scholarly journals Asymmetry of Caddo Ceramics from the Washington Square Mound Site: An Exploratory Analysis

2018 ◽  
Author(s):  
Robert Z. Selden

While pursuing a study of 3D geometric morphometrics for ceramic burial vessels that often articulate with the Native American Graves Protection and Repatriation Act (NAGPRA) from the ancestral Caddo region, there have been no shortage of potentially meaningful observations, one of which--rotational asymmetry--is discussed here. Using Geomagic Design X (reverse-engineering software) and Geomagic Verify (inspection software), metrics associated with rotational asymmetry were generated and analyzed. Future directions include the incorporation of directional and fluctuating asymmetry measures of the widest vessel profiles, which were calculated in Design X then analyzed using the geomorph package in R. Preliminary results point toward gainful results that can be used to augment more traditional ceramic analyses as well as geometric morphometric studies of ceramic vessel shape.

Author(s):  
P. M. Parés–Casanova ◽  
J. Minoves ◽  
J. Soler ◽  
A. Martínez–Silvestre

Fluctuating asymmetry (FA) refers to subtle differences between left and right sides in bilaterally symmetrical organisms or their parts. Both genetic and environmental changes can increase FA, reflecting deterioration in developmental homeostasis of adult morphology due to a loss of developmental stability. In this study, we used geometric morphometric techniques to examine plastral scute asymmetries in a sample of 31 pure and crossed Testudo species (T. hermanni hermanni n = 23 and crosses with T. hermanni boettgeri n = 8) only females by means of 19 anatomical landmarks. Procrustes ANOVA indicated that FA in crossed individuals was significantly higher than that in pure individuals. Crossed individuals also showed a greater degree of phenotypic plasticity than T. hermanni hermanni. We conclude that crosses among T. hermanni hermanni and T. hermanni boettgeri can increase homozygosity and are responsible for greater developmental instabilities. Nonetheless, more information on crossed phenotypes could be of great interest to raise pure Hermann’s tortoises for reintroduction programmes. Key words: Carapace, Geometric morphometrics, Hybridization, Plastron, Testudines


Author(s):  
Seetharam .K ◽  
Sharana Basava Gowda ◽  
. Varadaraj

In Software engineering software metrics play wide and deeper scope. Many projects fail because of risks in software engineering development[1]t. Among various risk factors creeping is also one factor. The paper discusses approximate volume of creeping requirements that occur after the completion of the nominal requirements phase. This is using software size measured in function points at four different levels. The major risk factors are depending both directly and indirectly associated with software size of development. Hence It is possible to predict risk due to creeping cause using size.


2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Renan Rodrigues Rocha ◽  
Rosana de Mesquita Alves ◽  
Rubens Pasa ◽  
Karine Frehner Kavalco

The Astyanax scabripinnis complex is composed of a large number of almost morphological indistinguishable species, including Astyanax paranae and Astyanax rivularis, which exist in the Paraná and São Francisco Basins, respectively, and sometimes are considered subspecies of the A. scabripinnis group or even are cited just as A. scabripinnis. The two river basins are separated by the Upper Paranaíba Arc, likely the main cause of the isolation of these species. We used geometric morphometric tools and DNA analyses of populations of both species to identify the differences between them. Geometric morphometrics separated the two species into distinct groups, whose main difference was the body depth. This is generally related to the speed of the water flow in the river basins. The maximum likelihood phylogram based on mitochondrial DNA sequences formed two main clades: one composed of the population of A. rivularis and the other, of A. paranae. In the haplotype network, the species were similarly separated into two groups from the same ancestral haplotype, with A. rivularis dispersing into two lineages in the São Francisco River Basin. The distribution of A. paranae is a consequence of a secondary dispersion event in the Paraná River Basin. It forms two lineages from a haplotype derived from the ancestor. The vicariant effect of separate basins, through the elevation of the Upper Paranaíba Arc, led to the allopatric speciation of the populations originating the present species. The results of geometric morphometrics and molecular data of the fish show the importance of this geological event in the biogeography and evolutionary history of the ichthyofauna of the region and indicate that the isolation of these species seems to be effective.


Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2021 ◽  
Vol 11 (17) ◽  
pp. 7848
Author(s):  
Darío Herranz-Rodrigo ◽  
Silvia J. Tardáguila-Giacomozzi ◽  
Lloyd A. Courtenay ◽  
Juan-José Rodríguez-Alba ◽  
Antonio Garrucho ◽  
...  

