scholarly journals Content revision and case study in Metallic Materials

2016 ◽  
Author(s):  
Zhizhong Yuan ◽  
Hua Cheng ◽  
Qixun Dai ◽  
Xiaonong Cheng
Keyword(s):  
Metallic Materials

Growth Mechanism vs Matter Transport in Thermally Growing Oxides on High Temperature Materials: A Brief Survey Based on the Case Study of Alumina Formers

2009 ◽  
Vol 289-292 ◽  
pp. 385-395 ◽  
Author(s):  
Jerzy Jedlinski
Keyword(s):  
Growth Mechanism ◽  
Experimental Approach ◽  
Experimental Results ◽  
Metallic Materials ◽  
High Temperature Materials ◽  
Matter Transport ◽  
Alumina Formers ◽  
Microstructure Morphology ◽  
The Relationship

This paper reviews briefly the relationship between the growth mechanism and matter transport using as an example the best currently applied metallic materials being alumina formers. The attention is paid to the experimental approach as well as to the interpretation procedure of experimental results. The scale structure, microstructure, morphology and phase composition are indicated as factors strongly affecting its growth mechanism. The attempt is made to elucidate the possible relationships between the obtained experimental results and actual scale growth mechanisms operating during oxidation exposures.

On the design strategies for SMA-based morphing actuators: state of the art and common practices applied to a fascinating case study

2020 ◽  
Vol 234 (14) ◽  
pp. 2114-2130
Author(s):  
Alessio Suman ◽  
Elettra Fabbri ◽  
Annalisa Fortini ◽  
Mattia Merlin ◽  
Michele Pinelli
Keyword(s):  
State Of The Art ◽  
Primary Energy ◽  
Aerospace Engineering ◽  
Metallic Materials ◽  
Design Strategies ◽  
Technological Breakthrough ◽  
Flexible Devices ◽  
Cooling Fan ◽  
Basic Ideas

The request of even more stringent restrictions, regarding efficiency and environmental impact of industrial components, determines an optimized use of primary energy but also entails the design of more lightweight, smart and flexible devices, able to adapt their operation as a function of several different inputs. In this framework, the use of a fascinating class of metallic materials, called Shape Memory Alloys (SMAs), could represent a valid support for the designers. The capability of these materials to react to an external stimulus, without continuing to supply energy to external actuators, represents, especially in the aerospace engineering field, a technological breakthrough. The present paper reports the basic ideas and summarizes the important aspects related to the development of SMA-based actuators in relation to the present state of the art. A case study of morphing blades, equipped with embedded SMA strips, for an automotive cooling fan is reported. Finally, some hints, regarding the design process of SMA-based actuators, are proposed.

The Genesis and Internal Dynamics of El Salvador's People's Revolutionary Army, 1970–1976

2014 ◽  
Vol 38 (01) ◽  
pp. 102-129
Author(s):  
ALBERTO MARTÍN ÁLVAREZ ◽  
EUDALD CORTINA ORERO
Keyword(s):  
Latin America ◽  
El Salvador ◽  
Early Years ◽  
Left Wing ◽  
Internal Dynamics ◽  
Internal Coherence ◽  
The 1960S

AbstractUsing interviews with former militants and previously unpublished documents, this article traces the genesis and internal dynamics of the Ejército Revolucionario del Pueblo (People's Revolutionary Army, ERP) in El Salvador during the early years of its existence (1970–6). This period was marked by the inability of the ERP to maintain internal coherence or any consensus on revolutionary strategy, which led to a series of splits and internal fights over control of the organisation. The evidence marshalled in this case study sheds new light on the origins of the armed Salvadorean Left and thus contributes to a wider understanding of the processes of formation and internal dynamics of armed left-wing groups that emerged from the 1960s onwards in Latin America.

Culture and the plasticity of perception

2020 ◽  
Vol 43 ◽  
Author(s):  
Michael Lifshitz ◽  
T. M. Luhrmann
Keyword(s):  
Cultural Context ◽  
Sensory Experience ◽  
Cultural Learning ◽  
The World

Abstract Culture shapes our basic sensory experience of the world. This is particularly striking in the study of religion and psychosis, where we and others have shown that cultural context determines both the structure and content of hallucination-like events. The cultural shaping of hallucinations may provide a rich case-study for linking cultural learning with emerging prediction-based models of perception.

