CARPENTER STAINLESS TYPE 305

Alloy Digest ◽  
1982 ◽  
Vol 31 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stainless Steels ◽  
Nickel Content ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Cold Forming ◽  
High Nickel ◽  
The Common

Abstract CARPENTER STAINLESS TYPE 305 has higher nickel content than the austenitic stainless steels considered to be in the 18% chromium-8% nickel category. Its high nickel content lowers the rate of strain hardening and, therefore, allows severe cold forming operations without the necessity of intermediate process anneals in comparison to the common 18-8 austenitic grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-401. Producer or source: Carpenter.

UNILOY 303, 303Se

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
General Purpose

Abstract UNILOY 303 and 303Se are improved machinability grades of 18-8 general purpose austenitic stainless steels. Machinability is respectively improved by additions of sulfur or selenium. Whereas standard 18-8 stainless steel had a machinability rating about 40-50% that of AISI B1112 free-machining carbon steel, these steels have a rating of about 70% that of AISI B1112. UNILOY 303Se is preferred over UNILOY 303 where machined finish and good cold formability and corrosion resistance are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-512. Producer or source: Cytemp Cyclops.

ALLEGHENY LUDLUM AL 2205 ALLOY

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
The Family

Abstract ALLEGHENY LUDLUM AL 2205 ALLOY is in the family of duplex alloys in which added nitrogen significantly improves corrosion resistance, especially in the welded condition. The microstructure consists of a balanced mixture of austenitic and ferritic phases. Its corrosion resistance to many environments is superior to Types 316 or 317 and it has a yield strength more than double that of AISI conventional austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-462. Producer or source: Allegheny Ludlum Corporation.

CARPENTER STAINLESS TYPE 309/309S

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Type 304

Abstract Carpenter Stainless Types 309 and 309S are austenitic stainless steels with superior oxidation resistance and high temperature strength compared to Type 304, the basic grade in this series. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-804. Producer or source: Carpenter.

MAGNIFER 8105, 8105 So

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Magnetic Alloys ◽  
Soft Magnetic Alloys ◽  
Recording Heads ◽  
High Nickel

Abstract Magnifer 8105 and 8105 So are soft magnetic alloys with a high nickel content. Typical applications for 8105 are recording heads, while 8105 So has additional applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-575. Producer or source: Krupp VDM GmbH.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

JOSLYN STAINLESS TYPE 305H

Alloy Digest ◽  
1966 ◽  
Vol 15 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Work Hardening ◽  
Heat Treating ◽  
Nickel Steel ◽  
Temperature Performance ◽  
Hardening Factor

Abstract Joslyn Stainless Type-305H is a modified austenitic chromium-nickel steel recommended for severe cold heading applications because of its low work-hardening factor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-178. Producer or source: Joslyn Stainless Steels.

AWHF STEEL

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Cold Forming ◽  
Temperature Performance ◽  
Minimum Yield

Abstract AWHF STEEL is a high-formability steel produced regularly at minimum yield strengths of 45,000 and 50,000 psi and for special applications at 55,000 and 60,000 psi. It is recommended for difficult cold-forming applications that involve bending or drawing and it has good weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-275. Producer or source: Alan Wood Steel Company.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 303

Alloy Digest ◽  
1997 ◽  
Vol 46 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Life ◽  
Stainless Steels ◽  
Heat Treating ◽  
Machining Time ◽  
Type Machine

Abstract Project 70 stainless type 303 and Project 7000 stainless type 303 are free-machining stainless steels of the austenitic chromium-nickel type. They offer significantly improved machinability and longer tool life. These steels are suited particularly for automatic bar-machine and Swiss-type machine operations where longer tool life results in more productive machining time. Applications include shafts, valve bodies, valves, valve trim, and fittings. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-409. Producer or source: Carpenter. Originally published June 1982, revised June 1997.

ALLOY 0Cr25Ni6Mo3CuN

Alloy Digest ◽  
1998 ◽  
Vol 47 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Temperature Performance ◽  
Steel Research ◽  
Oil Refinement

Abstract ALLOY 0Cr25Ni6Mo3CuN is one of four grades of duplex stainless steel that were developed and have found wide applications in China since 1980. In oil refinement and the petrochemical processing industries, they have substituted for austenitic stainless steels in many types of equipment, valves, and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-706. Producer or source: Central Iron & Steel Research Institute.

Sign in / Sign up

Export Citation Format

Share Document