scholarly journals Estimation of noise radiance point sources multichannel direction finding systems resolution by linear prediction method

2021 ◽  
pp. 19-26
Author(s):  
В.В. Джус ◽  
Є.С. Рощупкін ◽  
С.В. Кукобко ◽  
С.В. Герасимов ◽  
Н.Ч. Дроб ◽  
...  
Keyword(s):  
Linear Prediction ◽  
Prediction Method ◽  
Direction Finding ◽  
Point Sources ◽  
Learning Sample ◽  
Prediction Methods

The resolution of multichannel direction finding systems of independent noise radiance point sources is estimated quantitatively under a limited learning sample on the basis of a linear prediction methods “bank” and modified Capon algorithms.

scholarly journals Tabel Prediksi Moyers dan Sitepu terhadap Lebar Mesiodistal Gigi Permanen Pengganti pada Etnis Arab Yaman di Surabaya

2020 ◽  
Vol 8 (1) ◽  
pp. 42
Author(s):  
Firyal Baktir ◽  
Dwi Prijatmoko ◽  
Masniari Novita
Keyword(s):  
Key Words ◽  
Prediction Method ◽  
Mixed Dentition ◽  
Prediction Methods ◽  
Tooth Size ◽  
Cross Sectional ◽  
Caucasian Race ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Cross Sectional Design

There are several methods of analizing tooth size discrepancy in orthodontics include prediction methods for mixed dentition. Prediction method of Moyers and Sitepu most commonly used although both were obtained from 2 different races, Caucasian and Deutromelayu. Yemeni ethnic is one of the ethnic groups settled in Indonesia which descendants of the Caucasian race. The aim of the study was to observed the suitable prediction table for Yemeni ethnic. It was an observasional analitics study consist of 40 samples with cross sectional design. The results showed that slight difference for prediction of Moyers on the maxilla (1.02) and prediction of Sitepu on the mandibula (0.11). As conclusion, the most suitable predicition method for Yemeni ethnic is Moyers’s method for maxila and sitepu’s method for mandibula.   Key words: mesiodistal width permanen teeth, Moyers method, Sitepu method, Yemeni Etnic

scholarly journals Retrieval of frequency spectrum from time-resolved spectroscopic data: comparison of Fourier transform and linear prediction methods

2014 ◽  
Vol 22 (25) ◽  
pp. 30512 ◽  
Author(s):  
Intae Eom ◽  
Eunjin Yoon ◽  
Sung-Hoon Baik ◽  
Yong-Sik Lim ◽  
Taiha Joo
Keyword(s):  
Fourier Transform ◽  
Frequency Spectrum ◽  
Spectroscopic Data ◽  
Linear Prediction ◽  
Prediction Methods ◽  
Time Resolved ◽  
Data Comparison

MDAPlatform: a Component-based Platform for Constructing and Assessing miRNA-disease association Prediction Methods

2021 ◽  
Vol 16 ◽  
Author(s):  
Yayan Zhang ◽  
Guihua Duan ◽  
Cheng Yan ◽  
Haolun Yi ◽  
Fang-Xiang Wu ◽  
...  
Keyword(s):  
Computational Models ◽  
Critical Role ◽  
Prediction Method ◽  
Disease Association ◽  
Prediction Methods ◽  
Comparison Results ◽  
Disease Associations ◽  
Pros And Cons ◽  
Clinical Drugs ◽  
Validation Experiments

Background: Increasing evidence has indicated that miRNA-disease association prediction plays a critical role in the study of clinical drugs. Researchers have proposed many computational models for miRNA-disease prediction. However, there is no unified platform to compare and analyze the pros and cons or share the code and data of these models. Objective: In this study, we develop an easy-to-use platform (MDAPlatform) to construct and assess miRNA-disease association prediction method. Methods: MDAPlatform integrates the relevant data of miRNA, disease and miRNA-disease associations that are used in previous miRNA-disease association prediction studies. Based on the componentized model, it develops differet components of previous computational methods. Results: Users can conduct cross validation experiments and compare their methods with other methods, and the visualized comparison results are also provided. Conclusion: Based on the componentized model, MDAPlatform provides easy-to-operate interfaces to construct the miRNA-disease association method, which is beneficial to develop new miRNA-disease association prediction methods in the future.

