scholarly journals Sulphur fertilization on biochemical constituents of cabbage (Brassica oleracea var. capitata. L) in non-calcareous soil of Coimbatore district, Tamil Nadu

2021 ◽  
Vol 13 (4) ◽  
pp. 1332-1338
Author(s):  
S. Roshini ◽  
D. Jegadeeswari ◽  
T. Chitdeshwari ◽  
A. Sankari
Keyword(s):  
Ascorbic Acid ◽  
Tamil Nadu ◽  
Crop Production ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenol Content ◽  
Biochemical Constituents ◽  
Coimbatore District

Sulphur is the fourth most important plant nutrient after nitrogen, phosphorus, and potassium, and it is becoming increasingly crucial in high-quality crop production (Bhoyar., 2019). Since limited work has been carried out regarding different sulphur sources on cabbage production in the Coimbatore district, the present study was undertaken to investigate the sulphur sources and levels on various biochemical constituents of cabbage. Hence a  field experiment was conducted in the farmer’s field at Viraliyur village, Thondamuthur block of Coimbatore district, Tamil Nadu to assess the effect of sulphur fertilization on improving the biochemical constituents of cabbage hybrid Saint. There were four different S sources (Elemental sulphur, Potassium sulphate, Gypsum, Single super phosphate) applied at five levels (0, 20, 40, 60 and 80 kg ha-1) and replicated thrice in a factorial randomized block design. The crop was fertilized with a  Soil Test Crop Response-prescribed dose of NPK (200:125:25 kg ha-1). The crop was harvested on 90th day and cabbage heads were analysed for various biochemical constituents like ascorbic acid, total soluble solids (TSS), titratable acidity (TA), chlorophyll content, glucosinolates (GLs), total phenol content (TPC), sulphur containing amino acid (methionine) and antioxidant enzyme activity (peroxidase). The influence of S fertilizers on biochemical constituents increased significantly with increasing levels of sulphur fertilization up to 80 kg S ha-1 excluding ascorbic acid content. The pooled data showed that gypsum applied at 80 kg ha-1 registered the maximum GLs (69.0 µmol g-1), TPC (31.9 mM 100g-1), methionine (32.3%), peroxidase activity (0.70 units min-1mg-1), TSS (7.64 0Brix), TA (0.64%), ascorbic acid (61.4 mg 100g-1) and total chlorophyll (1.21 mg g-1) in cabbage head. The lowest content of biochemical constituents viz., GLs (34.1 µmol g-1), TPC (8.10 mM 100g-1), methionine (17.6%) and peroxidase (0.31 units min-1mg-1) were observed in control applied NPK alone. There were positive and significant changes in the biochemical constituents of cabbage due to S application which confirms the improvement in the quality of cabbage head. The study concluded that gypsum was  the better sulphur source for improving the quality of cabbage.

scholarly journals Quality of Tomato (Solanum lycopersicum L.) Due to Grafting in Solanaceae of Different Species

2019 ◽  
Vol 11 (3) ◽  
pp. 188
Author(s):  
João Lucas Moraes Vieira ◽  
Rogério Eiji Hanada
Keyword(s):  
Block Design ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Control Treatment ◽  
Tomato Cultivar ◽  
Tomato Crop ◽  
Significant Difference ◽  
Four Blocks

The present work had as objective to evaluate the physical-chemical characteristics of commercial tomato fruits grafted on different solanaceous species. The experiment was conducted in a greenhouse, in a randomized complete block design, with four blocks and six treatments, being the rootstocks: cocona (Solanum sessiliflorum); two cultivars of eggplant (Solanum aethiopicum), Long Light Green and Big Hill; jurubebão (Solanum lycocarpum) and jurubeba juna (Solanum stramonifolium), grafted with the tomato cultivar Santa Cruz Kada, and the control treatment was represented by the self-grafted tomato. Three consecutive harvests were spaced seven days after the production stabilization, and the characteristics fruits analyzed were Total Soluble Solids (ºBrix), pH, Titratable Acidity (percentage of citric acid) and TSS/TA. A statistically significant difference was found in the Tukey’s test at 5% probability in the titratable acidity, pH and fruit pulp flavor, among the evaluated treatments, while the soluble solids content did not differ between treatments in any of the harvests, but the values remained within the considered adequate for the tomato in natura in the current literature. There was a decrease in fruit flavor in all treatments, and fruit pH drop in all treatments with the exception of jurubebão, with the advancement of plant age, while the titratable acidity had an inverse behavior. The evaluated rootstocks can be used in the tomato crop, without prejudice to the quality of the tomato fruit produced.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Parâmetros físico-químicos de polpas de fruta produzidas na cidade de Petrolina – PE

