scholarly journals Experimental investigation of dusty plasma characteristics in AC discharge system

2019 ◽  
Vol 13 (28) ◽  
pp. 179-188
Author(s):  
Safaa Ali Hameed
Keyword(s):  
Electron Temperature ◽  
Emission Spectroscopy ◽  
Optical Emission Spectroscopy ◽  
Zinc Dust ◽  
Optical Emission ◽  
Dust Particles ◽  
Discharge System ◽  
Ac Discharge ◽  
Argon Discharge ◽  
Plasma Characteristics

In the present work, the effect of size of zinc dust particles onAC argon discharge characteristics are investigatedexperimentally. The plasma characteristics are determined byusing optical emission spectroscopy (OES) techniques. Theresults illustrated that the electron temperature (Te) in the presentand absent of Zinc dust particle is reduced with increasing ofpressure. The electron temperature decreases with increasing ofZinc dust size. Excitation temperature Tex is reduces withincreasing of Ar pressure in present and absent of zinc dustparticles. The present of Zinc dust reduce the Tex of Ar in bothZinc dust size. The electron density increasing in the present andabsent of both zinc dust size. Furthermore, the introduced of zincdust in AC discharge increasing of ne.

scholarly journals Machine Learning Prediction of Electron Density and Temperature from Optical Emission Spectroscopy in Nitrogen Plasma

Coatings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1221
Author(s):  
Jun-Hyoung Park ◽  
Ji-Ho Cho ◽  
Jung-Sik Yoon ◽  
Jung-Ho Song
Keyword(s):  
Machine Learning ◽  
Electron Temperature ◽  
Real Time ◽  
Electron Density ◽  
Emission Spectroscopy ◽  
Optical Emission Spectroscopy ◽  
Optical Emission ◽  
Plasma Parameters ◽  
Plasma Nitridation

We present a non-invasive approach for monitoring plasma parameters such as the electron temperature and density inside a radio-frequency (RF) plasma nitridation device using optical emission spectroscopy (OES) in conjunction with multivariate data analysis. Instead of relying on a theoretical model of the plasma emission to extract plasma parameters from the OES, an empirical correlation was established on the basis of simultaneous OES and other diagnostics. Additionally, we developed a machine learning (ML)-based virtual metrology model for real-time Te and ne monitoring in plasma nitridation processes using an in situ OES sensor. The results showed that the prediction accuracy of electron density was 97% and that of electron temperature was 90%. This method is especially useful in plasma processing because it provides in-situ and real-time analysis without disturbing the plasma or interfering with the process.

Optical Emission Spectroscopy of Argon Plasma Jet

2013 ◽  
Vol 770 ◽  
pp. 245-248 ◽  
Author(s):  
Kanchaya Honglertkongsakul
Keyword(s):  
Electron Temperature ◽  
Nozzle Exit ◽  
Emission Spectroscopy ◽  
Optical Emission Spectroscopy ◽  
Argon Plasma ◽  
Optical Emission ◽  
Plasma Jet ◽  
Plasma Expansion ◽  
Plasma Parameters ◽  
Argon Plasma Jet

Argon plasma jet in a single-electrode configuration was generated at low temperature and atmospheric pressure by 50 kHz radiofrequency power supply. Optical Emission Spectroscopy (OES) was used to investigate the local emissivity of argon plasma in the range between 200 and 1,100 nm. The spatial distribution of reactive species was measured at different distances of the plasma expansion from the nozzle exit such as 0.0, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 cm. These measurements were obtained to analyze the plasma parameters such as electron temperature and electron density. The effect of distances of the plasma expansion from the nozzle exit on the plasma parameters was studied. The main intensive argon lines were found in the region between 690 and 970 nm. The electron temperature was found in the range of 0.5-1.1 eV. The electron density was found in the range of 4.0x1012-1.2x1013 cm-3. The plasma parameters strongly depended on the distances of the plasma expansion from the nozzle exit.

Examination of aluminium and zinc plasmas from an inductive furnace by spectroscopy

2012 ◽  
Vol 79 (1) ◽  
pp. 25-31
Author(s):  
K. T. A. L. BURM
Keyword(s):  
Electron Temperature ◽  
Thermal Equilibrium ◽  
Emission Spectroscopy ◽  
Optical Emission Spectroscopy ◽  
Steel Strip ◽  
Optical Emission

AbstractThe production of aluminium and zinc plasmas for the deposition of coatings upon steel strip is monitored by optical emission spectroscopy measurements. The plasma is created from an inductive source. The atom and the ion densities as well as the electron temperature are obtained such that the plasma can be characterized. It will be shown that the obtained plasmas are typically highly ionized and deviate from thermal equilibrium.

Sign in / Sign up

Export Citation Format

Share Document