scholarly journals EVALUATION METHOD OF SLIP PHENOMENA FOR SHEAR WALLS WITH HING ISOLATED STRUCTURAL SYSTEM

2009 ◽  
Vol 74 (635) ◽  
pp. 113-120
Author(s):  
Hiroyuki TOMATSURI ◽  
Hisahiro HIRAISHI
Keyword(s):  
Evaluation Method ◽  
Shear Walls ◽  
Structural System

scholarly journals Analisis Pengaruh Lokasi Dinding Geser Terhadap Pergeseran Lateral Bangunan Bertingkat Beton Bertulang 5 Lantai

2021 ◽  
Vol 4 (1) ◽  
pp. 16
Author(s):  
Leonardus Setia Budi Wibowo ◽  
Dermawan Zebua
Keyword(s):  
Lateral Displacement ◽  
Shear Walls ◽  
Seismic Loading ◽  
Shear Wall ◽  
Structural System ◽  
Earthquake Force ◽  
Earthquake Resistant ◽  
Story Drift ◽  
Frame System ◽  
Rc Shear Wall

Indonesia is one of the countries in the earthquake region. Therefore, it is necessary to build earthquake-resistant buildings to reduce the risk of material and life losses. Reinforced Concrete (RC) shear walls is one of effective structure element to resist earthquake forces. Applying RC shear wall can effectively reduce the displacement and story-drift of the structure. This research aims to study the effect of shear wall location in symmetric medium-rise building due to seismic loading. The symmetric medium rise-building is analyzed for earthquake force by considering two types of structural system. i.e. Frame system and Dual system. First model is open frame structural system and other three models are dual type structural system. The frame with shear walls at core and centrally placed at exterior frames showed significant reduction more than 80% lateral displacement at the top of structure.

Nonlinear modelling and seismic behaviour of precast concrete structures with steel shear walls

2016 ◽  
Vol 49 (4) ◽  
pp. 293-304
Author(s):  
Farhad Behnamfar ◽  
Rafeek Artoonian ◽  
Mehdi Ghandil
Keyword(s):  
Precast Concrete ◽  
Shear Walls ◽  
Structural System ◽  
Concrete Frames ◽  
Seismic Behaviour ◽  
Fem Model ◽  
Shell Elements ◽  
Connection Type ◽  
Nonlinear Static ◽  
Good Agreement

A new structural system consisting of precast concrete frames and steel shear walls (SSW's) is introduced and studied numerically in this paper. Two different models, first using ''exact'' FEM and second using approximate equivalent strip model (ESM), are utilized for analysis of such a system with nonlinear static (pushover) procedure. In the FEM model use is made of shell elements while the ESM benefits from simple links that replace the wall panels in the model and are oriented such that they work in tension. Because of good agreement observed between the results of the models in smaller structures, for taller buildings only the ESM approach is followed where computationally applying the FEM approach is impractical. The lateral behaviour of the systems under consideration is investigated with regard to parameters such as number of stories and beam-column connection type. As a result, the ductility, overstrength and response modification factors are calculated for this new structural system as quantities required for their practical design.

Research of Short-Leg Shear Wall Structure System Function in Multiple Coupled Field

2012 ◽  
Vol 594-597 ◽  
pp. 2464-2469
Author(s):  
Dai Kui
Keyword(s):  
Structural Design ◽  
Shear Walls ◽  
Shear Wall ◽  
Structure Design ◽  
Wall Structure ◽  
Structural System ◽  
Field Coupling ◽  
Structural Rigidity ◽  
Story Drift ◽  
Force Characteristics

Calculation of Short-leg shear walls structural system is a multi-field coupling problem. Through the research and application of short-leg shear wall structure calculation theory, based on the national codes,the short-leg shear wall design principles are established.It is discussed for the reason of the world's first short-leg shear wall structure design formation and development research. According to short-leg shear wall force characteristics, horizonal displacement is divided into destructive story drift and harmless story drift, the formula for calculating the destructive story drift is obtained, using destructive story drift angle parameters and the change of main section height to control the deformation, to control structural rigidity to ensure the structural design rational purpose.