2015 ◽  
Vol 10 (4) ◽  
pp. 01 ◽  
Author(s):  
A. C. Honorato ◽  
C. B. R. Dias ◽  
E. B. Souza ◽  
I. R. B. Carvalho ◽  
K. S. M. Sousa
Keyword(s):  
Ascorbic Acid ◽  
Physicochemical Parameters ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Fruit Pulp ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
The City

<p>Este trabalho teve como objetivo avaliar os parâmetros físico-químicos de polpas de fruta produzidas e comercializadas na cidade de Petrolina-PE, tendo como referência a Instrução Normativa nº 1, de 7 jan. 2000, do Ministério da Agricultura que define as características físicas e químicas estabelecendo limites mínimos e máximos específicos para cada polpa de fruta. Foram avaliadas duas marcas (1 e 2) de polpas de abacaxi, cacau, caju, graviola, maracujá e umbu, analisadas quanto aos parâmetros de pH, sólidos solúveis totais (SST), acidez total titulável (ATT), ácido ascórbico, relação SST/ATT e sólidos totais. Os resultados permitem inferir que a marca 2 apresentou qualidade superior na maioria dos parâmetros avaliados quando comparado com a marca 1. Entretanto para alguns sabores de polpa as duas marcas não atenderam os valores padrões. Entre as polpas o único sabor que apresentou os padrões exigidos foi a polpa de caju em ambas as marcas, e a que apresentou resultado de pior qualidade diante dos padrões foi a polpa de maracujá principalmente da marca 1. Dessa forma constata-se que há grandes variações entre as marcas, e entre alguns parâmetros, o que compromete a qualidade das polpas, prejudicando assim o consumidor.</p><p align="center"><strong><em>Physicochemical parameters of fruit pulps produced in Petrolina – PE</em></strong></p><p><strong>Abstract</strong><strong>: </strong>This study aimed to evaluate the physicochemical parameters of fruit pulps produced and marketed in the city of Petrolina-PE, with reference to the Instruction Nº 1 of 7 January 2000 of the Ministry of Agriculture, which defines the physical and chemical characteristics setting minimum and maximum limits specific to each fruit pulp. We evaluated two brands (1 and 2) of pineapple, cocoa, cashew, soursop, passion and umbu fruit pulp, analyzed for pH, total soluble solids (TSS), total titratable acidity (TTA), ascorbic acid, TSS / TTA and total solids parameters. Results show that the brand 2 showed superior in most evaluated parameters when compared to the brand 1. However, for some pulp flavors of both brands did not reached the standards values. Among the pulps, the only flavor that presented the required standards was the cashew pulp in both brands, and presented the results of lower quality on the standards was the passion fruit pulp mainly brand 1. Thus, it appears that there are great variations between brands and between some parameters, which compromises the quality of the pulp, thus impairing the consumer.</p>

scholarly journals Production and quality of banana ‘BRS Conquista’ bagged with different colored polypropylene bags

2019 ◽  
Vol 13 (2) ◽  
pp. 171-177
Author(s):  
Rafaelly Calsavara Martins ◽  
Jackson Mirellys Azevêdo Souza ◽  
Marcelo De Souza Silva ◽  
Nathália De Souza Parreiras ◽  
Marcela Sant'Anna Cordeiro da Silva ◽  
...  
Keyword(s):  
Total Mass ◽  
Mass Number ◽  
New Technologies ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Plastic Bag ◽  
Maturation Index

Worldwide, the second most traded fruit is banana, which is highly appreciated by Brazilian consumers. Moreover, new technologies have been used to improve fruit quality during cultivation. This study aimed to assess the influence of plastic bag colors on the production and quality of banana ‘BRS Conquista’. The treatments consisted of the use of commercial polypropylene bags e colored white, black, red or blue, in addition to the control (non-bagged). This study used a randomized complete block design with five treatments, four replicates and four plants per plot, totalling 80 plants. The assessments consisted of bunch mass; rachis mass; fruit total mass; mean cluster mass; number of fruits per bunch and per cluster; and fruit length and diameter; along with fruits physicochemical traits, such as soluble solids, titratable acidity, pulp/peel ratio and maturation index. The results indicated that no interference was obtained from the different plastic bag colors in the productive variables. However, a greater content of soluble solids was observed in the non-bagged bunches.

