scholarly journals Solar Chimney Applications in Buildings

Encyclopedia ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 409-422
Author(s):  
Haihua Zhang ◽  
Yao Tao ◽  
Long Shi
Keyword(s):  
Natural Ventilation ◽  
Energy System ◽  
Assisted Ventilation ◽  
Building Envelope ◽  
Building Structures ◽  
Solar Chimney ◽  
Climate Conditions ◽  
And Performance ◽  
Modern Building ◽  
Ventilation Systems

A solar chimney is a renewable energy system used to enhance the natural ventilation in a building based on solar and wind energy. It is one of the most representative solar-assisted passive ventilation systems attached to the building envelope. It performs exceptionally in enhancing natural ventilation and improving thermal comfort under certain climate conditions. The ventilation enhancement of solar chimneys has been widely studied numerically and experimentally. The assessment of solar chimney systems based on buoyancy ventilation relies heavily on the natural environment, experimental environment, and performance prediction methods, bringing great difficulties to quantitative analysis and parameterization research. With the increase in volume and complexity of modern building structures, current studies of solar chimneys have not yet obtained a unified design strategy and corresponding guidance. Meanwhile, combining a solar chimney with other passive ventilation systems has attracted much attention. The solar chimney-based integrated passive-assisted ventilation systems prolong the service life of an independent system and strengthen the ventilation ability for indoor cooling and heating. However, the progress is still slow regarding expanded applications and related research of solar chimneys in large volume and multi-layer buildings, and contradictory conclusions appear due to the inherent complexity of the system.

scholarly journals Análisis teórico de una chimenea solar con tres canales de flujo de aire

2019 ◽  
pp. 13-19
Author(s):  
Angel Tlatelpa-Becerro ◽  
Ramiro Rico-Martínez ◽  
Gustavo Urquiza-Beltrán ◽  
Elva Lilia Reynoso-Jardón
Keyword(s):  
Natural Ventilation ◽  
Single Channel ◽  
Residential Buildings ◽  
Air Flow ◽  
Tropical Region ◽  
Solar Chimney ◽  
Climatic Zones ◽  
The Cost ◽  
Energy Balances ◽  
Ventilation Systems

A solar chimney configuration consisting of three air flow channels divided by two metallic plate, placed in the center of the chimney between two acrylic covers, leading to symmetric air flow, is proposed as an alternative for the design of natural ventilation systems for buildings in tropical and subtropical climatic zones The solar chimney dimensions are 2.0 m height, 1.0 m width, and gap between channels of 0.30 m. These dimensions are appropriate for the design of ventilation systems for residential buildings in central México. A Numerical simulation using the global mass and energy balances in steady state was utilized to evaluate the efficacy of the proposed configuration. The temperature profiles, calculated for a typical hot day in a tropical region, reveal that the configuration is more efficient than the single channel chimney, achieving thermal efficiency values near 75%. This solar chimney configuration can be used with better results than the traditional design as an alternative for natural ventilation systems in residential buildings without a significant increase in the cost of the residence investment.

Evaluation of Passive Cooling Systems for Residential Buildings in the Kingdom of Saudi Arabia

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Alaa Alaidroos ◽  
Moncef Krarti
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Evaporative Cooling ◽  
Building Envelope ◽  
Passive Cooling ◽  
Peak Demand ◽  
Cooling Systems ◽  
Climate Conditions ◽  
End Use ◽  
Passive Cooling Systems

