Under the optimized reaction conditions, Beer's law correlating the absorbance (A) with PRX concentration (C) was obeyed in the range of 1–8 g . The regression equation for the calibration data was: A = 0.0031 + 0.1609 C, with good correlation coefficients (0.9992). The molar absorptivity () was L  1 . The limits of detection and quantitation were 0.3 and 0.8 g , respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the determination of PRX in its pharmaceutical tablets with good accuracy and precisions; the label claim percentage was %. The results obtained by the proposed method were comparable with those obtained by the official method.

scholarly journals DEVELOPMENT AND VALIDATION OF UV-VISIBLE SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF DULOXETINE

2019 ◽  
pp. 27-31
Author(s):  
LIPSA SAMAL ◽  
AMARESH PRUSTY
Keyword(s):  
Spectrophotometric Method ◽  
Spectroscopic Method ◽  
Solvent System ◽  
Spectrophotometric Analysis ◽  
Thiophene Derivative ◽  
Experimental Conditions ◽  
Relative Standard ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop and validate a simple UV spectroscopic method for the determination of duloxetine, which is a thiophene derivative and a selective neurotransmitter reuptake inhibitor for serotonin, norepinephrine, and to lesser degree dopamine. Methods: The UV Spectrophotometric analysis was performed using Shimadzu UV-1800 and Shimadzu UV-1700 spectrophotometer by using solvent system acetonitrile and water in the ratio of 8:2. Detection was performed at a wavelength of 290 nm. Method validation was carried out according to ICH Q2R1 guidelines by taking the parameters linearity, accuracy, precision, ruggedness, and robustness, LOD and LOQ. Results: The UV Spectrophotometric method was found linear in the range of 10-50 μg/ml. The method was rugged and robust with % relative standard deviation less than 2. The extraction recoveries were found to be higher than 99% in all experimental conditions. Conclusion: Based upon the performance characteristics, the proposed method was found accurate, precise and rapid and suitable for the determination of Duloxetine for routine analysis.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

Sign in / Sign up

Export Citation Format

Share Document