scholarly journals Formulation and in-vitro Evaluation of Carvedilol Gastroretentive Capsule as (Superporous Hydrogel)

2021 ◽  
Vol 30 (2) ◽  
pp. 196-207
Author(s):  
Haider Mohammed Jihad ◽  
Entidhar J. Al- Akkam
Keyword(s):  
Drug Release ◽  
Tween 80 ◽  
Oral Route ◽  
Fickian Diffusion ◽  
Poly Vinyl Alcohol ◽  
Release Mechanism ◽  
Gastric Residence Time ◽  
Gas Blowing ◽  
Superporous Hydrogel

  The preferred route of drug administration is the oral route, but drugs with narrow absorption window in the gastrointestinal tract are still challenging. The ability to extend and monitor the gastric emptying time is a valuable tool for processes remaining in the stomach longer than other traditional dosage forms. The purpose of this study was to formulate and evaluate gastroretentive superporous hydrogel (SPH) of carvedilol with view to improve its solubility and increase gastric residence time in order to get sustained release formulas via utilization of various kinds and concentrations of hydrophilic polymers then after, incorporate the best prepared formula into capsules.  Sixteenth formulae of SPH hybrid were prepared by gas blowing technique from the following materials; monomers (Poly vinyl alcohol, and Acrylamide), cross-linkers (Methylene bisacrylamide, and glutaraldehyde), hybrid agent (Chitosan), foaming agent (NaHCO3) and foam stabilizer (Tween 80). Different amounts or concentrations of these materials were utilized to investigate their effect on SPH properties (density, porosity, floating, drug content, drug release, swelling time, and swelling ratio). The soaking procedure was utilized for loading of carvedilol into SPH hybrid (6.25mg/2.5g SPH).  After analysis the results statistically and application the similarity factor (f2) equation, formula F8 was selected as the best formula and incorporated into capsules.  The drug release data were applied to different mathematical kinetics and the results were shown to be fitted to Higuchi model and the release mechanism was (non fickian) diffusion. The overall results suggested that the proposed SPH hybrid drug delivery system is encouraging for carvedilol specific delivery to the stomach.

scholarly journals Formulation and invitro evaluation of oral extended release microspheres of aceclofenac using various natural polymers

2019 ◽  
Vol 1 (2) ◽  
pp. 58-66
Author(s):  
Syed abid ali ◽  
Syed mujtaba pasha ◽  
Omair sohail ahmed ◽  
Omer wasiq ◽  
Mohammed mukaram ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Oral Route ◽  
Aqueous System ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Natural Polymers ◽  
Drug Release Mechanism ◽  
Microsphere Method

In the present work, bioadhesive microspheres of Aceclofenac using Sodium alginate along with Carbopol 934, Carbopol 971, HPMC K4M as copolymers were formulated to deliver Aceclofenac via oral route. The results of this investigation indicate that ionic cross-linking technique Ionotropic gelation method can be successfully employed to fabricate Aceclofenac microspheres. The technique provides characteristic advantage over conventional microsphere method, which involves an “all-aqueous” system, avoids residual solvents in microspheres. FT-IR spectra of the physical mixture revealed that the drug is compatible with the polymers and copolymers used. Micromeritic studies revealed that the mean particle size of the prepared microspheres was in the size range of 512-903µm and are suitable for bioadhesive microspheres for oral administration. The in-vitro mucoadhesive study demonstrated that microspheres of Aceclofenac using sodium alginate along with Carbopol934 as copolymer adhered to the mucus to a greater extent than the microspheres of Aceclofenac using sodium alginate along with Carbopol 971 and HPMC K4M as copolymers. The invitro drug release decreased with increase in the polymer and copolymer concentration. Analysis of drug release mechanism showed that the drug release from the formulations followed non-Fickian diffusion and the best fit model was found to be Korsmeyer-Peppas. Based on the results of evaluation tests formulation coded T4 was concluded as best formulation.

