CRONIFER 1925 HMo

Alloy Digest ◽  
1982 ◽  
Vol 31 (3) ◽  
Keyword(s):  
Flue Gas ◽  
Salt Water ◽  
Nickel Content ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
High Nickel ◽  
Plant Equipment ◽  
Resistance To Stress ◽  
The Common ◽  
Strength And Ductility

Abstract CRONIFER 1925 HMo is an austenitic chromium-nickel-molybdenum stainless steel. The high contents of chromium and especially molybdenum make this steel highly resistant to pitting and crevice corrosion. Because of its high nickel content, its resistance to stress-corrosion cracking is considerably higher than that of the common austenitic stainless steels. CRONIFER 1925 HMo has good strength and ductility, high impact values and good weldability. Its applications include heat exchangers for use with salt water, bleaching-plant equipment and flue-gas scrubbers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-403. Producer or source: Vereingte Deutsche Metallwerke AG.

CARPENTER STAINLESS TYPE 305

Alloy Digest ◽  
1982 ◽  
Vol 31 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stainless Steels ◽  
Nickel Content ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Cold Forming ◽  
High Nickel ◽  
The Common

Abstract CARPENTER STAINLESS TYPE 305 has higher nickel content than the austenitic stainless steels considered to be in the 18% chromium-8% nickel category. Its high nickel content lowers the rate of strain hardening and, therefore, allows severe cold forming operations without the necessity of intermediate process anneals in comparison to the common 18-8 austenitic grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-401. Producer or source: Carpenter.

INCO ALLOY 020

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Nickel Content ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Iron ◽  
Inco Alloy ◽  
High Nickel ◽  
Resistance To Stress ◽  
Iron Chromium Alloy ◽  
Iron Chromium

Abstract INCO alloy 020 is an austenitic nickel-iron-chromium alloy. Its relatively high nickel content provides resistance to stress-corrosion cracking. Molybdenum gives the alloy good resistance to pitting and crevice corrosion; chromium makes it resistant to oxidation and niobium confers resistance to intergranular attack. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-498. Producer or source: Inco Alloys International Inc..

MAGNIFER 8105, 8105 So

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Magnetic Alloys ◽  
Soft Magnetic Alloys ◽  
Recording Heads ◽  
High Nickel

Abstract Magnifer 8105 and 8105 So are soft magnetic alloys with a high nickel content. Typical applications for 8105 are recording heads, while 8105 So has additional applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-575. Producer or source: Krupp VDM GmbH.

ALUMINUM 513.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Thermal Treatment ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Food Handling ◽  
Mold Casting ◽  
Plant Equipment ◽  
Strength And Ductility

Abstract ALUMINUM 513.0 is an aluminum-magnesium-zinc permanent-mold casting alloy. It cannot be hardened nor strengthened by any thermal treatment and is characterized by moderate strength and ductility. It is recommended for such applications as chemical-plant equipment, food handling and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-265. Producer or source: Various aluminum companies.

COPPER ALLOY No. C70400

Alloy Digest ◽  
1985 ◽  
Vol 34 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Velocity ◽  
Heat Exchangers ◽  
Copper Alloy ◽  
Cold Working ◽  
Elevated Temperatures ◽  
Salt Water ◽  
Heat Treating ◽  
Nickel Copper ◽  
Resistance To Stress

Abstract Copper Alloy No. C70400 is a 5.5% nickel-copper alloy characterized by resistance to corrosion by high-velocity seawater, resistance to stress-corrosion cracking, and retention of strength at moderately elevated temperatures. It responds well to both hot and cold-working operations. Among its many uses are springs, switches, heat exchangers, salt-water piping and relays. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-500. Producer or source: Copper and copper alloy mills.

NAS 354N

Alloy Digest ◽  
2010 ◽  
Vol 59 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Crevice Corrosion ◽  
Nickel Content ◽  
Heat Treating ◽  
Good Resistance ◽  
Resistance To Stress ◽  
Super Austenitic Stainless Steel ◽  
Very High

Abstract NAS 354N is a super austenitic stainless steel with very high molybdenum for pitting and crevice corrosion resistance and high enough nickel content for good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1066. Producer or source: Nippon Yakin Kogyo Company Ltd.

ACI TYPE CN-7M

Alloy Digest ◽  
1981 ◽  
Vol 30 (10) ◽  
Keyword(s):  
Mechanical Property ◽  
Fracture Toughness ◽  
Copper Alloys ◽  
Nickel Content ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Property Data ◽  
High Nickel ◽  
Iron Nickel

Abstract Type CN-7M covers a group of related complex iron-nickel-chromium-molybdenum-copper alloys that contain more nickel than chromium. The high nickel content together with molybdenum and copper give these alloys especially good resistance to sulfuric acid and many reducing chemicals. Among the alloys included in Type CN-7M, the so-called 20 alloy is produced in greatest quantity. The physical and mechanical property data herein are for the 20 alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-393. Producer or source: Various stainless steel casting companies.

SANDVIK SAF 2304

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK SAF 2304 is a duplex (ferritic-austenitic) stainless steel of extra-low carbon content. Its yield strength is about double that of austenitic stainless steels and it has very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-483. Producer or source: Sandvik.

ACI TYPE HK

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Nickel Content ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance ◽  
Reducing Conditions ◽  
Structural Applications ◽  
High Nickel ◽  
Iron Chromium

Abstract Type HK is an iron-chromium nickel alloy containing enough chromium to ensure good resistance to corrosion by hot gases, including sulfur-bearing gases, in both oxidizing or reducing conditions. Its high nickel content helps to make it one of the strongest heat-resistant casting alloy at temperatures above 1900 F. Accordingly, it is used for castings in stressed parts in structural applications up to 2100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-303. Producer or source: Stainless steel foundries.

ATI 310S

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Room Temperature ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Resistance To Oxidation ◽  
The Common ◽  
Type 304 ◽  
Room Temperature Strength

Abstract ATI 310S is a 25Cr-20Ni austenitic stainless steel that is typically used for elevated temperature applications. Owing to its higher chromium and nickel contents the alloy provides comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than the common austenitic stainless steels such as Type 304. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1328. Producer or source: ATI.

Sign in / Sign up

Export Citation Format

Share Document