Seismic Response of Vertical Irregular Structures in Setback and Stepped Buildings

2021 ◽  
Vol 2 (1) ◽  
pp. 15-25
Author(s):  
Surendra Bhatta ◽  
Latip Kumar Sharma ◽  
Bharat Niure ◽  
Sudhir Niraula
Keyword(s):  
Seismic Vulnerability ◽  
Response Spectrum ◽  
Plastic Hinge ◽  
Pushover Analysis ◽  
Poor Performance ◽  
Finite Element Software ◽  
Reconnaissance Survey ◽  
Irregular Structure ◽  
Irregular Structures ◽  
Formation Pattern

Vertical irregular buildings are frequently constructed across the globe for functional as well as aesthetic purpose. However post-earthquake reconnaissance survey reports revealed high seismic vulnerability of the building with vertical irregularities. Consequently it is very important to explore the reason behind the high seismic vulnerability and the poor performance of irregular structures during the earthquake. A humble effort is under taken considering several case studies comprising different configuration of vertical irregular structures, so as to comprehend the seismic behavior of vertical irregular structure using response spectrum and pushover analysis has been attempted in finite element software ETABS 16.2.1 version. The results of the analysis indicate the irregular structures have ample chance of higher stress concentration as well as higher displacement demand at the vicinity of irregularity. Member strength enhancement at the vicinity of vertical irregularity may improve the overall seismic performance of the building. Also, this research checks the adequacy of fundamental mode properties for the quantification of vertical irregularity. Furthermore, pushover analysis has been done to observe the hinge formation pattern and also the plastic hinge rotation for observing the performance level of building.

scholarly journals Comparative vulnerability analysis of structure with sand and soft soil

2021 ◽  
Vol 1197 (1) ◽  
pp. 012034
Author(s):  
Swarup Shripurwar ◽  
P B Patil ◽  
Nikhil Pitale ◽  
S Sanghai
Keyword(s):  
Soil Type ◽  
Seismic Vulnerability ◽  
Soft Soil ◽  
Plastic Hinge ◽  
Pushover Analysis ◽  
Vulnerability Index ◽  
Vulnerability Analysis ◽  
Heavy Damage

Abstract World frequently faces the seismic activities at different locations with varying intensities causing heavy damage to the property. Here we are doing Comparative vulnerability study between two soil type which is sand and soft soil. We will analyze two building having same dimensions, beam column sections. This paper represents the comparative vulnerability analysis which have been resulted using pushover analysis. Also the plastic hinge properties have been utilized for calculating the seismic vulnerability index to examine the performance stages of the selected building, complete used software is SAP 2000.

scholarly journals Impact of Plastic Hinge Properties on Capacity Curve of Reinforced Concrete Bridges

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Nasim Shatarat ◽  
Mutasem Shehadeh ◽  
Mohammad Naser
Keyword(s):  
Plastic Hinge ◽  
Pushover Analysis ◽  
Highway Bridges ◽  
Concrete Bridges ◽  
Nonlinear Behaviour ◽  
Nonlinear Properties ◽  
Capacity Curves ◽  
Finite Element Software ◽  
Existing Bridges ◽  
Hinge Model

Pushover analysis is becoming recently the most practical tool for nonlinear analysis of regular and irregular highway bridges. The nonlinear behaviour of structural elements in this type of analysis can be modeled through automated-hinge or user-defined hinge models. The nonlinear properties of the user-defined hinge model for existing highway bridges can be determined in accordance with the recommendations of the Seismic Retrofit Manual by the Federal Highway Administration (FHWA-SRM). Finite element software such as the software SAP2000 offers a simpler and easier approach to determine the nonlinear hinge properties through the automated-hinge model which are determined automatically from the member material and cross section properties. However, the uncertainties in using the automated-hinge model in place of user-defined hinge model have never been addressed, especially for existing and widened bridges. In response to this need, pushover analysis was carried out for four old highway bridges, of which two were widened using the same superstructure but with more attention to seismic detailing requirements. The results of the analyses showed noticeable differences in the capacity curves obtained utilizing the user-defined and automated-hinge models. The study recommends that bridge design manuals clearly ask bridge designers to evaluate the deformation capacities of existing bridges and widened bridges using user-defined hinge model that is determined in accordance with the provisions of the FHWA-SRM.

