ELECTROLESS NICKEL

Alloy Digest ◽  
1986 ◽  
Vol 35 (4) ◽  
Keyword(s):  
Nickel Coating ◽  
Chemical Reduction ◽  
Electroless Nickel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Sodium Hypophosphite ◽  
Work Piece ◽  
Nickel Ions ◽  
Continuous Contact ◽  
Chemical Corporation

Abstract ELECTROLESS NICKEL is a nickel coating deposited by chemical reduction of nickel ions. The most widely used reducing agent is sodium hypophosphite. The thickness of the deposited coating is uniform over all areas of the work-piece that are in continuous contact with fresh plating solution. The process is applicable to a wide variety of metal and nonmetal substrates. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as heat treating and joining. Filing Code: Ni-332. Producer or source: Occidental Chemical Corporation.

ENPLATE NI-423

Alloy Digest ◽  
1986 ◽  
Vol 35 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
Chemical Reduction ◽  
Electronic Devices ◽  
Electroless Nickel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Phosphorus Alloy

Abstract ENPLATE NI-423 is a nickel-phosphorus alloy deposited by chemical reduction without electric current. It is deposited by a stable, relatively high-speed functional electroless nickel process that produces a low-stress coating with good ductility and excellent resistance to corrosion. Its many uses include equipment for chemicals and food, aerospace components, molds and electronic devices. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-343. Producer or source: Enthone Inc..

ENPLATE ELECTROLESS NICKEL

Alloy Digest ◽  
1986 ◽  
Vol 35 (10) ◽  
Keyword(s):  
Chemical Reduction ◽  
Electroless Nickel ◽  
Heat Treating ◽  
Uniform Thickness ◽  
Entire Surface ◽  
Corrosion Resistant ◽  
Nickel Coatings ◽  
High Nickel ◽  
Low Phosphorus ◽  
Phosphorus Alloy

Abstract ENPLATE ELECTROLESS NICKEL is a high-nickel, low-phosphorus alloy deposited by chemical reduction without electric current. Such alloys are more corrosion resistant than electroplated nickel coatings. Furthermore, unlike electrolytic nickel, electroless nickel-phosphorus alloy deposits are essentially pore free and are of uniform thickness over the entire surface, even of complex and irregular shaped objects. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-340. Producer or source: Enthone Inc..

SCRATCH ADHESION EVALUATION OF ELECTROLESS NICKEL PLATING ON Mg AND Mg ALLOYS

2006 ◽  
Vol 20 (25n27) ◽  
pp. 4637-4642 ◽  
Author(s):  
ZHENMIN LIU ◽  
WEI GAO
Keyword(s):  
Nickel Coating ◽  
Weight Ratio ◽  
High Strength ◽  
Electroless Nickel ◽  
Corrosion And Wear ◽  
Mg Alloys ◽  
Electroless Nickel Plating ◽  
Structural Components ◽  
Adhesion Properties ◽  
Electroless Ni

Magnesium ( Mg ) and its alloys are being used as structural components in industry because of their high strength-to-weight ratio and relatively high stiffness. A shortcoming of Mg based alloys is their poor corrosion and wear resistance. Therefore, coatings or surface treatment are needed for protection purpose. This paper reports our work on electroless plating of Ni - P on Mg alloys. Pure Mg , AZ31 and AZ91 Mg alloys were used as the substrates to investigate friction and adhesion properties of the electroless Ni - P coatings. The maximum friction coefficient (~0.3) was found on the electroless nickel coating of pure Mg substrate. The adhesion strengths of the coatings on AZ31 and AZ91 Mg alloys are higher than that on pure Mg . The critical load (a measure of adhesion strength) of AZ31 reached 13.1 N .

AMPCOLOY 405

Alloy Digest ◽  
1962 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Wear Resistant

Abstract Ampcoloy 405 is a high strength, ductile, corrosion and wear resistant copper alloy available in extruded solid bar form for gears, valve seats, marine hardware, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-116. Producer or source: Ampco Metal Inc..

TRIBALOY 400

Alloy Digest ◽  
1975 ◽  
Vol 24 (7) ◽  
Keyword(s):  
Alloy Powder ◽  
Base Alloy ◽  
Intermetallic Phase ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Corrosive Media ◽  
Alloy Matrix ◽  
Cobalt Base Alloy ◽  
Plasma Sprayed ◽  
Cobalt Base

Abstract TRIBALOY 400 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder/Metallurgy) processing. Uses include anti-wear surfaces and bearings or seals operating in corrosive media. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-72. Producer or source: Tribaloy Products.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

METGLAS ALLOY 2826

Alloy Digest ◽  
1976 ◽  
Vol 25 (11) ◽  
Keyword(s):  
Magnetic Properties ◽  
Metallic Glass ◽  
Liquid State ◽  
Single Phase ◽  
Heat Treating ◽  
High Permeability ◽  
Metallic Material ◽  
Nickel Iron ◽  
Rapid Quench ◽  
Chemical Corporation

Abstract METGLAS Alloy 2826 (Fe40Ni40P14B6) is a ferromagnetic, high permeability, nickel-iron metallic glass which, when appropriately annealed, yields a material similar to the higher nickel containing permalloys in magnetic properties. Alloy 2826 is a single phase, opaque metallic material with a glass-like structure obtained by a very rapid quench from the liquid state. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: Ni-235. Producer or source: Allied Chemical Corporation.

DURCOMET 100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Annealed Condition ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Very High

Abstract Durcomet 100 is an improved version of Alloy CD-4 MCu with better corrosion and wear resistance. The alloy is used in the annealed condition and possesses excellent corrosion resistance over a wide range of corrosion environments. Mechanical strength is also very high. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-540. Producer or source: Duriron Company Inc.

CRUCIBLE CPM S30V

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Better Than

Abstract Crucible CPM S30V is a martensitic stainless steel designed with a combination of toughness, wear resistance, and corrosion resistance equal to or better than 440C. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: SS-891. Producer or source: Crucible Service Centers.

CARPENTER CTS-204P ALLOY (MICRO MELT 20-4)

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Volume Fraction ◽  
Cold Work ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Corrosion Resistant ◽  
Die Steel ◽  
Powder Metallurgy Process ◽  
Wear And Corrosion ◽  
Metallurgy Process

Abstract Carpenter CTS-204P (Micro Melt 20-4) alloy is a highly wear- and corrosion-resistant, air-hardening martensitic cold-work stainless die steel produced using Carpenter’s Micro-Melt powder metallurgy process. The excellent wear resistance of the alloy is provided by a significant volume fraction of hard vanadium-rich carbides, while the outstanding corrosion resistance of the alloy is obtained as a result of the chromium-rich matrix. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: SS-1051. Producer or source: Carpenter Specialty Alloys.

Sign in / Sign up

Export Citation Format

Share Document