scholarly journals FIELD MEASUREMENT ON THE BASIC PEFORMANCE OF THE NATURAL VENTILATION SYSTEM COMBINED WITH SOLAR CHIMNEY AND UNDERGROUND PIT

2009 ◽  
Vol 74 (636) ◽  
pp. 169-175
Author(s):  
Yoshiteru SHINADA ◽  
Ken-ichi KIMURA
Author(s):  
M. J. Jime´nez ◽  
J. D. Guzma´n ◽  
M. R. Heras ◽  
J. Arce ◽  
J. P. Xama´n ◽  
...  

Natural ventilation in buildings using solar passive systems, such as solar chimneys, has emerged in the last years. Several theoretical and experimental studies in the literature show that their design parameters strongly depend on the ambient conditions, in which they are installed. In order to increase the knowledge of this kind of systems, this work presents the thermal behavior of a stand alone experimental solar chimney during one year. The dimensions of the solar chimney are 5.60 m high, 1.0 m width, and 0.52 m depth. The absorber plate is made of a common reinforced concrete wall of 4.5 m high, 1.0 m wide and 0.15 m depth. This system was designed by Marti´ J., and Heras M.R. in 2003 [1,2] and it is located in the Laboratorio de Ensayos Energe´ticos para Componentes de la Edificacio´n (LECE) in the Plataforma Solar of Almeri´a (PSA) in Spain. The entrance of this solar chimney was redesigned in 2007 by Arce et al. [3] and also the instrumentation of the system was increased and improved. During one year, the solar chimney was monitored and several experimental variables were measured. The results present the temperature profiles of the different measured elements of the solar chimney as well as the air mass flow rate through the solar chimney channel. It was observed that the effect of the outdoor wind added to the thermal effects plays an important role affecting the performance of the solar chimney studied.


Author(s):  
Abayomi Layeni ◽  
Collins Nwaokocha ◽  
Olalekan Olamide ◽  
Solomon Giwa ◽  
Samuel Tongo ◽  
...  

The level of Indoor Air Quality (IAQ) has become a big topic of research, and improving it using passive ventilation methods is imperative due to the cost saving potentials. Designing lecture buildings to use less energy or Zero Energy (ZE) has become more important, and analysing buildings before construction can save money in design changes. This research analyses the performance (thermal comfort [TC]) of a lecture room, investigate the use of passive ventilation methods and determine the energy-saving potential of the proposed passive ventilation method using Computational Fluid Dynamics (CFD). Results obtained showed that air change per hour at a wind velocity of 0.05 m/s was 3.10, which was below standards. Therefore, the lecture hall needs external passive ventilation systems (Solar Chimney [SC]) for improved indoor air quality at minimum cost. Also, it was observed that the proposed passive ventilation (SC) system with the size between 1 and 100 m3, made an improvement upon the natural ventilation in the room. There was a 66.69% increase after 10 years in the saving of energy and cost using Solar Chimney as compared to Fans, which depicts that truly energy and cost were saved using passive ventilation systems rather than mechanical ventilation systems.


2005 ◽  
Vol 11 (22) ◽  
pp. 291-294 ◽  
Author(s):  
Kyosuke HIYAMA ◽  
Shinsuke KATO ◽  
Takeo TAKAHASHI ◽  
Hong HUANG ◽  
Shin KOBAYASHI ◽  
...  

2020 ◽  
Vol 13 (1) ◽  
pp. 201
Author(s):  
Pau Chung Leng ◽  
Gabriel Hoh Teck Ling ◽  
Mohd Hamdan Ahmad ◽  
Dilshan Remaz Ossen ◽  
Eeydzah Aminudin ◽  
...  

The provision requirement of 10% openings of the total floor area stated in the Uniform Building By-Law 1984 Malaysia is essential for natural lighting and ventilation purposes. However, focusing on natural ventilation, the effectiveness of thermal performance in landed residential buildings has never been empirically measured and proven, as most of the research emphasized simulation modeling lacking sufficient empirical validation. Therefore, this paper drawing on field measurement investigates natural ventilation performance in terraced housing with an air-well system. The key concern as to what extent the current air-well system serving as a ventilator is effective to provide better thermal performance is to be addressed. By adopting an existing single-story air-welled terrace house, indoor environmental conditions and thermal performance were monitored and measured using HOBO U12 air temperature and humidity, the HOBO U12 anemometer, and the Delta Ohm HD32.3 Wet Bulb Globe Temperature meter for a six-month duration. The results show that the air temperature of the air well ranged from 27.48 °C to 30.92 °C, with a mean relative humidity of 72.67% to 79.25%. The mean air temperature for a test room (single-sided ventilation room) ranged from 28.04 °C to 30.92 °C, with a relative humidity of 70.16% to 76.00%. These empirical findings are of importance, offering novel policy insights and suggestions. Since the minimum provision of 10% openings has been revealed to be less effective to provide desirable thermal performance and comfort, mandatory compliance with and the necessity of the bylaw requirement should be revisited.


Encyclopedia ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 409-422
Author(s):  
Haihua Zhang ◽  
Yao Tao ◽  
Long Shi

A solar chimney is a renewable energy system used to enhance the natural ventilation in a building based on solar and wind energy. It is one of the most representative solar-assisted passive ventilation systems attached to the building envelope. It performs exceptionally in enhancing natural ventilation and improving thermal comfort under certain climate conditions. The ventilation enhancement of solar chimneys has been widely studied numerically and experimentally. The assessment of solar chimney systems based on buoyancy ventilation relies heavily on the natural environment, experimental environment, and performance prediction methods, bringing great difficulties to quantitative analysis and parameterization research. With the increase in volume and complexity of modern building structures, current studies of solar chimneys have not yet obtained a unified design strategy and corresponding guidance. Meanwhile, combining a solar chimney with other passive ventilation systems has attracted much attention. The solar chimney-based integrated passive-assisted ventilation systems prolong the service life of an independent system and strengthen the ventilation ability for indoor cooling and heating. However, the progress is still slow regarding expanded applications and related research of solar chimneys in large volume and multi-layer buildings, and contradictory conclusions appear due to the inherent complexity of the system.


Author(s):  
B. P. Huynh

Natural-ventilation flow induced in a real-sized rectangular-box room fitted with a solar chimney on its roof is investigated numerically, using a commercial CFD (Computational Fluid Dynamics) software package. The chimney in turn is in the form of a parallel channel with one plate being subjected to uniform solar heat flux. Ventilation rate and air-flow pattern through the room are considered in terms of the heat flux for two different locations of the room’s inlet opening. Chien’s turbulence model of low-Reynolds-number K-ε is used in a Reynolds-Averaged Navier-Stokes (RANS) formulation. It is found that ventilation flow rate increases quickly with solar heat flux when this flux is low, but more gradually at higher flux. At low heat flux, ventilation rate is not significantly affected by location of the inlet opening to the room. On the other hand, at high heat flux, ventilation rate varies substantially with the opening’s location. Location of the inlet opening to the room also affects strongly the air-flow pattern. In any case, ample ventilation rate is readily induced by the chimney.


2022 ◽  
Vol 207 ◽  
pp. 108433
Author(s):  
Hong Hu ◽  
Hideki Kikumoto ◽  
Ryozo Ooka ◽  
Chao Lin ◽  
Bingchao Zhang

Sign in / Sign up

Export Citation Format

Share Document