scholarly journals The Music of Glass Plate Dance in Silampari Studio of Musi Rawas Regency (The Melodic Element Analysis)

2019 ◽  
Author(s):  
Mark Dhaksa Halilintar ◽  
Heri Wijayanto ◽  
Hanitiya Taufiq Noviantoro
Keyword(s):  
Glass Plate ◽  
Element Analysis

FINITE ELEMENT ANALYSIS OF MECHANICAL DEFORMATION OF CHONDROCYTE TO 2D SUBSTRATE AND 3D SCAFFOLD

2015 ◽  
Vol 15 (05) ◽  
pp. 1550077 ◽  
Author(s):  
JINJU CHEN ◽  
D. L. BADER ◽  
D. A. LEE ◽  
M. M. KNIGHT
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Poisson’S Ratio ◽  
Glass Plate ◽  
Mechanical Deformation ◽  
Poisson's Ratio ◽  
3D Scaffold ◽  
Element Analysis ◽  
Cell Functions

The mechanical properties of cells are important in regulation of many aspects of cell functions. The cell may respond differently to a 2D plate and a 3D scaffold. In this study, the finite element analysis (FEA) was adopted to investigate mechanical deformation of chondrocyte on a 2D glass plate and chondrocyte seeded in a 3D scaffold. The elastic properties of the cell differ in these two different compression tests. This is because that the cell sensed different environment (2D plate and 3D construct) which can alter its structure and mechanical properties. It reveals how the apparent Poisson's ratio of a cell changes with the applied strain depends on its mechanical environment (e.g., the elastic moduli and Poisson's ratios of the scaffold and extracellular matrix) which regulates cell mechanics. In addition, the elastic modulus of the nucleus also plays a significant role in the determination of the Poisson's ratio of the cell for the cells seeded scaffold. It also reveals the intrinsic Poisson's ratio of the cell cannot be obtained by extrapolating the measured apparent Poisson's ratio to zero strain, particularly when scaffold's Poisson's ratio is quite different from the cell.

Deflection and Stress Analysis of Glass Plate in Elastic Deformation Processing

2010 ◽  
Vol 37-38 ◽  
pp. 288-293
Author(s):  
Duc Nam Nguyen ◽  
Ju Long Yuan ◽  
Bing Hai Lv ◽  
Zhe Wu
Keyword(s):  
Finite Element ◽  
Elastic Deformation ◽  
Glass Plate ◽  
Maximum Deflection ◽  
Element Analysis ◽  
Shape Accuracy ◽  
Deformation Processing ◽  
Simply Supported ◽  
Bk7 Glass ◽  
Ultra Precision

As the consumer market in the optics, electronics and aerospace industries grows, the demand of ultra-precision aspheric surface increases. The shape accuracy of the optical lens changes significantly with deformation conditions and optical properties of the lens varies with stress distribution within the lens. Therefore, determining the deflection and stress of glass lens is very important to improve the quality of the lens. In this paper, the deflection and stress theoretical results of BK7 glass plate have been presented in different cases of elastic deformation processing. The results are compared with the finite element analysis (FEA) to demonstrate the robustness and accuracy of algorithm in calculation of stress and deflection. The mentioned finite element models were established using the software Abaqus/CAE. The analytical and FEA results showed that if the edge of plate is simply supported, the maximum deflection is 4 times larger than in the fixed edge case. Otherwise if the edge and centre point of plate is simply supported, the maximum deflection is 2.5 times lower than in the fixed edge case and 11.3 times lower than in the simply supported at edge case.

scholarly journals INVESTIGATION OF GLASS PLATE FAILURE MECHANISM SUBJECTED TO COPPER AND STEEL PROJECTILE IMPACTS

2014 ◽  
Vol 15 (1) ◽  
Author(s):  
Qasim H. Shah ◽  
Kyaw M. Aung
Keyword(s):  
Glass Plate ◽  
Element Analysis ◽  
Projectile Impact ◽  
Spider Web ◽  
Impact Location ◽  
Glass Model ◽  
Glass Target ◽  
Cracking Pattern ◽  
Radial Cracks ◽  
The Impact