Recent studies using geometric morphometrics for taphonomy have yielded interesting results, opening new horizons of research in both archaeological and paleontological sites. Here we present the analysis of tooth pits left by male and female individuals of two different carnivore species (Panthera tigris and Panthera pardus) in order to see if sexual dimorphism influences the morphology of tooth pit marks. In the process, 3D-scanning and applied statistics were used. Based on samples derived from two individuals of different sexes, the present results indicate sexual dimorphism in these felid species to not be a conditioning factor of tooth pit morphology.


Author(s):  
Gopalakrishnan T.R. Nair ◽  
Selvarani R

As the object oriented programming languages and development methodologies moved forward, a significant research effort was spent in defining specific approaches and building models for quality based on object oriented measurements. Software metrics research and practice have helped in building an empirical basis for software engineering. Software developers require objectives and valid measurement schemes for the evaluation and improvisation of product quality from the initial stages of development. Measuring the structural design properties of a software system such as coupling, inheritance, cohesion, and complexity is a promising approach which can lead to an early quality assessment. The class codes and class diagrams are the key artifacts in the development of object oriented (OO) software and it constitutes the backbone of OO development. It also provides a solid foundation for the design and development of software with a greater influence over the system that is implemented. This chapter presents a survey of existing relevant works on class code / class diagram metrics in an elaborate way. Here, a critical review of the existing work is carried out in order to identify the lessons learnt regarding the way these studies are performed and reported. This work facilitates the development of an empirical body of knowledge. The classical approaches based on statistics alone do not provide managers and developers with a decision support scheme for risk assessment and cost reduction. One of the future challenges is to use software metrics in a way that they creatively address and handle the key objectives of risk assessment and the estimation of external quality factors of the software.


Author(s):  
K. Velmurugan ◽  
M.A. Maluk Mohamed

One of the vital reasons for reverse engineering legacy software systems is to make it inter-operable. Moreover, technological advancements and changes in usability also motivate reverse engineering to exploit new features and incorporate them in legacy software systems. In this context, Web services are emerging and evolving as solutions for software systems for business applications in terms of facilitating interactions between business to business and business to customers. Web services are gaining significance due to inherent features like interoperability, simple implementation, and exploiting the boom in Internet infrastructure. Thus, this work proposes a framework based strategy using .net for effortless migration from legacy software systems to Web services. Further, this work also proposes that software metrics observed during the process of reverse engineering facilitate design of Web services from legacy systems.


2020 ◽  
Vol 130 (4) ◽  
pp. 800-812 ◽  
Author(s):  
Juan Vrdoljak ◽  
Kevin Imanol Sanchez ◽  
Roberto Arreola-Ramos ◽  
Emilce Guadalupe Diaz Huesa ◽  
Alejandro Villagra ◽  
...  

Abstract The repeatability of findings is the key factor behind scientific reliability, and the failure to reproduce scientific findings has been termed the ‘replication crisis’. Geometric morphometrics is an established tool in evolutionary biology. However, different operators (and/or different methods) could act as large sources of variation in the data obtained. Here, we investigated inter-operator error in geometric morphometric protocols on complex shapes of Liolaemus lizards, as well as measurement error in three taxa varying in their difficulty of digitalization. We also examined the potential for these protocols to discriminate among complex shapes in closely related species. We found a wide range of inter-operator error, contributing between 19.5% and 60% to the total variation. Moreover, measurement error increased with the complexity of the quantified shape. All protocols were able to discriminate between species, but the use of more landmarks did not imply better performance. We present evidence that complex shapes reduce repeatability, highlighting the need to explore different sources of variation that could lead to such low repeatability. Lastly, we suggest some recommendations to improve the repeatability and reliability of geometric morphometrics results.


2013 ◽  
Vol 16 (2) ◽  
pp. 590-600 ◽  
Author(s):  
Paul G. Sanfilippo ◽  
Alex W. Hewitt ◽  
Jenny A. Mountain ◽  
David A. Mackey

Twin studies are extremely useful for investigating hypotheses of genetic influence on a range of behavioral and physical traits in humans. Studies of physical traits, however, are usually limited to size-related biological characteristics because it is inherently difficult to quantify the morphological counterpart – shape. In recent years, the development of geometry-preserving analytical techniques built upon multivariate statistical methodologies has produced a new discipline in biological shape analysis known as geometric morphometrics. In this study of hand shape analysis, we introduce the reader already familiar with the field of twin research to the potential utility of geometric morphometrics and demonstrate the cross-discipline applicability of methods. We also investigate and compare the efficacy of the 2D:4D ratio, a commonly used marker of sexual dimorphism, to the fully multivariate approach of shape analysis in discriminating between male and female sex. Studies of biological shape variation utilizing geometric morphometric techniques may be completed with software freely available on the Internet and time invested to master the small learning curve in concepts and theory.


Sign in / Sign up

Export Citation Format

Share Document