scholarly journals Adsorption of crystal violet dye onto olive leaves powder: Equilibrium and kinetic studies

2021 ◽  
Author(s):  
CI Chemistry International
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Crystal Violet ◽  
Low Cost ◽  
Wave Length ◽  
Kinetic Studies ◽  
Absorption Spectrometry ◽  
Isotherm Models ◽  
Olive Leaves ◽  
Crystal Violet Dye

Adsorption of crystal violet dye from aqueous solutions applying olive leaves powder (OLP) as a biosorbent has been examined under various experimental circumstances. The influence of contact time, pH, initial concentration of studied dye and adsorbent dose on the adsorption process has been investigated applying batch experiments. The concentration of remaining dye has been determined using molecular absorption spectrometry at wave length of 580 nm. The maximum removal of studied dye has been realized at pH 7.5 with a percent removal of 99.2% after 20 min of agitation time. Langmuir, Freundlich, and Temkin isotherm models exemplify the best fit for the experimental data; while the elevated adsorption capacity was 181.1 mg.g1. Adsorption kinetics of crystal violet was expected sufficiently with the empirical pseudo-second-order model. Corresponding to the adsorption capacity, olive leaves powder thought as a low cost, effective, and environmentally friendly biosorbent for the removal of crystal violet dye from aqueous solutions.

scholarly journals Parkia speciosa (Petai) pod as a potential low-cost adsorbent for the removal of toxic crystal violet dye

2016 ◽  
Vol 15 ◽  
Author(s):  
Linda Biaw Leng Lim ◽  
Namal Priyantha ◽  
Hui Hsin Cheng ◽  
Nur Afiqah Hazirah
Keyword(s):  
Adsorption Isotherm ◽  
Crystal Violet ◽  
Low Cost ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Medium Ph ◽  
Crystal Violet Dye ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order ◽  
Optimized Conditions

This study focused on the use of Parkia speciosa (Petai) pod as a potential adsorbent for the removal of crystal violet (CV) dye. Batch adsorption isotherm experiments carried out under optimized conditions were fitted to six isotherm models, namely Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Redlich-Peterson and Sips. Of these, the Sips model best described the adsorption isotherm of Petai pod for the removal of CV dye, giving a desirable adsorption capacity (qmax) of 163.2 mg g-1. Adsorption kinetics was found to follow the pseudo-second order, and further, intra-particle diffusion played a significant role. This study also revealed that the adsorption of CV by Petai pod is influenced by the ionic strength of the medium. However, Petai pod showed resilience towards changes in medium pH.  

scholarly journals Adsorption of lead (II) ions onto diatomite from aqueous solution: Mechanism, isotherm and kinetic studies

2015 ◽  
Vol 18 (1) ◽  
pp. 1-10 ◽  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Low Cost ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Ph Range ◽  
Solution Mechanism ◽  
Order Kinetic Equation

<div> <p>This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was studied by varying pH from 2 to 12 at 20 <sup>o</sup>C. In the pH range of 2.0-4.0, the percentage of Pb (II) adsorbed increases slightly as the pH increases. At pH&gt;4, the percentage of Pb (II) adsorbed decreases with increasing pH because hydrolysis and precipitation begin to play an important role in the sorption of Pb (II). At pH 4, the maximum adsorption capacity of diatomite was found to be 26 mg/g. The adsorption isotherms of Pb (II) on diatomite can be described well by the Freundlich model. The regression equation coefficients were calculated and the data fitted to a second-order kinetic equation for removal of Pb (II) ions. The high adsorption capacity of diatomite makes it a suitable low-cost material for the removal of Pb (II) from aqueous solutions.</p> </div> <p>&nbsp;</p>

scholarly journals Efficient removal of crystal violet dye from aqueous solutions by vitreous tuff mineral

2014 ◽  
Vol 35 (12) ◽  
pp. 1508-1519 ◽  
Author(s):  
A. Blanco-Flores ◽  
A. Colín-Cruz ◽  
E. Gutiérrez-Segura ◽  
V. Sánchez-Mendieta ◽  
D.A. Solís-Casados ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Crystal Violet ◽  
Efficient Removal ◽  
Crystal Violet Dye

scholarly journals Adsorption Study of Cu2+ Ions from Aqueous Solutions by Bael Flowers (Aegle marmelos)

