MODIFIKASI MODEL PEMBELAJARAN TEAM ASSISTED INDIVIDUALIZATION DENGAN STRATEGI PEMBELAJARAN TUGAS DAN PAKSA

Author(s):  
Lea Christy Restu Kinasih ◽  
Dewi Fatimah ◽  
Veranica Julianti

The selection and determination of appropriate learning strategies can improve the results to be obtained from the application of classroom learning models. This writing aims to discipline students to develop individual abilities of students to be more active in the learning process and improve the quality of learning. The learning process in Indonesia in general only uses conventional learning models that make students passive and undeveloped. In order for the quality of learning to increase, the Team Assisted Individualization learning model is combined with the task learning and forced strategies. The Team Assisted Individualization cooperative learning model is one of the cooperative learning models that combines learning individually and in groups. Meanwhile, task and forced learning strategies are strategies that focus on giving assignments that require students to complete them on time so that the learning process can run effectively. Students are required to do assignments according to the given deadline. This makes students become familiar with the tasks given by the teacher. Combining or modifying the learning model of the assisted individualization team with forced and forced learning strategies is expected to be able to make students more active, disciplined, independent, creative in learning and responsible for the tasks assigned. Therefore this method of incorporation is very necessary in the learning process and can be applied to improve the quality of learning in schools.

Author(s):  
Indah Ayu Lestari ◽  
Imam Mustafa Kamal ◽  
Yola Oktariandini

The purpose of this writing is to motivate and encourage teachers to improve the quality of learning with more interesting learning models. In addition, this writing aims to motivate students to be more active in the learning process and can also improve the quality of learning. In general, the implementation of the learning process is only carried out using less varied learning methods that make students tend to be inactive and not develop. These problems must be taken seriously, especially by the teacher. Teachers must be able to inspire students to be actively involved in the learning process. The selection and determination of appropriate learning strategies in accordance with the characteristics of students will certainly produce the desired learning goals. To make it happen, it can be combined with the Realistic Mathematics learning model with Task and Forced Learning Strategies. Realistic Mathematics Learning Model is a learning method that is oriented towards mathematical everyday experiences and applying mathematics in everyday life. Meanwhile, the Task and Forced Learning Strategy is a strategy that focuses on assigning tasks that require students to finish on time so that the learning process can run effectively. Forced and forced learning strategies were chosen to complement and perfect the implementation of realistic mathematics learning models in the classroom. The researcher tried to combine this method in order to be able to see a significant effect on students' understanding in solving problems that occurred. The incorporation of Realistic Mathematics learning models with Task and Forced Learning Strategies is expected to have an influence on increasing students' understanding in completing tasks, and making student learning outcomes better, and expected to be able to make students develop their respective creativity. Keywords: Learning, Realistic Mathematics, Task and Forced Learning Strategies


2021 ◽  
Vol 2104 (1) ◽  
pp. 012015
Author(s):  
N Muhammad ◽  
F Hamid ◽  
M Misbah ◽  
D Dewantara

Abstract This study aims to describe the validity of the electronic module on the elasticity of solids topic through the cooperative learning model to improve students’ learning outcomes and motivation. This research is a research and development with the ADDIE development model. This electronic module was assessed by using the electronic module’s validation sheet. The validators of this e-module consisted of two academics and one practitioner. Based on the validation results, it was obtained that the validity of the electronic module was 3.49 with a valid category. It shows that the electronic module on the elasticity of solids topic through cooperative learning models can be used in the classroom learning process to improve student’s learning outcomes and motivation.


2021 ◽  
Vol 6 (2) ◽  
pp. 128-133
Author(s):  
Yenni Muflihan ◽  
Nur Fajri ◽  
Eka Syani

Successful learning is learning that can make students motivated, fun and comfortable in the teaching and learning process. Cooperative learning is one way for lecturers so that students can enjoy learning. Therefore, it is very important for lecturers to create fun and comfortable student learning without pressure. The purpose of this study was to determine the effect of the application of the TPS type cooperative learning model on students' learning motivation at STIMI Meulaboh. This type of research is experimental research by applying the TPS type cooperative learning model and the results are by distributing questionnaires and observations. The results of this study are the TPS type cooperative learning model has an effect on students' learning motivation. Therefore, it can be said that the TPS type of cooperative learning model is feasible to be used in the Economics I statistics learning process in the classroom to improve students' understanding and quality of learning.


2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Jawane Malau

<p>This research was conducted for the purpose of getting a clear and complete <br />picture conserning the quality of teaching and learning process through eveloping and implementing jigsaw type cooparative learning model for subject of Thermodynamics. The quality of teaching and learning process can be viewed by positive response of university students towards thermodynamics subject using the implemented jigsaw type cooparative learning model. The subject of this research were students of high school class X, semester II in the academic year of 2011/2012, which were listed as learning tools needed for thermodynamics of jigsaw type cooparative learning model. The learning tool which were being developed consist of teaching materials, learning plan, and student worksheet. The research prosedure consisted of developing the tools of teaching and learning process, and the followed by realization of learning in class using the jigsaw type cooparative learning approach. The research instruments were to be observation sheet and student response questionaire towards the learning process. The reseach data were analyzed using percentage statistic. Based on the refection result towards the action which was planned beforehand and also the researh result discussion, it was found that the learning process of hermodynamics which was done by implementing the jigsaw type cooparative learning model can increase student activity in his study. Implementing the jigsaw type cooperative learning can increase the learning result of students. Most of the students who partisipated in the thermodynamics class agree and give a positive apreciation towards the implementation of cooperative learning model. They believe that with the learning group can help them overcoming the learning deterrent. </p><p> </p>


