scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals SMART INNOVATIVE APPROACH FOR DESIGNING FLUVOXAMINE LOADED BIO-NANOSUSPENSION FOR THE MANAGEMENT OF DEPRESSION

2019 ◽  
Vol 11 (1) ◽  
pp. 191 ◽  
Author(s):  
Yogita Tyagi ◽  
N. V. Satheesh Madhav
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Release Kinetics ◽  
Polydispersity Index ◽  
Fickian Diffusion ◽  
Santalum Album ◽  
Improved Stability ◽  
Ophthalmic Delivery

Objective: Design and evaluation of fluvoxamine loaded bio-nanosuspensions using biopolymer which was isolated from the wood of Santalum album used as the stabilizer.Methods: The main aim of the present investigation was to obtain an ocular drug delivery system with improved stability using biopolymer. The fluvoxamine loaded Bio-nanosuspension was prepared using novel biopolymer isolated from Santalum album by sonication solvent evaporation method with different ratios (1%, 2%, 3%, 4% and 5%) and evaluated for particle size, polydispersity index, zeta potential, pH stability studies, %entrapment efficacy, in vitro drug release, stability studies.Results: The prepared bio-nanosuspension was subjected to the best formulation based on the comparison of above-mentioned evaluation parameters, so Fb3 (3%) formulation was found to be the best formulation showing an R2 value of 0.9744, T50% of 31.3 h and T80% of 50.1 h respectively. According to the release kinetics, the best fit model was found to be Peppas Korsmeyer with Fickian Diffusion (Higuchi Matrix) as the mechanism of drug release. Santalum album provided excellent stability for the formulation, and resulting particle size for the best formulation was found to be 196 nm. The bio-nanosuspension had Polydispersity Index (PDI) of 0.19 with zeta potential of-20mV.Conclusion: The prepared bio-nanosuspension was found to be safe and compatible with the ophthalmic delivery for treatment of depression.

scholarly journals DEVELOPMENT, CHARACTERIZATION, AND EVALUATION OF SELEGILINE BIONANOSUSPENSIONS USING BUCHANANIA LANZAN AS BIOSTABILIZER

2019 ◽  
pp. 248-255
Author(s):  
YOGITA TYAGI ◽  
N. V. SATHEESH MADHAV
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Polydispersity Index ◽  
Fickian Diffusion ◽  
Stability Studies ◽  
Best Fit

Objective: Development and evaluation of selegiline-loaded bio-nanosuspensions using biopolymer which was isolated from seeds of Buchanania lanzan (Chironji), used as biostabilizer and compared with standard polymer. Methods: The selegiline-loaded bio-nanosuspensions were prepared using novel biopolymer and standard stabilizer (hydroxypropyl methylcellulose) by sonication solvent evaporation method with different ratios (1%, 2%, 3%, 4%, and 5%) and evaluated for particle size, polydispersity index, zeta potential, pH stability studies, percentage entrapment efficacy, in vitro drug release, and stability studies. Results: The prepared selegiline bio-nanosuspensions were subjected to the best formulation based on comparison of above-mentioned evaluation parameters, so Fb2 (2%) formulation was found to be the best formulation showing an R2=0.9842, T50% of 32 h and T80% of 70 h, respectively. According to the release kinetics, the best fit model was found to be Peppas-Korsmeyer with Fickian diffusion (Higuchi matrix) as the mechanism of drug release, and Fs5 (5%) formulation was found to be the best formulation showing an R2=0.9564, T50% of 25 h and T80% of 60 h, respectively. According to the release kinetics, the best fit model was found to be Peppas-Korsmeyer with Fickian diffusion (Higuchi matrix) as the mechanism of drug release. The biopolymer provided excellent stability for the formulation and resulting particle size for the best formulation was found to be 360 nm. The best formulation was found to be polydispersity index of 0.43 with zeta potential of −5.12 mV. Conclusion: The prepared bio-nanosuspensions using biopolymer were found to be safe and compatible with the novel drug delivery for the treatment of depression in comparison of standard polymer.

Development and Optimization of Sustained Release Moxifloxacin Hydrochloride Loaded Nanoemulsion for Ophthalmic Drug Delivery: A 32 Factorial Design Approach

2020 ◽  
Vol 12 ◽  
Author(s):  
Sagar R. Pardeshi ◽  
Harshal A. Mistari ◽  
Rakhi S. Jain ◽  
Pankaj R. Pardeshi ◽  
Rahul L. Rajput ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Factorial Design ◽  
Water Solubility ◽  
Tween 80 ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Bacterial Conjunctivitis ◽  
Promising Alternative