2020 ◽  
Vol 11 (4) ◽  
pp. 11891-11904
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Low Cost ◽  
Sem Analysis ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Aegle Marmelos ◽  
Batch Mode ◽  
Initial Ph

In the present study, batch mode adsorption was carried out to investigate the adsorption capacity of dried bael flowers (Aegle marmelos) for the adsorptive removal of Cu(II) ions from aqueous solutions by varying agitation time, initial metal concentration, the dose of adsorbent, temperature, and initial pH of the Cu(II) ion solution. The percentage removal of 98.7% was observed at 50 ppm initial metal ion concentration, 0.5 g/100.00 cm3 adsorbent dosage, within the contact time of 120 minutes at 30 ºC in the pH range of 4 – 7. The sorption processes of Cu(II) ions was best described by pseudo-second-order kinetics. Langmuir isotherm had a good fit with the experimental data with 0.97 of correlation coefficient (R2), and the maximum adsorption capacity obtained was 23.14 mg g-1 at 30 ºC. The results obtained from sorption thermodynamic studies suggested that the adsorption process is exothermic and spontaneous. SEM analysis showed tubular voids on the adsorbent. FTIR studies indicated the presence of functional groups like hydroxyl, –C-O, –C=O, and amide groups in the adsorbent, which can probably involve in metal ion adsorption. Therefore, dried bael flowers can be considered an effective low-cost adsorbent for treating Cu(II) ions.

Degradation of Colored Polystyrene Films

2018 ◽  
Vol 930 ◽  
pp. 254-257 ◽  
Author(s):  
Francisca Pereira de Araújo ◽  
Josy Anteveli Osajima ◽  
Mônica Regina Silva de Araujo ◽  
Edson Cavalcanti da Silva Filho ◽  
João Sammy Nery de Souza
Keyword(s):  
Crystal Violet ◽  
Carbonyl Compounds ◽  
Low Cost ◽  
Chemical Properties ◽  
Polymer Materials ◽  
Visible Radiation ◽  
No Formation ◽  
Crystal Violet Dye ◽  
Physical And Chemical ◽  
And Chemical Properties

Polystyrene is commercial polymer of extensive use in industrial scale due to great physical and chemical properties and low cost. Lifespan of polymer materials can be changed by incorporation of additions to polymeric matrix.The present study aimed to evaluate the influence of crystal violet dye in polystyrene matrices when irradiated by visible radiation. The samples were studied in the form of films, in which solution of crystal violet (5.0x10-4mol.L-1) was added to the PS solution (8% w / w). The films were irradiated with commercial lamp for 150 hours and analyzed with UV-Vis and FTIR. The results showed that the dye degraded at a rate of 16%, however the FTIR analysis revealed that polystyrene did not degrade under the conditions studied, since no formation of carbonyl compounds was observed.

scholarly journals Removal of Cu(II) from Aqueous Solutions Using Amine-Doped Polyacrylonitrile Fibers

2020 ◽  
Vol 10 (5) ◽  
pp. 1738
Author(s):  
Kay Thwe Aung ◽  
Seung-Hee Hong ◽  
Seong-Jik Park ◽  
Chang-Gu Lee
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Naoh Solution ◽  
Surface Modified ◽  
Pan Fibers

Polyacrylonitrile (PAN) fibers were prepared via electrospinning and were modified with diethylenetriamine (DETA) to fabricate surface-modified PAN fibers. The surface-modified PAN fibers were used to evaluate their adsorption capacity for the removal of Cu(II) from aqueous solutions. Batch adsorption experiments were performed to examine the effects of the modification process, initial concentration, initial pH, and adsorbent dose on the adsorption of Cu(II). Kinetic analysis revealed that the experimental data fitted the pseudo-second-order kinetic model better than the pseudo-first-order model. Adsorption equilibrium studies were conducted using the Freundlich and Langmuir isotherm models, and the findings indicated that the PAN fibers modified with 85% DETA presented the highest adsorption capacity for Cu(II) of all analyzed samples. Moreover, the results revealed that the Freundlich model was more appropriate than the Langmuir one for describing the adsorption of Cu(II) onto the modified fibers at various initial Cu(II) concentrations. The maximum adsorption capacity was determined to be 87.77 mg/g at pH 4, and the percent removal of Cu(II) increased as the amount of adsorbent increased. Furthermore, the surface-modified PAN fibers could be easily regenerated using NaOH solution. Therefore, surface-modified PAN fibers could be used as adsorbents for the removal of Cu(II) from aqueous solutions.

