scholarly journals PERFORMANCE ANALYSIS ON DYNAMIC WIRELESS CHARGING FOR ELECTRIC VEHICLE USING FERRITE CORE

2022 ◽  
Vol 23 (1) ◽  
pp. 46-59
Author(s):  
Siti Hajar Yusoff ◽  
Amira Aziera Abdullah ◽  
Nadia Nazieha Nanda ◽  
Ahmed Samir Abed Badawi
Keyword(s):  
Electric Vehicle ◽  
Power Efficiency ◽  
Design Guidelines ◽  
Wireless Charging ◽  
Power Transfer ◽  
Wireless Power ◽  
Ferrite Core ◽  
Output Analysis ◽  
Charging System ◽  
Efficient Coupling

The technology of dynamic Wireless Power Transfer (WPT) has been accepted in the Electric Vehicle (EV) industry. Recently, for a stationary EV charging system, the existence of a ferrite core improves power efficiency. However, for dynamic wireless charging, the output power fluctuates when the EV moves. Two main obstacles that must be dealt with is air-gaps and misalignment between the coils. This paper investigates clear design guidelines for fabrication of an efficient Resonant Inductive Power Transfer (RIPT) system for the EV battery charging application using a ferrite core. Two different geometry shapes of ferrite core, U and I cores, will be investigated and tested using simulation and experimental work. The proposed design was simulated in JMAG 14.0, and the prototype was tested in the laboratory. The expected output analysis from these two techniques was that the power efficiency of the ferrite pair should first be calculated. From the analysis and experimental results, it is seen that the pair of ferrite cores that used a U shape at the primary and secondary side provides the most efficient coupling in larger air-gap RIPT application with 94.69% on simulation JMAG 14.0 and 89.7% from conducting an experiment. ABSTRAK: Teknologi Alih Kuasa Wayarles (WPT) dinamik telah diterima pakai dalam Kenderaan Elektrik (EV). Baru-baru ini, kewujudan teras ferit dalam sistem pengecasan pegun EV dapat meningkatkan kecekapan kuasa. Namun, kuasa pengecasan ini akan berubah apabila EV bergerak bagi sistem pengecasan wayarles secara dinamik. Dua halangan utama yang harus ditangani adalah ketidakjajaran dan jarak antara dua gegelung. Kajian ini merupakan garis panduan yang jelas mengenai rekaan fabrikasi dan kecekapan sistem Alih Kuasa Induktif Resonan (RIPT) bagi aplikasi pengecasan bateri EV menggunakan teras ferit. Dua bentuk geometri teras ferit, iaitu teras U dan I telah dikaji dan diuji menggunakan simulasi dan eksperimen. Rekaan ini telah disimulasi menggunakan JMAG 14.0 dan prototaip diuji di dalam makmal. Kedua-dua teknik ini diharapkan dapat menghasilkan kecekapan kuasa yang sama. Dapatan kajian menunjukkan kedua-dua teras ferit pada sisi primer dan sekunder berbentuk U mempunyai gandingan paling efisien bagi jarak paling besar antara 2 gegelung menggunakan aplikasi RIPT dengan 94.69% simulasi JMAG 14.0 dan 89.7% secara eksperimen.

scholarly journals Design of a wireless power transfer system for assisted living applications

2019 ◽  
Vol 6 (1) ◽  
pp. 41-56 ◽  
Author(s):  
Qassim S. Abdullahi ◽  
Rahil Joshi ◽  
Symon K. Podilchak ◽  
Sadeque R. Khan ◽  
Meixuan Chen ◽  
...  
Keyword(s):  
Assisted Living ◽  
Performance Indicator ◽  
The Elderly ◽  
Consumer Electronics ◽  
Electronic Systems ◽  
Wireless Charging ◽  
Power Transfer ◽  
Electronic Textiles ◽  
Wireless Power ◽  
Charging System

Advances in material science and semiconductor technology have enabled a variety of inventions to be implemented in electronic systems and devices used in the medical, telecommunications, and consumer electronics sectors. In this paper, a wireless charging system is described as a wearable body heater that uses a chair as a transmitter (Tx). This system incorporates the widely accepted Qi wireless charging standard. Alignment conditions of a linear three-element coil arrangement and a 3 × 3 coil matrix array are investigated using voltage induced in a coil as a performance indicator. The efficiency obtained is demonstrated to be up to 80% for a voltage of over 6.5 Volts and a power transfer of over 5 Watts. Our results and proposed approach can be useful for many applications. This is because the wireless charging system described herein can help design seating areas for the elderly and disabled, commercial systems, consumer electronics, medical devices, electronic textiles (e-textiles), and other electronic systems and devices.

scholarly journals Efficient wireless charging system for supercapacitor-based electric vehicle using inductive coupling power transfer technique

2019 ◽  
Vol 11 (11) ◽  
pp. 168781401988696
Author(s):  
Ahsan Elahi ◽  
Arslan Ahmed Amin ◽  
Umar Tabraiz Shami ◽  
Muhammad Tayyab Usman ◽  
Muhammad Sajid Iqbal
Keyword(s):  
Electric Vehicle ◽  
Inductive Coupling ◽  
Wireless Charging ◽  
Power Transfer ◽  
Charging System ◽  
Energy Demands ◽  
Experimental Implementation ◽  
Power Transfer Efficiency ◽  
The Cost ◽  
Mathematical Relationships

