CARTECH L6

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Cold Work ◽  
Nickel Content ◽  
High Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Short Run ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Cold Work Tool Steel

Abstract CarTech L6 is an oil-hardening, high-carbon (0.70%), nickel-chromium, alloy cold-work tool steel. It is suitable for short run tooling in applications where a combination of high hardness and good toughness is required. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-800. Producer or source: Carpenter Technology Corporation.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2067

Alloy Digest ◽  
2020 ◽  
Vol 69 (2) ◽  
Keyword(s):  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Dimensional Changes ◽  
Short Run ◽  
Quench Hardening ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2067 is a high-carbon, 1.5% chromium, alloy cold-work tool steel. In view of its higher hardenability than that of the non-alloy, water-hardening, cold work tool steels, this steel can be oil quenched, a factor that minimizes dimensional changes during quench hardening. Cryodur 2067 is suitable for short run tooling in applications requiring high surface hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-786. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

CARTECH A6

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Cold Work ◽  
Heat Treating ◽  
Minimum Size ◽  
Tool Steels ◽  
Size Change ◽  
Change Characteristics ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Cold Work Tool Steel ◽  
Temperature Heat Treatment

Abstract CarTech A6, also known as CarTech Vega, is an air-hardening, high-carbon (0.70%), Mn-Cr-Mo, alloy cold-work tool steel. It combines the deep-hardening and minimum size change characteristics of air-hardening tool steels with the simplicity of low-temperature heat treatment possible in many oil-hardening tool steels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-803. Producer or source: Carpenter Technology Corporation.

CARTECH AERMET-FOR-TOOLING

Alloy Digest ◽  
2021 ◽  
Vol 70 (5) ◽  
Keyword(s):  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Cobalt Nickel ◽  
Alloy Tool ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Very High

Abstract CarTech AerMet-for-Tooling is a low-carbon, cobalt-nickel-chromium-molybdenum, alloy tool steel that exhibits high strength and high hardness together with exceptional ductility and toughness. This alloy is designed for components that require a hardness of about 53–55 HRC along with very high toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-813. Producer or source: Carpenter Technology Corporation.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2235

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cutting Edge ◽  
High Carbon ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2235 is a high-carbon, Cr-V, alloy cold-work tool steel that has medium hardenability and is suitable for short-run tooling requiring a combination of good wear resistance and toughness, and a keen cutting edge. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-811. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

ALLEGHENY LUDLUM AL600 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Nickel Content ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Resistance To Oxidation

Abstract Allegheny Ludlum AL600 alloy is a nickel-chromium alloy designed for use from cryogenic up to 2000 F(1093 C) temperatures. Its nickel content provides resistance to reducing environments and stress-corrosion cracking. Its chromium affords resistance to mildly oxidizing conditions. It has excellent resistance to oxidation to about 2000 F(1093 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-370. Producer or source: Allegheny Ludlum Corporation.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2210

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Carbon ◽  
High Toughness ◽  
Temperature Performance ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Deutsche Edelstahlwerke Cryodur 2210, also known as silver steel, is a high-carbon, Cr-V, alloy cold-work tool steel that is primarily used for short-run tooling requiring low-to-medium wear resistance and very high toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-806. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

CARTECH 617

Alloy Digest ◽  
2021 ◽  
Vol 70 (11) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Technology Corporation ◽  
Oxidation Resistant ◽  
Carpenter Technology Corporation ◽  
Corrosion And Oxidation

Abstract CarTech 617 (Pyromet 617) is a corrosion and oxidation-resistant, high-temperature nickel-chromium-cobalt-molybdenum alloy. It is solid-solution strengthened with cobalt and molybdenum. Oxidation resistance is imparted through the addition of chromium and aluminum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-777. Producer or source: Carpenter Technology Corporation.

CALITE N

Alloy Digest ◽  
1953 ◽  
Vol 2 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Chromium Alloy ◽  
High Ductility ◽  
Temperature Changes ◽  
Nickel Chromium ◽  
High Nickel ◽  
Uneven Heating

Abstract CALITE N is a high nickel-chromium alloy for general heat enduring applications under the most severe temperature conditions. It is immune to oxidation up to maximum metal temperatures of 2100 F. Its high ductility imparted by high nickel content makes Calite N valuable where uneven heating or rapid irregular temperature changes are unavoidable. Highly resistant to carburization. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-7. Producer or source: Calorizing Company.

CARPENTER 440-XH

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Chromium Stainless Steel

Abstract Carpenter 440-XH is an air-hardening corrosion-resistant chromium stainless steel with the high hardness of a D2 tool steel. Applications include cutlery and various dies for forming, drawing, and extruding. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-750. Producer or source: Carpenter Technology Corporation. Originally published July 1999, corrected May 2002.

CARTECH 201 MODIFIED

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Working ◽  
Nickel Content ◽  
Heat Treating ◽  
General Corrosion ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Lower Nickel

Abstract CarTech 201 Modified is a nitrogen-strengthened, chromium-manganese-nickel, austenitic stainless steel that provides substantially higher yield and tensile strength than CarTech 304, and has general-corrosion resistance between that of CarTech 430 and CarTech 304. Compared with CarTech 201 (UNS S20100), CarTech 201 Modified has a lower nickel content, which results in higher-strength levels after cold working. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1319. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document