scholarly journals Studies on Removal of Cr (VI) from Aqueous Solutions Using Powder of Mosambi Fruit Peelings (PMFP) As a Low Cost Sorbent

2012 ◽  
Vol 9 (3) ◽  
pp. 1389-1399 ◽  
Author(s):  
R. Hema Krishna ◽  
A. V. V. S. Swamy
Keyword(s):  
Particle Size ◽  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Batch Tests ◽  
Freundlich Adsorption Isotherm ◽  
Equilibrium Data ◽  
Agitation Time

The powder of mosambi fruit peelings (PMFP) was used as an adsorbent for the removal of heavy metal like Cr (VI) from aqueous solutions was studied using batch tests. The influence of physico-chemical key parameters such as the initial metal ion concentration, pH, agitation time, adsorbent dosage, and the particle size of adsorbent has been considered in batch tests. Sorbent ability to adsorb Cr (VI) ions was examined and the mechanism involved in the process investigated. The optimum results were determined at an initial metal ion concentration was 10 mg/lit, pH=2, agitation time – 60 min, an adsorbent dose (150 mg/50 ml) and the particle size (0.6 mm). The % adsorption, Langmuir constants [Q0=7.51(mg/g) and b=1.69(mg/lit)] Freundlich constant(Kf=2.94), Lagergren rate constants (Kad(min-1)=5.75 x 10-2) for [Cr(VI)] 10 mg/lit were determined for the adsorption system as a function of sorbate concentration. The equilibrium data obtained were tested using Langmuir, Freundlich adsorption isotherm models, and the kinetic data obtained were fitted to pseudo first order model.

Nano-Mg/Al hydrotalcite: Physicochemical Characterization and Removal of As(III) from Aqueous solutions

2014 ◽  
Vol 1616 ◽  
Author(s):  
E. Ramos-Ramírez ◽  
N. L. Gutiérrez-Ortega ◽  
G. Rangel-Porras ◽  
G. Herrera-Pérez
Keyword(s):  
Adsorption Isotherm ◽  
Aqueous Solutions ◽  
Natural Waters ◽  
Arsenic Removal ◽  
Sol Gel ◽  
Physicochemical Characterization ◽  
Chemical Characterization ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Ionic Exchange

ABSTRACTArsenic is one of the most toxic elements that can be found. Arsenic is mainly emitted by the copper, lead and zinc production, in agriculture as pesticides and herbicides. Two forms of arsenic are common in natural waters: arsenite (AsO33−) and arseniate (AsO43−), referred to as As(III) and As(V). The nano-Mg/Al-hydrotalcites present ionic exchange and adsorbent capacities. In this work, the physic-chemical characterization of nano-Mg/Al-hydrotalcites and his arsenic removal capacityis described. The solids were synthesized by the sol-gel method with Mg/Al=2 and 3 ratio. The solids and their thermal treated products were characterized by XRD, FTIR, DTA, TGA and N2 adsorption. The solids were used as adsorbents As(III) in aqueous solutions. Adsorption isotherm studies of As(III) from aqueous solution are described. The adsorbent capacity was determined using the Langmuir, Freundlich and Dubinin–Radushkevich adsorption isotherm models. The As(III) adsorption isotherm data fit best to the isotherm Freundlich model. The maximum As(III) uptake capacity by nano-Mg/Al-hydrotalcites and the heated solids were determined using the Freundlich equation and were found to 547.46, 660.15, 799.88 and 739.12 mg As(III)/g HT-Mg/Al=2, HT-Mg/Al=3, HT-Mg/Al=2 at 350°C and HT-Mg/Al=3 at 350°C respectively. In the kinetic studies using 40 mg/L concentration of As(III) solutions was obtained an excellent removal capacity in contact times less at one minute.

Sign in / Sign up

Export Citation Format

Share Document