Effect of Polyolefin Film on the Quality of Kiwifruit with 1-MCP Treatment in Modified Atmosphere Packages

2011 ◽  
Vol 236-238 ◽  
pp. 2769-2772 ◽  
Author(s):  
Xi Hong Li ◽  
Cheng Jun Wang ◽  
Ai Li Wang ◽  
Yao Xiao ◽  
Yao Tang ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Modified Atmosphere ◽  
Flesh Firmness ◽  
Solids Concentration ◽  
And Control ◽  
Soluble Solids Concentration

Kiwifruit is very perishable especially at 20 °C. The quality of kiwifruit with 1-MCP treatment stored at 20 °C in modified packages was investigated. Three different polyolefin films, including 0.03mm thickness polyethylene (PE), 0.03mm and 0.05mm thickness poly (vinyl chloride) (PVC) films, were used as packaging films. Kiwifruit were fumigated with 1-MCP to delay ripeness and then packaged with the three films and control (air). O2 and CO2 concentrations in the packages, flesh firmness, soluble solids concentration (SSC), titratable acidity (TA) and ascorbic acid were measured. MAP treatments could postpone the increase of TTS, inhibit the reduction of TA, and avoid the decrease of flesh firmness. Kiwifruit packaged in 0.05mm PVC obtained 33% TA more than control fruit and approximate 25 % retention of initial firmness. However, MAP didn’t maintain more ascorbic acid content of kiwifruit. In conclusion, MAP using polyolefin films combination 1-MCP treatment, especially 0.05mm PVC, might be more effective for preserving the quality of kiwifruit.

scholarly journals Production and quality of okra produced with mineral and organic fertilization

2019 ◽  
Vol 23 (2) ◽  
pp. 97-102
Author(s):  
Hemmannuella C. Santos ◽  
Emmanuel M. Pereira ◽  
Rafael L. S. de Medeiros ◽  
Paulo M. de A. Costa ◽  
Walter E. Pereira
Keyword(s):  
Vitamin C ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organic Fertilization ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
Organic Compost

ABSTRACT Okra, Abelmoschus esculentus (L.) Moench, is a vegetable with annual fruit native to hot regions of Africa, well adapted to the conditions of the Northeast and Southeast regions of Brazil, where it is widely used by small farmers. This study aimed to evaluate the effect of mineral and organic fertilization on the production and quality of okra fruits. The experiment was conducted in randomized block design, with three replicates and eleven treatments defined according to a Baconian matrix. Treatments consisted of doses of N (0, 100, 200 and 300 kg ha-1), P (0, 100, 200 and 300 kg ha-1) and K (0, 80, 160 and 240 kg ha-1), as well as absence and presence of organic compost (30 t ha-1). The following parameters were evaluated: plant height, stem diameter, number of leaves, production of fruits plant-1, number of fruits plant-1, fruit length and diameter and fruit quality (pH, soluble solids, titratable acidity, vitamin C and electrical conductivity). The crop is demanding in terms of K and N fertilizations, with increments of 15.8 and 36% in the mean number and diameter of fruits, respectively. Organic fertilization did not influence the vegetative growth of okra, but was beneficial to the production of fruits with higher vitamin C content, 52% higher than the contents found in fruits produced without such input.

scholarly journals Quality parameters of tomatoes submitted to different doses of gamma radiation

2018 ◽  
Vol 21 (0) ◽  
Author(s):  
Ana Carolina Loro ◽  
Victor Wilson Botteon ◽  
Marta Helena Fillet Spoto
Keyword(s):  
Ascorbic Acid ◽  
Gamma Radiation ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Maturation Stage ◽  
Long Life ◽  
Irradiation Process ◽  
Different Doses

Abstract Ionizing radiation can be used for different purposes in the food industry. In this study, the effect of irradiation doses (0, 0.5, 1.0 and 1.5 kGy) on the quality parameters of long life tomatoes (Lycopersicon esculentum Mill.), was evaluated during 4 storage periods (1, 7, 14 and 21 days). The different treatments were evaluated by analysing for colour, pH, total soluble solids (TSS), total titratable acidity (TTA), ratio (TSS/TTA), hardness, total lycopene and ascorbic acid contents, weight loss and maturation stage (O2 /CO2 ratio) for all the storage periods. The tomato samples were irradiated in a Co60 irradiator and maintained at 22 °C ± 1 °C. The quality of the tomato fruits was influenced by the gamma radiation basically by making the fruits softer and not degrading the ascorbic acid and lycopene contents at the doses evaluated. The irradiation process used in the doses evaluated was promising with respect to maintaining the quality parameters of long life tomatoes.

scholarly journals Productivity and quality of irrigated organic yellow passion fruits in deep planting in Southeastern Amazon

2020 ◽  
Vol 42 (4) ◽  
Author(s):  
Wagner de Moura Francisco ◽  
Sebastião Elviro de Araújo Neto ◽  
Thays Lemos Uchôa ◽  
Luís Gustavo de Souza e Souza ◽  
Nilciléia Mendes da Silva
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organic System ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Total Productivity ◽  
Fruit Mass ◽  
Yellow Passion Fruit