DESIGN AND CHARACTERIZATION OF ALFUZOSIN HCL GASTRORETENTIVE FLOATING MATRIX TABLETS EMPLOYING HPMC K 100M

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (11) ◽  
pp. 71-73
Author(s):  
Ch. Taraka Ramarao ◽  
◽  
J Vijaya Ratna ◽  
R. B. Srinivasa
Keyword(s):  
Drug Release ◽  
Dosage Forms ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Gastric Residence Time ◽  
Drug Release Mechanism ◽  
The Matrix ◽  
Gastro Retentive

The present investigation involves developing gastro retentive drug delivery systems (GFDDS) of alfuzosin HCl using HPMCK100M a is the matrixing agent and floating enhancer. Sodium bicarbonate in the acidic environment reacts with the acid and produces carbon dioxide. The gastro retentive tablets can be formulated to increase the gastric residence time and thereby increase the oral bioavailability. From the drug release study, it was concluded that the AFTB4 formula of HPMC K 100 M matrix tablets gives the controlled release up to 12 hours by showing increased release with floating lag time 24 seconds. Non – Fickian diffusion was the drug release mechanism from the matrix tablets formulated employing HPMC K 100 M. The matrix tablets (AFTB4) formulated employing 40 % HPMC K 100 M are best suited to be used for gastro retentive dosage form of alfuzosin HCl. Finally, it can be concluded that good candidates for the preparation of gastro retentive dosage forms due its gastric stability, gastric absorption and better bioavailability.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals Fabrication and in vitro characterization of polymeric nanoparticles for Parkinson's therapy: a novel approach

2014 ◽  
Vol 50 (4) ◽  
pp. 869-876 ◽  
Author(s):  
Neha Gulati ◽  
Upendra Nagaich ◽  
Shubhini Saraf
Keyword(s):  
Drug Release ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Mode Of Delivery ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Novel Approach

The objective of the research was to formulate and evaluate selegiline hydrochloride loaded chitosan nanoparticles for the Parkinson's therapy in order to improve its therapeutic effect and reducing dosing frequency. Taguchi method of design of experiments (L9 orthogonal array) was used to get optimized formulation. The selegiline hydrochloride loaded chitosan nanoparticles (SHPs) were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP) and tween 80 as surfactant. The SHPs had a mean size of (303.39 ± 2.01) nm, a zeta potential of +32.50mV, and entrapment efficiency of SHPs was 86.200 ± 1.38%. The in vitro drug release of SHPs was evaluated in phosphate buffer saline (pH 5.5) using goat nasal mucosa and found to be 82.529% ± 1.308 up to 28 h. Release kinetics studies showed that the release of drug from nanoparticles was anomalous (non-fickian) diffusion indicating the drug release is controlled by more than one process i.e. superposition of both phenomenon, the diffusion controlled as well as swelling controlled release. SHPs showed good stability results as found during stability studies at different temperatures as mentioned in ICH guidelines. The results revealed that selegiline hydrochloride loaded chitosan nanoparticles are most suitable mode of delivery of drug for promising therapeutic action.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF ORAL SWELLABLE RAPID RELEASE FILM WITH SUPERDISINTEGRANT-SURFACTANT

2021 ◽  
pp. 75-80
Author(s):  
NEHA IMTIAZ ◽  
SUTAPA BISWAS MAJEE ◽  
GOPA ROY BISWAS
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Diclofenac Sodium ◽  
Hydroxypropyl Methylcellulose ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Disintegration Time ◽  
Rapid Release ◽  
Oral Films

Objective: Oral disintegrating films consisting of hydrophilic polymer are designed to be quickly hydrated by saliva, adhere to the mucosa and disintegrate rapidly to release the drug. The aim of the present study was to prepare stable, flexible swellable rapid release oral films with hydroxypropyl methylcellulose E15 LV (HPMC) and polyvinyl alcohol (PVA) in different ratios. Guar gum was incorporated as the mucoadhesive agent. In order to achieve rapid disintegration of the film cross carmellose sodium (superdisintegrant) and surfactant like Tween 80 were added. The model drug used in the study was diclofenac sodium. Methods: Films were developed using HPMC E15 LV and PVA by solvent casting method and characterized for thickness, swelling index, disintegration time, folding endurance, drug content, and in vitro drug release pattern and kinetics. Results: The prepared swellable rapid release oral films were quite flexible and transparent with a smooth texture. The swelling index study confirmed that the films possessed the desired swelling property. Fastest disintegration was observed with the oral film containing HPMC: PVA in the ratio of 2:1, guar gum at 120 mg, 20% w/w crosscarmellose sodium and 4%w/w Tween 80. The swellable rapid release oral films were found to follow either Higuchi or Korsmeyer-Peppas model with drug release following either Fickian or non-Fickian diffusion. Maximum drug release of around 70% was observed from the above-mentioned film in 1hr in simulated salivary fluid. Conclusion: Therefore, swellable rapid release oral films with HPMC E15 LV: PVA, guar gum, croscarmellose sodium and Tween 80 demonstrated satisfactory swelling, rapid disintegration and improved drug release for oromucosal absorption.