Background: Moxifloxacin is a BCS class I drug used in the treatment of bacterial conjunctivitis and keratitis. Despite its high water solubility, it possesses limited bioavailability due to anatomical and physiological constraints associated with the eyes which required multiple administrations to achieve a therapeutic effect. Objective: In order to prolong drug release and to improve antibacterial efficacy for the treatment of bacterial keratitis and conjunctivitis, moxifloxacin loaded nanoemulsion was developed. Methods: The concentration of oil (oleic acid), surfactant (tween 80), and cosurfactant (propylene glycol) were optimized by employing a 3-level 2-factorial design of experiment for the development of nanoemulsion. The developed nanoemulsion was characterized by particle size distribution, viscosity, refractive index, pH, drug content and release, transmission electron microscopy (TEM), and antibacterial study. The compatibility of the drug with the excipients was accessed by Fourier transform infrared spectroscopy (FTIR). Result: The average globule size was found to be 198.20 nm. The TEM study reveals the globules were nearly spherical and are well distributed. In vitro drug release profile for nanoemulsion shown sustained drug release (60.12% at the end of 6 h) compared to drug solution, where complete drug released within 2 h. The antibacterial effectiveness of the drug-loaded nanoemulsion was improved against S. aureus compared with the marketed formulation. Conclusion: The formulated sustained release nanoemulsion could be a promising alternative to eye drop with improved patient compliance by minimizing dosing frequency with improved antibacterial activity.

scholarly journals Fabrication and in vitro characterization of polymeric nanoparticles for Parkinson's therapy: a novel approach

2014 ◽  
Vol 50 (4) ◽  
pp. 869-876 ◽  
Author(s):  
Neha Gulati ◽  
Upendra Nagaich ◽  
Shubhini Saraf
Keyword(s):  
Drug Release ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Mode Of Delivery ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Novel Approach

The objective of the research was to formulate and evaluate selegiline hydrochloride loaded chitosan nanoparticles for the Parkinson's therapy in order to improve its therapeutic effect and reducing dosing frequency. Taguchi method of design of experiments (L9 orthogonal array) was used to get optimized formulation. The selegiline hydrochloride loaded chitosan nanoparticles (SHPs) were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP) and tween 80 as surfactant. The SHPs had a mean size of (303.39 ± 2.01) nm, a zeta potential of +32.50mV, and entrapment efficiency of SHPs was 86.200 ± 1.38%. The in vitro drug release of SHPs was evaluated in phosphate buffer saline (pH 5.5) using goat nasal mucosa and found to be 82.529% ± 1.308 up to 28 h. Release kinetics studies showed that the release of drug from nanoparticles was anomalous (non-fickian) diffusion indicating the drug release is controlled by more than one process i.e. superposition of both phenomenon, the diffusion controlled as well as swelling controlled release. SHPs showed good stability results as found during stability studies at different temperatures as mentioned in ICH guidelines. The results revealed that selegiline hydrochloride loaded chitosan nanoparticles are most suitable mode of delivery of drug for promising therapeutic action.

scholarly journals FABRICATION AND IN VITRO CHARACTERIZATION OF A NOVEL NANOSUSPENSION OF TELMISARTAN: A POORLY SOLUBLE DRUG PREPARED BY ANTISOLVENT PRECIPITATION TECHNIQUE USING 33 FACTORIAL DESIGN

2020 ◽  
pp. 286-294
Author(s):  
PRASANTA KUMAR MOHAPATRA ◽  
SIREESHA ◽  
VAIBHAV RATHORE ◽  
HARISH CHANDRA VERMA ◽  
BIBHUTI PRASAD RATH ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Dissolution Rate ◽  
Release Kinetics ◽  
Precipitation Method ◽  
Lauryl Sulfate ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Objective: The motivation behind the current examination was to build the solvency and dissolution rate of an antihypertensive drug telmisartan by the planning of nanosuspension by precipitation method at the research facility scale. We researched the nanoparticle manufacture of telmisartan employing a 33 factorial experimental configuration considering the impacts of nanosuspension on the physical, morphological, and dissolution properties of telmisartan. Methods: To get ready, nanosuspension particles of an ineffectively dissolvable drug are moreover of a drug solution to the anti-solvent leads to abrupt supersaturation and precipitation the making of nanoparticles. The nanosuspension particles of a poorly soluble drug loaded with urea and surfactants (sodium lauryl sulfate (SLS), poloxamer 188, Tween 80) have been prepared by a precipitation method. The nanosuspension particles were characterized for particle size, zeta potential, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), in vitro drug release, and release kinetics. Results: The readily optimized batch nanosuspension particles evaluated and exhibited the particle size (750 nm), zeta potential (-24.33 mV), differential scanning calorimetry (DSC) drug exhibited a change in crystalline form to amorphous, in vitro dissolution (F12 was higher 95% within 5 min) and drug release kinetics. The formulation parameter of surfactant concentration is optimized. Conclusion: The formulation of the nanosuspension approach has been shown to substantial improvement in the dissolution rate, thereby enhancing the oral bioavailability with the future development of this technology.