Seismic Vulnerability Analysis of FRP Retrofitting Industrial Buildings

2015 ◽  
Vol 724 ◽  
pp. 353-357
Author(s):  
Jian Zhu ◽  
Ping Tan ◽  
Pei Ju Chang
Keyword(s):  
Seismic Vulnerability ◽  
Response Spectrum ◽  
Time History ◽  
Seismic Intensity ◽  
Fiber Reinforced Polymers ◽  
Infill Wall ◽  
Intensity Index ◽  
Industrial Buildings ◽  
Dynamic Time ◽  
Masonry Infill Wall

This study focus on derivation of such vulnerability curves using Fiber Reinforced Polymers technologies retrofitted conventional RC industrial frames with masonry infill wall. A set of stochastic earthquake waves which compatible with the response spectrum of China seismic code are created. Dynamic time history analysis is used to compute the random sample of structures. Stochastic damage scatter diagrams based different seismic intensity index are obtained. Seismic vulnerability of FRP-reinforced RC industrial frames is lower than unreinforced frames obviously, and seismic capability of frames using FRP technologies is enhanced especially under major earthquake.

Effect of Pile-Soil-Structure Interaction on the Cable-Stayed Bridge in Response to the Earthquake

2014 ◽  
Vol 539 ◽  
pp. 731-735 ◽  
Author(s):  
Yu Chen
Keyword(s):  
Finite Element ◽  
Seismic Response ◽  
Soil Structure ◽  
Response Spectrum ◽  
Three Dimensional ◽  
Soil Structure Interaction ◽  
Structure Interaction ◽  
Finite Element Software ◽  
Cable Stayed Bridge ◽  
Three Dimensional Finite Element

In this thesis, based on the design of a 140+90m span unusual single tower and single cable plane cable-stayed bridge, free vibration characteristics and seismic response are investigated; three dimensional finite element models of a single tower cable-stayed bridge with and without the pile-soil-structure interaction are established respectively by utilizing finite element software MIDAS/CIVIL, seismic response of Response spectrum and Earthquake schedule are analyzed respectively and compared. By the comparison of the data analysis, for small stiffness span cable-stayed bridge, the pile-soil-structure interaction can not be ignored with calculation and analysis of seismic response.

scholarly journals Evaluation of p-delta effect in structural seismic response

2018 ◽  
Vol 162 ◽  
pp. 04019 ◽  
Author(s):  
Sardasht Sardar ◽  
Ako Hama
Keyword(s):  
Seismic Response ◽  
Pushover Analysis ◽  
Nonlinear Dynamic Analysis ◽  
Time History ◽  
Steel Structure ◽  
Nonlinear Static Analysis ◽  
Structural Behavior ◽  
Finite Element Software ◽  
History Analysis ◽  
Nonlinear Static

Numerous recent studies have assessed the effect of P-Delta on the structures. This paper investigates the effect of P-Delta in seismic response of structures with different heights. For indicating the effect of P-Delta, nonlinear static analysis (pushover analysis) and nonlinear dynamic analysis (Time history analysis) were conducted by using finite element software. The results showing that the P-Delta has a significant impact on the structural behavior mainly on the peak amplitude of building when the height of the structures increased. In addition, comparison has been made between concrete and steel structure.