scholarly journals 5-Fluorouracil Release from Chitosan-Based Matrix.Experimental and Theoretical Aspects

2020 ◽  
Vol 57 (3) ◽  
pp. 180-188
Author(s):  
Roxana Iancu ◽  
Stefan Andrei Irimiciuc ◽  
Maricel Agop ◽  
Mihail Frasila ◽  
Maria-Alexandra Paun ◽  
...  
Keyword(s):  
Drug Release ◽  
Polarized Light ◽  
Crosslinking Density ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Morphological Aspects ◽  
Drug Release Mechanism ◽  
The Matrix

A series of four drug release formulations based on 5-fluorouracil encapsulated into a chitosan-based matrix were prepared by in situ hydrogelation with 3,7-dimethyl-2,6-octadienal. The formulations were investigated from structural and morphological aspects by FTIR spectroscopy, polarized light microscopy and scanning electron microscopy. It was established that 5-fluorouracil was anchored into the matrix as crystals, whose dimension varied as a function of the crosslinking density. The in vitro drug release simulated into a media mimicking the physiological environment revealed a progressive release of the 5-fluorouracil, in close interdependence with the crosslinking density. In the context of Pharmacokinetics behavioral analysis, a new mathematical procedure for describing drug release dynamics in polymer-drug complex system is proposed. Assuming that the dynamics of polymer-drug system�s structural units take place on continuous and nondifferentiable curves (multifractal curves), we show that in a one-dimensional hydrodynamic formalism of multifractal variables the drug release mechanism (Fickian diffusion, non-Fickian diffusion, etc) are given through synchronous dynamics at a differentiable and non-differentiable scale resolutions. Finally, the model is confirmed by the empirical data.

scholarly journals Development and evaluation of gastroretentive norfloxacin floating tablets

2009 ◽  
Vol 59 (2) ◽  
pp. 211-221 ◽  
Author(s):  
Ramesh Bomma ◽  
Rongala Swamy Naidu ◽  
Madhusudan Yamsani ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
Floating Tablets

Development and evaluation of gastroretentive norfloxacin floating tabletsFloating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics,viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied forin vitrodrug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based onin vitrocharacteristics and was usedin vivoradiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 ± 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

scholarly journals Pentoxifylline Loaded Floating Microballoons: Design, Development and Characterization

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Prashant Malik ◽  
Upendra Nagaich ◽  
Raj Kaur Malik ◽  
Neha Gulati
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Solvent System ◽  
Fickian Diffusion ◽  
Design Development ◽  
Gastric Residence Time ◽  
Xanthine Derivative ◽  
Loading Efficiency

The floating microballoons have been utilized to obtain prolonged and uniform release in the stomach. The objective of the present study involves design, development, and characterization of pentoxifylline loaded floating microballoons to prolong their gastric residence time. Pentoxifylline (trisubstituted xanthine derivative) loaded microballoons were prepared by the solvent evaporation technique using different concentrations of polymers like HPMC K4M and ethyl cellulose (EC) in ethyl alcohol and dichloromethane organic solvent system. Microballoons were characterized for their particle size, surface morphology, production yield, loading efficiency, buoyancy percentage, and in vitro drug release studies. From the characterization it was observed that increases in amount of polymers (HPMC K4M and EC) led to increased particle size, loading efficiency, and buoyancy percentage, and retarded drug release. The particle size, particle yield, loading efficiency, buoyancy percentage and in vitro drug release for optimized formulation (F3) were found to be 104.0±2.87 µm, 80.89±2.24%, 77.85±0.61%, 77.52±2.04%, and 82.21±1.29%, respectively. The data was fitted to different kinetic models to illustrate its anomalous (non-Fickian) diffusion. The in vitro result showed that formulations comprised of varying concentrations of ethyl cellulose in higher proportion exhibited much retarded drug release as compared to formulations comprised of higher proportion of varying concentrations of HPMC K4M.

Sign in / Sign up

Export Citation Format

Share Document