2019 ◽  
Vol 4 (1) ◽  
pp. 208-223
Author(s):  
Nur Hamida Siregar

The quality of education in Indonesia was in the worst position in Asian from 12 countries surveyed in 2010 by PERC, so more efforts by teachers are needed to improve the quality of education. One of the efforts is through the application of good and appropriate learning models to the characteristics of subjects. This study aimed to determine the achievement of learning outcomes of heat transfer subject of students of class VII6 SMP Negeri 2 Ambon through application of a contextual approach in Jigsaw type cooperative learning model. This research was a quantitative descriptive, with 40 students. This study found that the average score of initial achievement was 29.22 (failed qualification). While during the learning process with Jigsaw cooperative learning model, the average cognitive achievement was 83.34 (good qualification), affective was 82.66 (good qualification), and psychomotor was 88.75 (good qualification). While there were formative test results obtained the average achievement score was 74.77 (sufficient qualification), and the average of the final score was 81.71 (good qualification). It can be concluded that the learning process by applying a contextual approach in Jigsaw type cooperative learning model was proven to help students in achieving the learning outcomes of heat transfer subject.


Author(s):  
Tiodora Fermiska Silalahi ◽  
Ahmad Fakhri Hutauruk

In improving the quality of school education and learning in the future, it is necessary to change the mindset that will be used as the basis for implementing a learning program. What's more in the co-19 pandemic period that requires students to be able to study at home without interacting in class for a while. In the past the learning process was conventional, namely face-to-face in class. But even then, most teaching processes are still dominated by teachers. As a result, teaching and learning activities place more emphasis on teaching and not on learning. Learning activities favor the interests of those who teach. Efforts for learning to be focused on students, it is necessary to apply a cooperative learning model which is a form of change in mindset in learning activities at school. However, during this pandemic, the next challenge is how the cooperative process can take place in the online learning process. The absence of a physical meetup becomes an obstacle that can be minimized by the adaptation of the teacher in the distance learning process. In this case the teacher no longer dominates the learning activities, but rather becomes the facilitator and mediator of the process. The cooperative learning model is designed by giving opportunities to students together to build their own knowledge.


2021 ◽  
Vol 2 (1) ◽  
pp. 21-35
Author(s):  
Rani Sugiarni ◽  
Ari Septian ◽  
Dadang Juandi ◽  
Siti Julaeha

Learning models that are not precise have an impact on low student understanding so that the student completeness score is still below 50%, so appropriate action is needed to improve the quality of learning so that students' understanding in learning mathematics increases. The purpose of this study was to determine the increase in mathematical understanding of students by using cooperative learning model type Snawbal throwing. This type of research is classroom action research through 3 cycles. The increase in learning outcomes is determined based on an increase in the average understanding of students, the attainment of absorption and learning completeness. Increment refers to the ratio between the value of cycle I, cycle II and cycle III. The results showed that the implementation of the snowball throwing type of cooperative learning model could improve students' mathematical understanding of set material. It can be seen from the students' average understanding of mathematics increased from 75 (cycle I) to 9 (cycle II), and 82 (cycle III). The increase also occurred in the attainment of absorption and learning completeness. The absorption capacity increased from 50% to 70% and 73%. The learning completeness has increased from 50% to 70% and 73%.


Author(s):  
Nurmaita Putri Handayani ◽  
Siti Kholifaturohmah ◽  
Thania Intan Syahrini

This writing aims to motivate students to be more disciplined in the learning process and can also improve and develop students’ understanding in solving problems. In order for these objectives to be achieved and the quality of learning to increase, the writing of a combination of Inside-Outside Circle Learning Method and Task and Forced Learning Strategies was conducted. The Inside-Outside Circle Learning Method is learning with a system of small circles and large circles in which students share information at the same time with different pairs briefly and regularly. While the Task and Forced Learning Strategy is alearning strategy that emphasizes the discipline and self-awareness of students with the assignment of tasks that force students to finish on time. As for this strategy combined, it is expected to overcome and cover the lack of the Inside-Outside Circle Learning Method. The result of the discussion show that the combination of Inside-Outside Circle Learning Method and Task and Forced Learning Strategies has a major influence on improving student understanding in completing tasks, making student learning outcomes better, students becoming more disciplined and more active in learning, and students accustomed to preparing self by learning before starting teaching and learning activities. Therefore, this combination is very necessary in the learning process and can be applied to improve the quality of learning in schools.


Author(s):  
Dini Yuliani ◽  
Mutiara Bhayangkari ◽  
Maria Ulfah

This writing aims to improve students' understanding by modifying learning models with appropriate learning strategies that are considered based on the characteristics and intellectual development of students to improve learning outcomes. The learning process in Indonesia is currently still centered on teachers which causes students' memory and understanding to be still low. This is the background for the purpose of mind mapping learning models, namely making patterned visual and graphical subject matter that can help strengthen and recall information that has been studied. The selection of the right learning strategy can improve the results that will be obtained from the application of learning models in the classroom. Forced and forced learning strategies are chosen to complement and perfect the implementation of mind mapping learning models in the classroom. This strategy aims to train students' independence and discipline in learning through assignments given with clear time limits and strict penalties if there are students not completing their assignments properly. The combination of mind mapping learning models with forced and task learning strategies can be an alternative to improve the quality of learning in schools. With the increase in thinking power accompanied by student discipline in learning, the learning process in the classroom will run well and get maximum results so that the objectives of the learning can be achieved. For educators it is recommended to implement mind mapping learning models with forced and forced learning strategies in schools, so that learning objectives can be achieved optimally.


Sign in / Sign up

Export Citation Format

Share Document