Building Seismic Vulnerability Study for China High Rises

2013 ◽  
Vol 353-356 ◽  
pp. 2301-2304
Author(s):  
Fan Wu ◽  
Ming Wang ◽  
Xin Yuan Yang
Keyword(s):  
Ground Motion ◽  
Structural Damage ◽  
Seismic Vulnerability ◽  
Fragility Curves ◽  
Response Spectrum ◽  
Earthquake Ground Motion ◽  
Published Data ◽  
Rapid Urbanization ◽  
High Rise ◽  
Story Drift

High-rise buildings, as a result of rapid urbanization in China, become one of popular structure kind. However, there have been few seismic vulnerability studies on high-rise buildings, and few fragility curves have been developed for the buildings. Based on the published data of more than 50 high rises and super high rises, the structural information such as building heights, mode periods, locations and sites, the maximum design story drift ratios, are collected and analyzed. The vulnerability analysis for high rises uses response spectrum displacement as seismic ground motion input, since the structures have comparatively long natural period. Using statistics and regression analysis, the relationship between the maximum story drift ratio and response spectrum displacement is established. Based on height groups and earthquake design codes, the fragility curves of different performance levels can be developed. These curves can provide good loss estimation of high rise structural damage under earthquake ground motion.

scholarly journals SEISMIC ANALYSIS OF MULTISTORIED IRREGULAR AND REGULAR BUILDING WITH MASONARY INFILLS

2021 ◽  
Vol 5 (12) ◽  
Author(s):  
Ashutosh Shrivastava ◽  
Rajesh Chaturvedi
Keyword(s):  
Urban Areas ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Pushover Analysis ◽  
Seismic Zone ◽  
Soft Storey ◽  
High Rise ◽  
Frame Building ◽  
Performance Point ◽  
Open Ground

Nowadays, as in the urban areas the space available for the construction of buildings is limited. So in limited space we have to construct such type of buildings which can be used for multiple purposes such as lobbies, car parking etc. To fulfill this demand, high rise buildings is the only option available. The performance of a high rise building during strong earthquake motion depends on the distribution of stiffness, strength and mass along both the vertical and horizontal directions. If there is discontinuity in stiffness, strength and mass between adjoining storeys of a building then such a building is known as irregular building. The present study focuses on the seismic performance of regular and vertical irregular building with and without masonary infills. In the present study G+11 building is considered for the analysis with modelling and analysis done on ETABS software v17.0.1. The earthquake forces are calculated as per IS 1893 (part 1): 2016 for seismic zone III. The width of strut is calculated by using equivalent diagonal strut method. Total five models are considered for the analysis i.e. regular building with bare frame, regular building with masonary infill, soft storey building with open ground storey, mass irregular building with masonary infill and vertical geometric irregular building with masonary infill. The non-linear static analysis (pushover analysis) and linear dynamic analysis (response spectrum analysis) are performed for all the models and thereby compare their results. From analysis, the parameters like performance point, time period, maximum storey displacement, maximum storey drifts, storey shears and overturning moments are determined and also comparative study is done for all the models. From the comparison, it is observed that the vertical geometric irregular building shows better performance under seismic loading and bare frame building shows inferior performance. Moreover, the performance of masonary infilled frame building is f

scholarly journals Performance Based Seismic Assessment of Masonry Infilled RCC Building with Diaphragm Discontinuity

2020 ◽  
Vol 10 (2) ◽  
pp. 214-220
Keyword(s):  
Seismic Vulnerability ◽  
Pushover Analysis ◽  
Performance Criteria ◽  
Equivalent Linearization ◽  
Inelastic Displacement ◽  
Capacity Spectrum ◽  
Open Ground ◽  
Story Drift ◽  
Performance Based Seismic Design ◽  
Structural Irregularities