Abstract The aim of this work was to evaluate the effect of irrigation and deep planting of tall yellow passion fruit seedlings in the organic system on fruit quality and productivity. A randomized complete block design with 2x4 subdivided plots, with 8 treatments and 4 blocks was used, with irrigated and rainfed systems being plots and 4 planting depths (0.20 m, 0.40 m, 0.60 m and 0.80 m) subplots. Seedlings aged 90 days and 2 m in height were used. Before planting, all stem leaves were removed from seedlings to be buried and to IBA at concentration of 4,000 mg kg-1 was applied. The number of fruits per plant, average fruit mass and total productivity and of 1st and 2nd crops, as well as total soluble solids (TSS), total titratable acidity (TTA), ratio (TSS/TTA), commercial and equatorial diameter classification were estimated. Irrigated planting at depths of 0.20 m and 0.40 m was more productive in the first crop, but there was no difference in the total productivity and in the second crop. Neither irrigation nor plant depth altered the chemical quality of fruits and commercial classification.

scholarly journals Response of growth, yield and quality of small onion (Allium cepa L. var. aggregatum don.) to Tamil Nadu Agricultural University-Water Soluble Fertilizers (TNAU-WSF)

2021 ◽  
Vol 13 (4) ◽  
pp. 1350-1356
Author(s):  
C. Vairavan ◽  
S. Thiyageshwari ◽  
P. Malarvizhi ◽  
T. Saraswathi
Keyword(s):  
Acid Content ◽  
Tamil Nadu ◽  
Block Design ◽  
Foliar Spray ◽  
Crop Productivity ◽  
Water Soluble ◽  
Soluble Solids ◽  
Soil Test ◽  
World Population

Enhancing the food production for the growing world population has needed application of highly sustainable and efficient inputs to produce more food per unit of land. Hence, Tamil Nadu Agricultural University (TNAU), Coimbatore, Tamil Nadu has produced Water soluble fertilizers (WSF) in its maiden attempt and it is necessary to optimize on different crops. Small onion is one of the most important vegetables in the Indian diet and it has high demand but low productivity. To enhance crop productivity and quality of small onions, the application of TNAU-WSF was taken up. A field experiment was laid out in a Randomized block design (RBD) incorporating 8 treatments comprising of application of RDF at100% NPK as TNAU WSF, soil test based application of 75%, 100%, 125% NPK ha-1 as TNAU-WSF with soil application of sulphur (S) and foliar spray of TNAU Liquid multi micronutrient (LMM) and without S and TNAU LMM and absolute control. Each treatment was replicated thrice with onion (CO 4). Soil test based application of 125% NPK ha-1 as TNAU-WSF with sulphur (S) and TNAU LMM recorded significantly higher in plant height (54.01 cm), the number of leaves per bulb (8.56), leaf greenness (67.5 SPAD), root length (5.42 cm), polar bulb diameter (4.38 cm), equatorial bulb diameter (2.72 cm) fresh bulb weight (74.21 g), bulb yield (1751 t ha-1) and quality attributes like total soluble solids (TSS) (14.78 °Brix), ascorbic acid content (15.34 mg 100 g-1), pyruvic acid content (2.27 µmol g-1). However, soil test based application of 100% NPK ha-1 as TNAU-WSF was found to be an ideal rate to attain the economic target yield of the onion crop.

scholarly journals GRAFTING FOR THE RECOVERY OF YELLOW PASSION FRUIT STEM IN ORGANIC SYSTEM

2017 ◽  
Vol 39 (1) ◽  
Author(s):  
MARIA IZABEL FREITAS LINS REZENDE ◽  
SEBASTIÃO ELVIRO ARAÚJO NETO ◽  
CAMILA LUSTOSA ◽  
OSCAR MARIANO HAFLE ◽  
GEAZI PENHA PINTO
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Stem Diameter ◽  
Soluble Solids ◽  
Organic System ◽  
Yield And Quality ◽  
Bridge Type ◽  
Steel Drill

ABSTRACT The aim of the present study was to evaluate the effect of stem repair grafting on the recovery of damaged plants, yield and quality of yellow passion fruits in organic system. The experiment was conducted simulating five stem damages (treatments) in randomized complete block design with four replications of four plants each. After reaching on average 7.3 ± 1.2 mm in stem diameter, plants were perforated at 20, 40, 60 and 80% of the stem diameter with the aid of a steel drill. The reduction in plant stand treatment with 80 % damage reduces plant productivity. Then, bridge-type grafting was performed by connecting the top and bottom of the injury. The grafting success percentage ranged from 81.3 to 95.8% and did not differ between treatments, but the survival rate of plants was lower in treatments with 40 and 80% of injuries. There were no statistically significant differences between treatments for the following variables: number of fruits per plant, average fruit weight, total soluble solids (TSS), total titratable acidity (TTA) and (TSS/TTA) ratio. Recovery stem grafting allows injured plants to maintain the same productivity by up to 60% compared to plants without injuries.

Sign in / Sign up

Export Citation Format

Share Document