CARTECH AERMET-FOR-TOOLING

Alloy Digest ◽  
2021 ◽  
Vol 70 (5) ◽  
Keyword(s):  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Cobalt Nickel ◽  
Alloy Tool ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Very High

Abstract CarTech AerMet-for-Tooling is a low-carbon, cobalt-nickel-chromium-molybdenum, alloy tool steel that exhibits high strength and high hardness together with exceptional ductility and toughness. This alloy is designed for components that require a hardness of about 53–55 HRC along with very high toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-813. Producer or source: Carpenter Technology Corporation.

CARTECH L6

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Cold Work ◽  
Nickel Content ◽  
High Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Short Run ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Cold Work Tool Steel

Abstract CarTech L6 is an oil-hardening, high-carbon (0.70%), nickel-chromium, alloy cold-work tool steel. It is suitable for short run tooling in applications where a combination of high hardness and good toughness is required. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-800. Producer or source: Carpenter Technology Corporation.

PYROMET 901

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Gas Turbines ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Super Alloy

Abstract PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

PYROTOOL EX

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base

Abstract PYROTOOL EX is an austenitic precipitation-hardenable nickel-base alloy with high strength in the range 1000 to 1500 F. When aged it produces a hardness of Rockwell C 40-44. Applications include high-temperature tooling, extrusion dies and dummy blocks. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-170. Producer or source: Carpenter Technology Corporation.

PYROTOOL W

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROTOOL W has been designed to possess high strength and hardness at temperatures up to 1500 F (816 C). Applications include high-temperature tooling, extrusion dies, dummy blocks, rings, holders, forging dies and mandrels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-161. Producer or source: Carpenter Technology Corporation.

PYROMET 600

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nuclear Industry ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base

Abstract Pyromet 600 is a corrosion-resisting nickel-base alloy, having a very desirable combination of high strength and workability, both hot and cold. It has high strength and resistance to oxidation at high temperatures. It is designed to meet the highest quality of the nuclear industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-149. Producer or source: Carpenter Technology Corporation.

PYROMET 88

Alloy Digest ◽  
1989 ◽  
Vol 38 (8) ◽  
Keyword(s):  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Annealed Condition ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base ◽  
Corrosion And Oxidation ◽  
Effect Of Age

Abstract PYROMET alloy 88 is an age hardenable nickel-base alloy with high strength good corrosion and oxidation resistance. It possesses low creep rate in the temperature range 1200-1500 F (650-820 C). Above 1500 F (820 C), the effect of age hardening is lost and the alloy is used in the annealed condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-185. Producer or source: Carpenter Technology Corporation. Originally published February 1973, revised August 1989.

CARTECH Ti-3Al-8V-6Cr-4Mo-4Zr (BETA C)

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Minimum Weight ◽  
High Strength ◽  
Heat Treating ◽  
Beta Alloy ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Metastable Beta ◽  
Good Workability

Abstract CarTech Ti-3Al-8V-6Cr-4Mo-4Zr, also known as Ti-3-8-6-4-4 and Beta C, is a metastable beta alloy used in the solution heat treated or solution heat treated and aged condition. It is appropriate for applications where very high strength, minimum weight, and corrosion resistance are important. Ti-3Al-8V-6Cr-4Mo-4Zr has gained in popularity among beta alloys because it is easier to melt and process, exhibiting low segregation, good workability, and good heat-treating properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-172. Producer or source: Carpenter Technology Corporation.

CARPENTER CUSTOM 475

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Small Diameter ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Peak Aged ◽  
Carpenter Technology Corporation

Abstract Custom 475 stainless is a premium melted, high-strength, martensitic, precipitation-hardenable stainless steel. It provides good corrosion resistance and was designed to achieve a tensile strength up to 2000 MPa (290 ksi), combined with good toughness and ductility when in the H975 condition, peak aged at 525 deg C (975 deg F). Other combinations of strength are possible by applying aging temperatures up to 595 deg C (1100 deg F). The alloy is available in strip, wire, and small diameter bar. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-974. Producer or source: Carpenter Technology Corporation.

CARPENTER ALLOY 925

Alloy Digest ◽  
2007 ◽  
Vol 56 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Technology Corporation ◽  
Resistance To Stress ◽  
Carpenter Technology Corporation

Abstract Carpenter Alloy 925 is an age-hardenable Ni-Fe-Cr alloy designed to resist corrosion while providing high strength. A combination of copper, titanium, molybdenum, and aluminum, in conjunction with nickel, provides excellent resistance to stress-corrosion cracking, pitting and crevice corrosion, and oxidizing and reducing environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-652. Producer or source: Carpenter Technology Corporation.

CARPENTER CP TITANIUM GRADE 4

Alloy Digest ◽  
2002 ◽  
Vol 51 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nickel Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Fatigue Properties ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Titanium Grade ◽  
Carpenter Technology Corporation

Abstract Carpenter CP Titanium Grade 4 is the highest-strength grade of the unalloyed grades 1-4. It competes with steels and nickel alloys with its combination of corrosion resistance, fatigue properties, and high strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-128. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document