scholarly journals A STUDY OF STORY SHEAR FORCE FACTOR OF THE SMALL STRUCTURE ON THE ELEVATED BRIDGE

2013 ◽  
Vol 19 (43) ◽  
pp. 939-944
Author(s):  
Yusuke OZEKI ◽  
Yasumasa MIWA ◽  
Toshikazu HOTTA ◽  
Shinya HIRUKAWA ◽  
Takanori ISHIDA ◽  
...  
Keyword(s):  
Shear Force ◽  
Force Factor ◽  
Elevated Bridge ◽  
Small Structure

Failure Analysis With the Scanning Electron Microscope

1972 ◽  
Vol 30 ◽  
pp. 482-483
Author(s):  
John R. Devaney
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Integrated Circuits ◽  
Failure Analysis ◽  
High Reliability ◽  
Military Applications ◽  
Small Structure ◽  
Useful Life ◽  
Insight Into ◽  
Scanning Electron

Occasionally in history, an event may occur which has a profound influence on a technology. Such an event occurred when the scanning electron microscope became commercially available to industry in the mid 60's. Semiconductors were being increasingly used in high-reliability space and military applications both because of their small volume but, also, because of their inherent reliability. However, they did fail, both early in life and sometimes in middle or old age. Why they failed and how to prevent failure or prolong “useful life” was a worry which resulted in a blossoming of sophisticated failure analysis laboratories across the country. By 1966, the ability to build small structure integrated circuits was forging well ahead of techniques available to dissect and analyze these same failures. The arrival of the scanning electron microscope gave these analysts a new insight into failure mechanisms.

Transmembrane Calcium Influx Associated with von Willebrand Factor Binding to GP Ib in the Initiation of Shear-Induced Platelet Aggregation

1993 ◽  
Vol 69 (05) ◽  
pp. 496-502 ◽  
Author(s):  
Yasuo Ikeda ◽  
Makoto Handa ◽  
Tetsuji Kamata ◽  
Koichi Kawano ◽  
Yohko Kawai ◽  
...  
Keyword(s):  
Shear Force ◽  
Calcium Influx ◽  
Fold Increase ◽  
Intracellular Camp ◽  
Recombinant Fragment ◽  
Transmembrane Flux ◽  
Irreversible Aggregation ◽  
Von Willebrand ◽  
Willebrand Factor ◽  
Camp Levels

SummaryWe found that the binding of multimeric vWF to GP Ib under a shear force of 108 dynes/cm2 resulted in the transmembrane flux of Ca2+ ions with a two-to three-fold increase in their intracellular concentration ([Ca2+]i). The blockage of this event, obtained by inhibiting the vWF-GP Ib interaction, suppressed aggregation. In contrast, the blockage of vWF binding to GP IIb-IIIa, as well as the prevention of activation caused by increased intracellular cAMP levels, inhibited aggregation but had no significant effect on [Ca2+]i increase. A monomeric recombinant fragment of vWF containing the GP Ib-binding domain of the molecule (residues 445-733) prevented all effects mediated by multimeric vWF but, by itself, failed to support the increase in [Ca2+]i and aggregation. These results suggest that the binding of multimeric vWF to GP Ib initiates platelets aggregation induced by high shear stress by mediating a transmembrane flux of Ca2+ ions, perhaps through a receptor-dependent calcium channel. The increase in [Ca2+]i may act as an intracellular message and cause the activation of GP IIb-IIIa; the latter receptor then binds vWF and mediates irreversible aggregation.