ABSTRACT: A glass plate was subjected to impact by spherical copper and steel projectiles at low velocities. The glass failure features consisted of a central Hertzian cone made up of comminuted glass and a spider web like cracking pattern around the cone with circumferential and radial cracks. The objective of the investigation was to determine if the damage caused by copper projectile impact compared to steel projectile impact was higher for the same kinetic energy (K.E.) projectiles and the reason for this phenomenon. For the constant K.E. impact, copper projectile apparently caused higher damage in glass plate. Higher damage was attributed to projectile contact duration and the contact area between the projectile and the glass plate. Finite element analysis using LS-DYNA based upon maximum principal strain failure criterion for laminated glass model was able to predict the failed material under the impact location and the cracking pattern in the glass plate for a biased meshing scheme. Radial cracks in glass target were reported to be 15% higher for copper projectile impact than the steel projectile impact. ABSTRAK: Kepingan kaca dikenakan impak oleh projektil kuprum dan keluli berbentuk sfera pada halaju rendah. Ciri-ciri kegagalan kaca terdiri daripada kon berpusat Hertzian yang melibatkan kaca yang hancur dan corak pecahan berbentuk sesawang lelabah pada keliling kon dengan retakan lilitan dan jejarian. Tujuan penyelidikan adalah untuk menentukan sebab bagaimana  dengan projektil tenaga kinetik yang sama, kerosakan yang diakibatkan oleh impak projektil kuprum berbanding dengan impak projektil keluli adalah lebih tinggi. Untuk impak tenaga kinetik yang malar, projektil kuprum didapati menyebabkan kerosakan yang lebih ke atas kepingan kaca. Kerosakan lebih disebabkan oleh tempoh sentuhan projektil dan kawasan sentuhan di antara projektil dan kepingan kaca. Analisis unsur terhingga menggunakan LS-DYNA berdasarkan kriteria kegagalan terikan utama maksima untuk model kaca berlamina.  Kaedah ini berupaya menjangkakan kegagalan objek pada lokasi impak dan corak retakan pada kepingan kaca untuk skim berjejaring terpincang.  Retakan berjejari pada sasaran kaca didapati 15% lebih tinggi untuk impak projektil kuprum berbandingkan  dengan impak projektil keluli.

Effects of compression during formation on the microstructure of composite hydroxylapatite/plaster implants for bone reconstruction

1988 ◽  
Vol 46 ◽  
pp. 750-751
Author(s):  
J. Hanker ◽  
K. Cowden ◽  
R. Noecker ◽  
P. Yates ◽  
N. Georgiade ◽  
...  
Keyword(s):  
Cosmetic Surgery ◽  
Glass Plate ◽  
Surgical Reconstruction ◽  
Equal Weight ◽  
Sintered Ceramic ◽  
Setting Times ◽  
Excess Water ◽  
Mixture Prior ◽  
Mechanical Strengths ◽  
Calcium Sulfate Hemihydrate

Composites of plaster of Paris (PP) and hydroxylapatite (HA) particles are being applied for the surgical reconstruction of craniofacial bone defects and for cosmetic surgery. Two types of HA particles are being employed, the dense sintered ceramic (DHA) and the porous, coralline hydroxylapatite (PHA) particles. Excess water is expressed out of the moistened HA/PP mixture prior to implantation and setting by pressing it in a non-tapered syringe against a glass plate. This results in implants with faster setting times and greater mechanical strengths. It was therefore of interest to compare samples of the compressed versus noncompressed mixtures to see whether or not any changes in their microstructure after setting could be related to these different properties.USG Medical Grade Calcium Sulfate Hemihydrate (which has the lowest mortar consistency of any known plaster) was mixed with an equal weight of Interpore 200 particles (a commercial form of PHA). After moistening with a minimum amount of water, disc-shaped noncompressed samples were made by filling small holes (0.339 in. diameter x 0.053 in. deep) in polypropylene molds with a microspatula.