In this paper, passive cooling strategies have been investigated to evaluate their effectiveness in reducing cooling thermal loads and air conditioning energy consumption for residential buildings in Kingdom of Saudi Arabia (KSA). Specifically, three passive cooling techniques have been evaluated including natural ventilation, downdraft evaporative cooling, and earth tube cooling. These passive cooling systems are applied to a prototypical KSA residential villa model with an improved building envelope. The analysis has been carried using detailed simulation tool for several cities representing different climate conditions throughout KSA. The impact of the passive cooling systems is evaluated on both energy consumption and electrical peak demand for residential villas with and without improved building envelope for five cities, representatives of various climate conditions in KSA. It is found that both natural ventilation and evaporative cooling provide a significant reduction in cooling energy use and electrical peak demand for the prototypical villa located in dry KSA climates such as that of Riyadh and Tabuk. Natural ventilation alone has reduced the cooling energy end-use by 22%, while the evaporative cooling system has resulted in 64% savings in cooling energy end-use. Moreover, the natural ventilation is found to have a high potential in all KSA climates, while evaporative cooling can be suitable only in hot and dry climates such as Riyadh and Tabuk. Finally, the analysis showed that natural ventilation provided the lowest electrical peak demand when applied into the improved envelope residential buildings in all five cities in KSA.

scholarly journals Computational Analysis of a Lecture Room Ventilation System

2020 ◽  
Author(s):  
Abayomi Layeni ◽  
Collins Nwaokocha ◽  
Olalekan Olamide ◽  
Solomon Giwa ◽  
Samuel Tongo ◽  
...  
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Natural Ventilation ◽  
Ventilation System ◽  
Minimum Cost ◽  
Solar Chimney ◽  
Lecture Room ◽  
Room Ventilation System ◽  
Ventilation Systems

The level of Indoor Air Quality (IAQ) has become a big topic of research, and improving it using passive ventilation methods is imperative due to the cost saving potentials. Designing lecture buildings to use less energy or Zero Energy (ZE) has become more important, and analysing buildings before construction can save money in design changes. This research analyses the performance (thermal comfort [TC]) of a lecture room, investigate the use of passive ventilation methods and determine the energy-saving potential of the proposed passive ventilation method using Computational Fluid Dynamics (CFD). Results obtained showed that air change per hour at a wind velocity of 0.05 m/s was 3.10, which was below standards. Therefore, the lecture hall needs external passive ventilation systems (Solar Chimney [SC]) for improved indoor air quality at minimum cost. Also, it was observed that the proposed passive ventilation (SC) system with the size between 1 and 100 m3, made an improvement upon the natural ventilation in the room. There was a 66.69% increase after 10 years in the saving of energy and cost using Solar Chimney as compared to Fans, which depicts that truly energy and cost were saved using passive ventilation systems rather than mechanical ventilation systems.

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Impact of Air Infiltration on IAQ and Ventilation Efficiency in Higher Educational Classrooms in Spain

2021 ◽  
Vol 13 (12) ◽  
pp. 6875
Author(s):  
Irene Poza-Casado ◽  
Raquel Gil-Valverde ◽  
Alberto Meiss ◽  
Miguel Ángel Padilla-Marcos
Keyword(s):  
Natural Ventilation ◽  
Well Being ◽  
Cold Season ◽  
Climate Conditions ◽  
Air Infiltration ◽  
Ventilation Efficiency ◽  
Educational Buildings ◽  
Set Up ◽  
Total Volatile Organic Compounds ◽  
The Impact

Indoor air quality (IAQ) in educational buildings is a key element of the students’ well-being and academic performance. Window-opening behavior and air infiltration, generally used as the sole ventilation sources in existing educational buildings, often lead to unhealthy levels of indoor pollutants and energy waste. This paper evaluates the conditions of natural ventilation in classrooms in order to study how climate conditions affect energy waste. For that purpose, the impact of the air infiltration both on the IAQ and on the efficiency of the ventilation was evaluated in two university classrooms with natural ventilation in the Continental area of Spain. The research methodology was based on site sensors to analyze IAQ parameters such as CO2, Total Volatile Organic Compounds (TVOC), Particulate Matter (PM), and other climate parameters for a week during the cold season. Airtightness was then assessed within the classrooms and the close built environment by means of pressurization tests, and infiltration rates were estimated. The obtained results were used to set up a Computational Fluid Dynamics (CFD) model to evaluate the age of the local air and the ventilation efficiency value. The results revealed that ventilation cannot rely only on air infiltration, and, therefore, specific controlled ventilation strategies should be implemented to improve IAQ and to avoid excessive energy loss.