Some Consequences of Coulomb Friction in Modeling Longitudinal Traction

1990 ◽  
Vol 18 (1) ◽  
pp. 13-65 ◽  
Author(s):  
W. W. Klingbeil ◽  
H. W. H. Witt
Keyword(s):  
Shear Force ◽  
Coulomb Friction ◽  
Interfacial Shear ◽  
Force Generation ◽  
Behavior Patterns ◽  
Inflation Pressure ◽  
Friction Law ◽  
The Coefficient Of Friction ◽  
Coulomb Friction Law ◽  
Perfect Adhesion

Abstract A three-component model for a belted radial tire, previously developed by the authors for free rolling without slip, is generalized to include longitudinal forces and deformations associated with driving and braking. Surface tractions at the tire-road interface are governed by a Coulomb friction law in which the coefficient of friction is assumed to be constant. After a brief review of the model, the mechanism of interfacial shear force generation is delineated and explored under traction with perfect adhesion. Addition of the friction law then leads to the inception of slide zones, which propagate through the footprint with increasing severity of maneuvers. Different behavior patterns under driving and braking are emphasized, with comparisons being given of sliding displacements, sliding velocities, and frictional work at the tire-road interface. As a further application of the model, the effect of friction coefficient and of test variables such as load, deflection, and inflation pressure on braking stiffness are computed and compared to analogous predictions on the braking spring rate.

Liquid-Phase Peak Force Infrared Microscopy

2020 ◽  
Author(s):  
Haomin Wang ◽  
Joseph M. González-Fialkowski ◽  
Wenqian Li ◽  
Yan Yu ◽  
Xiaoji Xu
Keyword(s):  
Liquid Phase ◽  
Spatial Resolution ◽  
Shear Force ◽  
Polymer Surface ◽  
Surface Damage ◽  
Peak Force ◽  
Infrared Microscopy ◽  
Contact Mode ◽  
Force Microscopy ◽  
Hydrogen Deuterium

Atomic force microscopy-infrared microscopy (AFM-IR) provides a route to bypass Abbe’s diffraction limit through photothermal detections of infrared absorption. With the combination of total internal reflection, AFM-IR can operate in the aqueous phase. However, AFM-IR in contact mode suffers from surface damage from the lateral shear force between the tip and sample, and can only achieve 20~25-nm spatial resolution. Here, we develop the liquid-phase peak force infrared (LiPFIR) microscopy that avoids the detrimental shear force and delivers an 8-nm spatial resolution. The non-destructiveness of the LiPFIR microscopy enables <i>in situ</i> chemical measurement of heterogeneous materials and investigations on a range of chemical and physical transformations, including polymer surface reorganization, hydrogen-deuterium isotope exchange, and ethanol-induced denaturation of proteins. We also perform LiPFIR imaging of the budding site of yeast cell wall in the fluid as a demonstration of biological applications. LiPFIR unleashes the potential of in liquid AFM-IR for chemical nanoscopy.

The Effect of Ball Pad Metallurgy and Ball Composition on Solder Ball Integrity of Plastic Ball Grid Array Packages

1998 ◽  
Author(s):  
C.H. Zhong ◽  
Sung Yi
Keyword(s):  
Failure Mode ◽  
Barrier Layer ◽  
Shear Force ◽  
Solder Ball ◽  
Ball Grid Array ◽  
Reliability Test ◽  
Shear Forces ◽  
Ball Shear ◽  
Plastic Ball ◽  
Plastic Ball Grid Array

Abstract Ball shear forces of plastic ball grid array (PBGA) packages are found to decrease after reliability test. Packages with different ball pad metallurgy form different intermetallic compounds (IMC) thus ball shear forces and failure modes are different. The characteristic and dynamic process of IMC formed are decided by ball pad metallurgy which includes Ni barrier layer and Au layer thickness. Solder ball composition also affects IMC formation dynamic process. There is basically no difference in ball shear force and failure mode for packages with different under ball pad metallurgy before reliability test. However shear force decreased and failure mode changed after reliability test, especially when packages exposed to high temperature. Major difference in ball shear force and failure mode was found for ball pad metallurgy of Ni barrier layer including Ni-P, pure Ni and Ni-Co. Solder ball composition was found to affect the IMC formation rate.

Sign in / Sign up

Export Citation Format

Share Document