Dual systems for all: Higher-order, role-based relational reasoning as a uniquely derived feature of human cognition

2019 ◽  
Vol 42 ◽  
Author(s):  
Daniel J. Povinelli ◽  
Gabrielle C. Glorioso ◽  
Shannon L. Kuznar ◽  
Mateja Pavlic
Keyword(s):  
Temporal Reasoning ◽  
Higher Order ◽  
Important Case ◽  
Human Cognition ◽  
Relational Reasoning ◽  
Dual Systems ◽  
First Order ◽  
Reasoning System ◽  
Role Based

Abstract Hoerl and McCormack demonstrate that although animals possess a sophisticated temporal updating system, there is no evidence that they also possess a temporal reasoning system. This important case study is directly related to the broader claim that although animals are manifestly capable of first-order (perceptually-based) relational reasoning, they lack the capacity for higher-order, role-based relational reasoning. We argue this distinction applies to all domains of cognition.

Sociocultural memory development research drives new directions in gadgetry science

2019 ◽  
Vol 42 ◽  
Author(s):  
Penny Van Bergen ◽  
John Sutton
Keyword(s):  
Episodic Memory ◽  
Autobiographical Memory ◽  
Developmental Psychology ◽  
Cross Cultural ◽  
Memory Development ◽  
Development Research ◽  
Cultural Research ◽  
New Directions ◽  
Cross Cultural Research

Abstract Sociocultural developmental psychology can drive new directions in gadgetry science. We use autobiographical memory, a compound capacity incorporating episodic memory, as a case study. Autobiographical memory emerges late in development, supported by interactions with parents. Intervention research highlights the causal influence of these interactions, whereas cross-cultural research demonstrates culturally determined diversity. Different patterns of inheritance are discussed.

SEM Examination of a Used Diamond Knife

1971 ◽  
Vol 29 ◽  
pp. 452-453
Author(s):  
J. Temple Black
Keyword(s):  
Electron Microscope ◽  
High Voltage ◽  
High Magnification ◽  
Metallic Materials ◽  
Wide Spread ◽  
Thin Sections ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Scanning Electron ◽  
Diamond Knife

Since its introduction by Fernandez-Moran, the diamond knife has gained wide spread usage as a common material for cutting of thin sections of biological and metallic materials into thin films for examination in the transmission electron microscope. With the development of high voltage E.M. and scanning transmission E.M., microtomy applications will become increasingly important in the preparation of specimens. For those who can afford it, the diamond knife will thus continue to be an important tool to accomplish this effort until a cheaper but equally strong and sharp tool is found to replace the diamond, glass not withstanding.In Figs. 1 thru 3, a first attempt was made to examine the edge of a used (β=45°) diamond knife by means of the scanning electron microscope. Because diamond is conductive, first examination was tried without any coating of the diamond. However, the contamination at the edge caused severe charging during imaging. Next, a thin layer of carbon was deposited but charging was still extensive at high magnification - high voltage settings. Finally, the knife was given a light coating of gold-palladium which eliminated the charging and allowed high magnification micrographs to be made with reasonable resolution.

Observation of secondary slip systems in tungsten bicrystals

1984 ◽  
Vol 42 ◽  
pp. 478-479
Author(s):  
J. R. Fekete ◽  
R. Gibala
Keyword(s):  
Stress Field ◽  
Grain Boundaries ◽  
Deformation Behavior ◽  
Stress Axis ◽  
Polycrystalline Materials ◽  
Slip Systems ◽  
Metallic Materials ◽  
Twist Boundary ◽  
Secondary Slip ◽  
Plane Normal

The deformation behavior of metallic materials is modified by the presence of grain boundaries. When polycrystalline materials are deformed, additional stresses over and above those externally imposed on the material are induced. These stresses result from the constraint of the grain boundaries on the deformation of incompatible grains. This incompatibility can be elastic or plastic in nature. One of the mechanisms by which these stresses can be relieved is the activation of secondary slip systems. Secondary slip systems have been shown to relieve elastic and plastic compatibility stresses. The deformation of tungsten bicrystals is interesting, due to the elastic isotropy of the material, which implies that the entire compatibility stress field will exist due to plastic incompatibility. The work described here shows TEM observations of the activation of secondary slip in tungsten bicrystals with a [110] twist boundary oriented with the plane normal parallel to the stress axis.

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

1996 ◽  
Vol 54 ◽  
pp. 636-637
Author(s):  
D. L. Callahan
Keyword(s):  
Plastic Deformation ◽  
Aluminum Nitride ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Bright Field Image ◽  
Perfectly Plastic ◽  
Contrast Analysis ◽  
Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Sign in / Sign up

Export Citation Format

Share Document