Computer programs for the calculation of x-ray intensities emitted by elements in multi-layer structures

1990 ◽  
Vol 48 (2) ◽  
pp. 216-217
Author(s):  
G.F. Bastin ◽  
H.J.M. Heijligers ◽  
J.M. Dijkstra
Keyword(s):  
Software Package ◽  
Light Element ◽  
Matrix Correction ◽  
Excellent Performance ◽  
Element Analysis ◽  
X Ray ◽  
Know How ◽  
Accurate Knowledge ◽  
Layer Structures ◽  
Bulk Matrix

For the calculation of X-ray intensities emitted by elements present in multi-layer systems it is vital to have an accurate knowledge of the x-ray ionization vs. mass-depth (ϕ(ρz)) curves as a function of accelerating voltage and atomic number of films and substrate. Once this knowledge is available the way is open to the analysis of thin films in which both the thicknesses as well as the compositions can usually be determined simultaneously.Our bulk matrix correction “PROZA” with its proven excellent performance for a wide variety of applications (e.g., ultra-light element analysis, extremes in accelerating voltage) has been used as the basis for the development of the software package discussed here. The PROZA program is based on our own modifications of the surface-centred Gaussian ϕ(ρz) model, originally introduced by Packwood and Brown. For its extension towards thin film applications it is required to know how the 4 Gaussian parameters α, β, γ and ϕ(o) for each element in each of the films are affected by the film thickness and the presence of other layers and the substrate.

An improved interference correction for trace element analysis

1992 ◽  
Vol 50 (2) ◽  
pp. 1646-1647
Author(s):  
John J. Donovan ◽  
Donald A. Snyder ◽  
Mark L. Rivers
Keyword(s):  
Trace Element Analysis ◽  
Accurate Estimate ◽  
Simple Expression ◽  
Standard Reference Materials ◽  
Characteristic Line ◽  
Analytical Line ◽  
Element Analysis ◽  
Electron Probe Analysis ◽  
Calculated Concentration ◽  
X Ray

We present a simple expression for the quantitative treatment of interference corrections in x-ray analysis. WDS electron probe analysis of standard reference materials illustrate the success of the technique.For the analytical line of wavelength λ of any element A which lies near or on any characteristic line of another element B, the observed x-ray counts at We use to denote x-ray counts excited by element i in matrix j (u=unknown; s=analytical standard; ŝ=interference standard) at the wavelength of the analytical line of A, λA (Fig. 1). Quantitative analysis of A requires an accurate estimate of These counts can be estimated from the ZAF calculated concentration of B in the unknown C,Bu measured counts at λA in an interference standard of known concentration of B (and containing no A), and ZAF correction parameters for the matrices of both the unknown and the interference standard at It can be shown that:

The Influence of Specimen Thickness in Quantitative Electron Energy Loss Spectroscopy

1980 ◽  
Vol 38 ◽  
pp. 112-113
Author(s):  
Nestor J. Zaluzec
Keyword(s):  
Quantitative Analysis ◽  
Adverse Effects ◽  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Materials Science ◽  
Light Element ◽  
Specimen Thickness ◽  
Element Analysis ◽  
Electron Energy Loss

The application of electron energy loss spectroscopy (EELS) to light element analysis is rapidly becoming an important aspect of the microcharacterization of solids in materials science, however relatively stringent requirements exist on the specimen thickness under which one can obtain EELS data due to the adverse effects of multiple inelastic scattering.1,2 This study was initiated to determine the limitations on quantitative analysis of EELS data due to specimen thickness.

Sign in / Sign up

Export Citation Format

Share Document