scholarly journals FLUCONAZOLE NANOGEL: FABRICATION AND IN VITRO EVALUATION FOR TOPICAL APPLICATION

2021 ◽  
pp. 272-277
Author(s):  
DIVYA ◽  
INDERBIR SINGH ◽  
UPENDRA NAGAICH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Seborrheic Dermatitis ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Flow Index ◽  
In Vitro Evaluation

Objective: The aim of this study is to develop and in vitro evaluation of prepared fluconazole nanogel for seborrheic dermatitis Methods: Fluconazole nanogel was formulated to act against seborrheic dermatitis. The fluconazole nanoparticles were prepared by a simplified evaporation method and evaluated for particle size, entrapment efficiency, and percent in vitro drug release. The nanogel was also characterized based on parameters like particle size, percent entrapment efficiency, shape surface morphology, rheological properties, in vitro release R² = 0.9046, and release kinetics. Results: The nanoparticle with a combination of Eudragit RS and Tween 80 showed the best result with particle size in the range of 119.0 nm to 149.5 nm, with a cumulative percent drug release of 95 % up to 18 h. The formulated nanogel with optimum concentration of HPMC authenticate with particle size 149.50±0.5 with maximum drug release (92.13±0.32) %. Conclusion: Different percentages of polymers (ethyl-cellulose, eudragit, and tween 80) are used as variable components in the formulation of nanogel. The optimized batch showed good physical properties (flow index, spreadability, and viscosity) along with rapid drug release. Therefore, it can be concluded that nanogel containing fluconazole has potential application in topical delivery.

scholarly journals Formulation and Characterization of Felodipine as an Oral Nanoemulsions

2021 ◽  
Vol 30 (1) ◽  
pp. 209-217
Author(s):  
Sumaya B. Hamed ◽  
Shaimaa N. Abd Alhammid
Keyword(s):  
Particle Size ◽  
Oleic Acid ◽  
Zeta Potential ◽  
Water Solubility ◽  
Tween 80 ◽  
Aqueous Solubility ◽  
Compatibility Study ◽  
Drug Content ◽  
Drug Molecules

            Felodipine is a calcium-channel blocker with low aqueous solubility and bioavailability. Lipid dosage forms are attractive delivery systems for such hydrophobic drug molecules. Nanoemulsion (NE) is one of the popular methods that has been used to solve the dispersibility problems of many drugs. Felodipine was formulated as a NE utilizing oleic acid as an oil phase, tween 80 and tween 60 as surfactants and ethanol as a co-surfactant. Eight formulas were prepared, and different tests were performed to ensure the stability of the NEs, such as particle size, polydispersity index, zeta potential, dilution test, drug content, viscosity and in-vitro drug release. Results of characterization showed that felodipine nanoemulsion (F3) with (oleic acid 10%) ,(Smix 60% of tween80 :ethanol in a ratio of 3:1), (DDW 30%) was selected as the best formula, since it has a particle size of (17.01)nm, low PDI (0.392), zeta potential (-22.34mV), good dilution without drug precipitation , higher percent of drug content (99.098%) with  acceptable viscosity , and complete release of the drug after (45 min.) with significantly higher (P<0.05)   dissolution  rate in comparison with the pure drug powder. The selected formula (F3) subjected to further investigations as drug and excipient compatibility study by Fourier transform infrared spectroscopy (FTIR) The outcomes of the (FTIR) explain that the distinctive peaks for felodipine were not affected by other components and displayed the same functional group's band with very slight shifting. This indicates that there was no interaction between felodipine and other NE components. Therefore, these excipients were found to be compatible with felodipine. In conclusion, the NE was found to be an efficient method to enhance the dispersibility and permeatioins of drugs that have poor water solubility (lipophilic drugs).

Hydrodynamically Balanced Capsule of Famotidine: An Improved Delivery via Gastroretentive Hydrogels

2021 ◽  
pp. 4573-4579
Author(s):  
Ritesh Kumar ◽  
Kashmira J. Gohil
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Release Kinetics ◽  
Mixing Time ◽  
Fickian Diffusion ◽  
Absolute Bioavailability ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release