In multistoreyed RCC framed buildings, critical damages are due to seismic ground excitations, which cause catastrophic failuresat the weaker locations. Buildings with two types of structural irregularities namely diaphragm discontinuity and open ground story are considered. Assessment of seismic vulnerability of these buildings is done by using Nonlinear Static Pushover Analysis (NSPA). Performance Based Seismic Design of masonry infilled RCC buildings with two different shape of openings in the diaphragm is considered here with Design Basis Earthquake(DBE) and Maximum Considered Earthquake(MCE) where by selecting appropriate performance criteria in terms of Inter-story drift ratio(IDR) and Inelastic displacement demand ratio(IDDR) are critically observed. The Equivalent Linearization Procedure of Pushover analysis presented in FEMA 440, which is a modification of Capacity Spectrum Method based on ATC-40 guidelines, is performed in ETABS-2016 to study the performance of R.C.C. buildings with diaphragm discontinuity, designed as per IS-1893-2016.

scholarly journals Low Cost Frictional Seismic Base-Isolation of Residential New Masonry Buildings in Developing Countries: A Small Masonry House Case Study

2017 ◽  
Vol 11 (1) ◽  
pp. 1026-1035 ◽  
Author(s):  
Ahmad Basshofi Habieb ◽  
Gabriele Milani ◽  
Tavio Tavio ◽  
Federico Milani
Keyword(s):  
Finite Element ◽  
Seismic Vulnerability ◽  
Base Isolation ◽  
Low Cost ◽  
Element Model ◽  
Shaking Table ◽  
Fe Model ◽  
Isolation System ◽  
Finite Element Software ◽  
Non Linear

Introduction:An advanced Finite Element model is presented to examine the performance of a low-cost friction based-isolation system in reducing the seismic vulnerability of low-class rural housings. This study, which is mainly numerical, adopts as benchmark an experimental investigation on a single story masonry system eventually isolated at the base and tested on a shaking table in India.Methods:Four friction isolation interfaces, namely, marble-marble, marble-high-density polyethylene, marble-rubber sheet, and marble-geosynthetic were involved. Those interfaces differ for the friction coefficient, which was experimentally obtained through the aforementioned research. The FE model adopted here is based on a macroscopic approach for masonry, which is assumed as an isotropic material exhibiting damage and softening. The Concrete damage plasticity (CDP) model, that is available in standard package of ABAQUS finite element software, is used to determine the non-linear behavior of the house under non-linear dynamic excitation.Results and Conclusion:The results of FE analyses show that the utilization of friction isolation systems could much decrease the acceleration response at roof level, with a very good agreement with the experimental data. It is also found that systems with marble-marble and marble-geosynthetic interfaces reduce the roof acceleration up to 50% comparing to the system without isolation. Another interesting result is that there was little damage appearing in systems with frictional isolation during numerical simulations. Meanwhile, a severe state of damage was clearly visible for the system without isolation.

Numerical Study on Energy Dissipation and Hysteretic Behavior of Plate-Reinforced Connections

2011 ◽  
Vol 94-96 ◽  
pp. 668-673
Author(s):  
Yan Wang ◽  
Li Ya Zhang ◽  
Shuang Feng ◽  
Xiang Gao
Keyword(s):  
Energy Dissipation ◽  
Numerical Study ◽  
Plastic Hinge ◽  
Hysteretic Behavior ◽  
Cover Plate ◽  
Finite Element Software ◽  
Panel Zone ◽  
Beam Depth ◽  
Flange Thickness ◽  
Reinforced Plate

14 models of plate-reinforced connections are analyzed by finite element software ANSYS. Failure mode, hysteretic behavior, ductility and energy dissipation capacity are comparatively studied. Results show that plastic hinge formed at the end of the reinforced plate, hysteretic cruves are full and the connections have good ductility. With the increase in length and thickness of the reinforced plate, bearing capacity increases while hysteretic behavior and ductility factor decrease. If the reinforced plate is longer than the length that design requires, brittle failure occurs in the panel zone. The recommended length of the reinforced plate is defined as 0.5-0.8 times of beam depth, the thickness of flange-plate is 1.2-1.4 times of flange thickness and the thickness of cover-plate is 0.7-1.2 times of flange thickness.

Sign in / Sign up

Export Citation Format

Share Document