scholarly journals Proposing Alternative Solutions to Enhance Natural Ventilation Rates in Residential Buildings in the Cfa Climate Zone of Rasht

2021 ◽  
Vol 13 (2) ◽  
pp. 679
Author(s):  
Roya Aeinehvand ◽  
Amiraslan Darvish ◽  
Abdollah Baghaei Daemei ◽  
Shima Barati ◽  
Asma Jamali ◽  
...  
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Ventilation Rate ◽  
Humid Climate ◽  
The Sustainable Development ◽  
Passive Strategies ◽  
Development Goals ◽  
Ventilation Rates ◽  
Ventilation Systems

Today, renewable resources and the crucial role of passive strategies in energy efficiency in the building sector toward the sustainable development goals are more indispensable than ever. Natural ventilation has traditionally been considered as one of the most fundamental techniques to decrease energy usage by building dwellers and designers. The main purpose of the present study is to enhance the natural ventilation rates in an existing six-story residential building situated in the humid climate of Rasht during the summertime. On this basis, two types of ventilation systems, the Double-Skin Facade Twin Face System (DSF-TFS) and Single-Sided Wind Tower (SSWT), were simulated through DesignBuilder version 4.5. Then, two types of additional ventilation systems were proposed in order to accelerate the airflow, including four-sided as well as multi-opening wind towers. The wind foldable directions were at about 45 degrees (northwest to southeast). The simulation results show that SSWT could have a better performance than the aforementioned systems by about 38%. Therefore, the multi-opening system was able to enhance the ventilation rate by approximately 10% during the summertime.

scholarly journals Indoor Airflow Distribution in Repository Design: Experimental and Numerical Microclimate Analysis of an Archive

Buildings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 152
Author(s):  
Karin Kompatscher ◽  
Rick P. Kramer ◽  
Bart Ankersmit ◽  
Henk L. Schellen
Keyword(s):  
Vertical Gradient ◽  
Building Envelope ◽  
Cfd Modeling ◽  
Indoor Climate ◽  
Ambient Conditions ◽  
Climate Control ◽  
Climate Conditions ◽  
Airflow Distribution ◽  
Air Mixing ◽  
Delay Variations

The majority of cultural heritage is stored in archives, libraries and museum storage spaces. To reduce degradation risks, many archives adopt the use of archival boxes, among other means, to provide the necessary climate control and comply with strict legislation requirements regarding temperature and relative air humidity. A strict ambient indoor climate is assumed to provide adequate environmental conditions near objects. Guidelines and legislation provide requirements for ambient indoor climate parameters, but often do not consider other factors that influence the near-object environment, such as the use of archival boxes, airflow distribution and archival rack placement. This study aimed to provide more insight into the relation between the ambient indoor conditions in repositories and the hygrothermal conditions surrounding the collection. Comprehensive measurements were performed in a case study archive to collect ambient, local and near-object conditions. Both measurements and computational fluid dynamics (CFD) modeling were used to research temperature/relative humidity gradients and airflow distribution with a changing rack orientation, climate control strategy and supply as well as exhaust set-up in a repository. The following conclusions are presented: (i) supplying air from one air handling unit to multiple repositories on different floors leads to small temperature differences between them. Differences in ambient and local climates are noticed; (ii) archival boxes mute and delay variations in ambient conditions as expected—however, thermal radiation from the building envelope may have a large influence on the climate conditions in a box; (iii) adopting night reduction for energy conservation results in an increased influence of the external climate, with adequate insulation, this effect should be mitigated; and (iv) the specific locations of the supply air and extraction of air resulted in a vertical gradient of temperature and insufficient mixing of air, and adequate ventilation strategies should enhance sufficient air mixing in combination with the insulation of external walls, and gradient forming should be reduced.

Sign in / Sign up

Export Citation Format

Share Document