Objective: The aim of the present study was to increase the absolute bioavailability of famotidine, enhanced patient compliance in the treatment of peptic ulcer by increasing its gastric residence time and controlled local release of drug upto 12 hours. Materials and Methods: Hydrodynamically balanced capsules of famotidine were prepared, consisting of floating matrix granules, which formed hydrogels. Effects of different formulation variables namely hypromellose (HPMC 4000 cps, HPMC 5600 cps, HPMC 15000 cps), effervescent agent (potassium bicarbonate) and mixing time were studied. Optimization study included 23 full factorial design with t50% and t80% as the kinetic parameters (response variable). Matrix characterization included scanning electron microscopy. All prepared formulations were evaluated to various parameters such as micromeritics properties, % buoyancy and in vitro drug release studies. Results and Discussion: The optimized formulation (F4) remains buoyant for more than 12 hrs. The in-vitro drug release study indicated that increasing the viscosity of HPMC resulted in sustained drug release with long floating duration. SEM studies showed definite entrapment of the drug in the matrix and hydrogel formation. Results showed a pH independent but polymer viscosity dependent drug release profile. The release kinetics followed Higuchi model and mechanism of release was found to be non-Fickian diffusion. Conclusion: Famotidine-loaded hydrodynamically balanced capsules were successfully prepared and prove to be useful for prolonged gastric residence of the drug, better bioavailability, patient compliance and improve delivery for enhanced anti-ulcer activity.

Design and Synthesis of a Novel Gabapentin-Phosphotidylcholine Conjugate for Targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier

2020 ◽  
Vol 16 ◽  
Author(s):  
Anjali P.B ◽  
Jawahar N. ◽  
Jubie S. ◽  
Neetu Yadav ◽  
Selvaraj A. ◽  
...  
Keyword(s):  
Drug Release ◽  
Phospholipase A2 ◽  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Structural Analog ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
Nanostructured Lipid Carrier ◽  
Discovery Studio

Background: : Epilepsy is a genuine neurological turmoil that effects around 50 million individuals around the world. Practically 30% of epileptic patients experience the ill effects of pharmaco-obstruction, which is related with social seclusion, subordinate conduct, low marriage rates, joblessness, mental issues and diminished personal satisfaction. At present accessible antiepileptic drugs have a restricted viability, and their negative properties limit their utilization and cause challenges in patient administration. Gabapentin 1-(aminomethyl)cyclohexane acetic acid, Gbp , (trade name Neurontin), a structural analog of γ-aminobutyric acid (GABA), BCS class 3 drug with having permeability issues. Objective: This work was an attempt to formulate and characterize a new approach to treat epilepsy by targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier. Methods: Docking studied carried out using Accelrys Discovery studio 4.1 Client and gabapentin and phosphotidylcholine were conjugated through chemical conjugation. Nanostructured lipid carrier (NLC) was prepared using hot homogenization technique. Results: The libdock score of Gabapentin- Phosphotidylcholine conjugate (192.535) were found to be more than Gabapentin (77.1084) and Phosphotidylcholine (150.212). For the optimized formulation the particle size (50.08), zeta potential (-1.48), PDI (0.472) and entrapment efficiency (77.8) was observed. The NLC was studies for in-vitro drug release studies and release kinetics. Finally found that the drug release from the NLC followed Higuchi release kinetic and the mode of drug release from the NLC was found to be Non- Fickian diffusion. Conclusion: The formulated Nanostructured lipid carrier of Gabapentin-Phosphotidylcholine conjugate may be able to use to prevent seizure.

scholarly journals FORMULATION AND CHARACTERIZATION OF PAPAIN LOADED SOLID LIPID NANOPARTICLES AGAINST HUMAN COLORECTAL ADENOCARCINOMA CELL LINE

2018 ◽  
Vol 11 (10) ◽  
pp. 393
Author(s):  
Suriyakala Perumal Chandran ◽  
Kannikaparameswari Nachimuthu
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Cell Viability ◽  
Cell Line ◽  
Solid Lipid Nanoparticles ◽  
Colorectal Adenocarcinoma ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: Colorectal cancer is one of the most commonly diagnosed cancer and also most common gastrointestinal malignancy with high prevalence rate in the younger population. Usually, cancer cells are surrounded by a fibrin coat which is resistant to fibrinolytic degradation. This fibrin coat is act as self-protective against natural killing mechanism. The main objective was to prepare papain-loaded solid lipid nanoparticles (P-SLN) by melt dispersion-ultrasonication method and investigated the cytotoxic efficacy against colorectal adenocarcinoma (human colorectal adenocarcinoma [HCT 15]) cells.Methods: Optimized polymer ratio was characterized by differential scanning calorimetry, Fourier-transform infrared, X-ray diffraction, scanning electron microscopy, entrapment efficiency, particle size and zeta potential analysis, in vitro drug release, and in vitro cytotoxicity studies on HCT-15 colorectal adenocarcinoma cells.Results: The results showed that the particle size, morphological character and zeta potential value of optimized batch P-SLN were 265 nm, spherical and −26.5 Mv, respectively. The in vitro drug profile of P-SLN exhibited that it produced sustain drug release, and the cell viability of HCT-15 against P-SLN shown better efficacy than pure papain enzyme.Conclusion: P-SLNs were successfully prepared and investigated the in vitro drug release and in vitro cell viability against HCT-15 cell line.

Sign in / Sign up

Export Citation Format

Share Document