Resistance Prediction of Planing Hulls: State of the Art

1993 ◽  
Vol 30 (04) ◽  
pp. 297-307
Author(s):  
John M. Almeter
Keyword(s):  
State Of The Art ◽  
Prediction Method ◽  
Prediction Methods ◽  
Resistance Prediction ◽  
Good For

There are literally dozens of different ways that the boat designer can predict the resistance of planing hulls. The term planing hull is used generically to describe the majority of hard chine boats being built today. No single prediction method is good for all types of planing hulls. Some methods can be relied on to give good predictions for certain boats and other methods can't be relied upon at all. This paper is meant as a reference for designers in selecting resistance prediction methods for planing hulls. It describes numerous resistance prediction methods and gives their variable ranges and the type of planing hulls they are based on or are intended for. Inherent problems or limitations of the methods are stated. The concept of hull shape, which is often neglected in resistance prediction, and its important role are discussed.

scholarly journals Comparison of Prediction Methods for Axial Strength of Grouted Connections with Shear Keys

2020 ◽  
Vol 10 (6) ◽  
pp. 1942
Author(s):  
You Xianhui ◽  
Wu Zhaoqi ◽  
Chen Zehao
Keyword(s):  
Health And Safety ◽  
Prediction Method ◽  
American Petroleum Institute ◽  
Experimental Results ◽  
Offshore Wind ◽  
Prediction Methods ◽  
Compression Tests ◽  
Axial Strength ◽  
Wide Range ◽  
Shear Keys

Grouted connections are commonly used in marine engineering, especially on oil platforms, cross-sea bridges, and offshore wind power turbines. The prediction methods for axial carrying capacity of grouted connections with shear keys and their application ranges in current codes were analyzed in this paper. The calculated results by using different codes were compared based on a practical grouted connection between steel piles and the jacket foundation of a wind turbine. The research team conducted axial compression tests on seven specimens, collected a wide range of experimental results to establish a database, and finally compared the standard calculation results with the experimental results. The study indicates that the axial strength of grouted connections predicted by different methods is distinct. The calculation formula of the British Health and Safety Executive (HSE, 2002) has obvious limitations; specifically, with increased shear keys, strength is overestimated, resulting in insecure design outcome of structures. The results calculated by the Norwegian Det Norske Veritas (DNV, 2013) are generally consistent with the experimental results, in which the reduction effect of multiple shear keys was considered. The prediction method of the American Petroleum Institute (API, 2007), which undervalues the bearing performance of connections, is excessively conservative. The method of the combined Norwegian and German Det Norske Veritas–Germanischer Lloyd (DNV-GL, 2016) has wider applicability and is safe, reliable, and economical.

Precise detection of isolated words in noise by the linear prediction method

1988 ◽  
Vol 84 (S1) ◽  
pp. S15-S15 ◽  
Author(s):  
Hidefumi Kobatake ◽  
Katsuhisa Tawa
Keyword(s):  
Linear Prediction ◽  
Prediction Method

A state-of-the-art review on wind power deterministic prediction

2020 ◽  
pp. 0309524X2094120 ◽  
Author(s):  
Zhongda Tian
Keyword(s):  
Wind Power ◽  
Prediction Method ◽  
Scale Model ◽  
Ensemble Prediction ◽  
Prediction Methods ◽  
Power Prediction ◽  
Continuous Growth ◽  
Advantages And Disadvantages ◽  
Wind Power Prediction ◽  
The Impact

With the continuous growth of wind power access capacity, the impact of intermittent and volatile wind power generation on the grid is becoming more and more obvious, so the research of wind power prediction method has been widely concerned. Accurate wind power prediction can provide necessary support for the power grid dispatching, combined operation of generating units, operation, and maintenance of wind farms. According to the existing wind power prediction methods, the wind power prediction methods are systematically classified according to the time scale, model object, and model principle of prediction. The physical methods, statistical methods include single and ensemble prediction methods related to wind power prediction are introduced in detail. The error evaluation indicator of the prediction method is analyzed, and the advantages and disadvantages of each prediction method and its applicable occasions are given. At the same time, in view of the existing problems in the wind power prediction method, the corresponding improvement plan is put forward. Finally, this article points out that the research is needed for wind power prediction in the future.

A Subspace Based Analysis of the Modified Forward-Backward Linear Prediction Method

1988 ◽  
Vol 34 (5) ◽  
pp. 408-415 ◽  
Author(s):  
V U Reddy ◽  
K Ajayakumari
Keyword(s):  
Linear Prediction ◽  
Prediction Method
Sign in / Sign up

Export Citation Format

Share Document