Behaviour of coupled non-linear shear walls

1978 ◽  
Vol 5 (3) ◽  
pp. 367-373
Author(s):  
O. A. Pekau ◽  
Vladimir Gocevski
Keyword(s):  
Seismic Performance ◽  
Shear Walls ◽  
Lateral Load ◽  
Structural System ◽  
Preliminary Assessment ◽  
Total Height ◽  
Non Linear ◽  
Linear Shear

This paper describes an investigation of coupled non-linear shear walls subjected to lateral load increasing monotonically up to overall collapse. Overall collapse includes base hinges in walls as well as yielding of connecting elements over either all or some portion of the total height. Curves useful for preliminary assessment of potential seismic performance of a structural system are generated following a parametric scheme. Particular attention is focused on connecting beam as well as system ductility capacities required to achieve overall collapse.

scholarly journals Perusal of Multi Storey Light Frame Shear Wall by Manual Check and Finite Element Method

2019 ◽  
Vol 8 (6) ◽  
pp. 569-574
Keyword(s):  
Seismic Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
Seismic Loads ◽  
Lateral Loads ◽  
Structural System ◽  
Reinforced Masonry ◽  
Paper Work ◽  
Made In

Shear walls are a structural system which gives solidness or stability to structures from lateral loads like wind, seismic loads. The structural systems are fabricated by reinforced concrete, plywood/timber unreinforced, reinforced masonry at which these systems are subdivided into coupled shear walls, shear wall frames, shear panels and staggered walls. The present paper work was made in the interest of studying and analysis of various research works involved in enhancement of shear walls and their behaviour towards lateral loads. In SAP2000 analysis we found that when we apply lateral force between the stories the amount of compression and tension force between the stories obtained is equal to the manual analysis .In STAAD.PRO, we analyzed the light frame shear wall for seismic analysis. The estimated results for light frame shear wall with one storey, shear wall with two storey and shear wall with three storey shown similar to the results which are obtained by using FEM software like STAAD and SAP2000.

scholarly journals PENGARUH RASIO TINGGI-LEBAR (Hw/Lw) TERHADAP KAPASITAS BEBAN LATERAL, DAN POLA RETAK DINDING GESER BERTULANGAN RINGAN AKIBAT BEBAN SIKLIK

2018 ◽  
Vol 15 (2) ◽  
pp. 108
Author(s):  
Mochammad Surya Budi Utomo
Keyword(s):  
Control Method ◽  
Load Capacity ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Load ◽  
Wall Structure ◽  
Width Ratio ◽  
Structural System ◽  
Structural Element ◽  
Reference Pattern

The shear wall is a vertical structural element of a structural system that serves to withstand lateral loads, whether caused by wind or earthquake. In Indonesia is still often found structural system in old buildings that still use a minimal reinforcement ratio or in this case the lightly shear wall. The lightly sliding wall is believed to have a low lateral load capacity, but in some cases in many countries, the lightweight sliding wall is sufficiently resistant to earthquakes. The height-width ratio is an important aspect in the shear wall structure. Therefore, further research is needed on the effect of high-width ratios. This study discusses the effect of high-width ratios on shear lightly shear walls due to cyclic loads. In this study, the shear wall used as a test specimen with many test specimens was 9 shear wall walls with variations of height-width ratios (2.0, 1.3, and 1.0) or with sizes: (800x400mm), (800x600mm), and (800x800mm) . The test is carried out by providing cyclic load and axial load constant of 3% of axial capacity (Pn) of each specimen until the specimen is collapsed by the drift control method. Data in the form of loads and deviations per cycle are recorded for the analysis of collapse mechanisms. While the picture taken as a reference pattern of cracks. The results of the test show that with increasing height-width ratios can produce the smallest lateral load capacity, or vice versa. The lateral load capacity generated by each test object is SW 2.0 (1), SW 2.0 (2), SW 2.0 (3), SW 1.3 (1), SW 1.3 (2), SW 1.3 (3), SW 1.0 1), SW 1.0 (2), and SW 1.0 (3) are 1593kg, 1503 kg, 1592 kg, 3296 kg, 3388 kg, 3286 kg, 4772 kg, 4771 kg, and 4778 kg. Crack patterns that occur on each specimen have the same result that is the same occurrence of opening (gap opening) at the bottom of the wall.

scholarly journals AN EVALUATION METHOD OF SHEAR STRENGTH FOR RC SHEAR WALLS WITH MULTI-OPENINGS

2012 ◽  
Vol 77 (679) ◽  
pp. 1445-1453 ◽  
Author(s):  
Masato SAKURAI ◽  
Hiroshi KURAMOTO ◽  
Tomoya MATSUI
Keyword(s):  
Shear Strength ◽  
Evaluation Method ◽  
Shear Walls
Sign in / Sign up

Export Citation Format

Share Document