Wireless charging has become an emerging challenge to reduce the cost of a conventional plug-in charging system in electric vehicles especially for supercapacitors that are utilized for quick charging and low-energy demands. In this article, the design of an efficient wireless power transfer system has been presented using resonant inductive coupling technique for supercapacitor-based electric vehicle. Mathematical analysis, simulation, and experimental implementation of the proposed charging system have been carried out. Simulations of various parts of the systems are carried out in two different software, ANSYS MAXWELL and MATLAB. ANSYS MAXWELL has been used to calculate the various parameters for the transmitter and receiver coils such as self-inductance ( L), mutual inductance ( M), coupling coefficient ( K), and magnetic flux magnitude ( B). MATLAB has been utilized to calculate output power and efficiency of the proposed system using the mathematical relationships of these parameters. The experimental setup is made with supercapacitor banks, electric vehicle, wattmeters, controller, and frequency generator to verify the simulation results. The results show that the proposed technique has better power transfer efficiency of more than 75% and higher power transfer density using a smaller coil size with a bigger gap of 4–24 cm.

scholarly journals Effect of Coil Structure on the Efficiency of Wireless Power Transfer System

2019 ◽  
Vol 9 (2) ◽  
pp. 3387-3392
Keyword(s):  
Wireless Power Transfer ◽  
Receiver Coil ◽  
Transfer System ◽  
Wireless Charging ◽  
Power Transfer ◽  
Wireless Power ◽  
Charging System ◽  
Coil Structure ◽  
Power Transfer Efficiency ◽  
Wireless Power Transfer System

A typical magnetic resonance based wireless power transfer (WPT) system comprises a transmitter coil and an embedded receiver coil used for wireless charging of the electrical and electronics devices. It has been investigated that the coil structure influence the power transfer efficiency of the wireless charging system .The investigations have been carried out in order to determine a suitable coil type and geometry so as to achieve higher efficiency of a wireless power transfer system. The present investigation will afford the design strategy for an efficient wireless charging system .

Using Sensing Coils to Detect and Correct Lateral Misalignments in an Inductive Power-Transfer Wireless Charging System

2017 ◽  
Author(s):  
Ivan Cortes ◽  
Won-jong Kim
Keyword(s):  
Consumer Products ◽  
Wireless Charging ◽  
Power Transfer ◽  
Wireless Power ◽  
Inductive Power Transfer ◽  
Charging System ◽  
Field Symmetry ◽  
Electrical Transformers ◽  
Efficient Power ◽  
Inductive Power

Inductive power transfer (IPT) remains one of the most common ways to achieve wireless power transfer (WPT), operating on the same electromagnetic principle as electrical transformers but with an air core. IPT has recently been implemented in wireless charging of consumer products such as smartphones and electric vehicles. However, one major challenge with using IPT remains ensuring precise alignment between the transmitting and receiving coils so that maximum power transfer can take place. In this paper, the use of additional sensing coils to detect and correct lateral misalignments in an IPT systems is modeled and tested. The sensing coils exploit magnetic-field symmetry to give a nonlinear measure of misalignment direction and magnitude. Experiments using such sensing coils give a misalignment-sensing resolution of less than 1 mm when applied to a common smartphone wireless charging system. Voltage readings from the sensing coils are used for feedback control of an experimental two-dimensional coil positioner. This system is able to reduce lateral misalignments to less than 2 mm in real time, allowing for efficient power transfer. The results of this experiment give confidence that similar sensing coils can be used to reduce lateral misalignments in scaled IPT systems, such as electric-vehicle wireless chargers.

scholarly journals Modeling, Analysis, and Implementation of Series-Series Compensated Inductive Coupled Power Transfer (ICPT) System for an Electric Vehicle

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Moustapha Elwalaty ◽  
Mohamed Jemli ◽  
Hechmi Ben Azza
Keyword(s):  
Electric Vehicle ◽  
Mathematical Expression ◽  
Electrical Circuit ◽  
Air Gap ◽  
Battery Life ◽  
Receiver Coil ◽  
Wireless Charging ◽  
Power Transfer ◽  
Charging System ◽  
Transmitter Coil

This paper focuses on the modeling and implementation of an Electric Vehicle (EV) wireless charging system based on inductively coupled power transfer (ICPT) technique where electrical energy can be wirelessly transferred from source to vehicle battery. In fact, the wireless power transfer (WPT) system can solve the fundamental problems of the electric vehicle, which are the short battery life of the EV due to limited battery storage and the user safety by handling high voltage cables. In addition, this paper gives an equivalent electrical circuit of the DC-DC converter for WPT and comprises some basic components, which include the H-bridge inverter, inductive coupling transformer, filter, and rectifier. The input impedance of ICPT with series-series compensation circuit, their phases, and the power factor are calculated and plotted by using Matlab scripts programming for different air gap values between the transmitter coil and receiver coil. The simulation results indicate that it is important to operate the system in the resonance state to transfer the maximum real power from the source to the load. A mathematical expression of optimal equivalent load resistance, corresponding to a maximal transmission efficiency of a wireless charging system, was demonstrated in detail. Finally, a prototype of a wireless charging system has been constructed for using two rectangular coils. The resonant frequency of the designed system with a 500 × 200 mm transmitter coil and a 200 × 100 mm receiver coil is 10 kHz. By carefully adjusting the circuit parameters, the implementation prototype have been successfully transferred a 100 W load power through 10 cm air gap between the coils.

Solar Powered Electric Vehicle Through Wireless Power Transfer

2021 ◽  
pp. 219-242
Author(s):  
Balamurugan M. ◽  
Raghu N. ◽  
Kamala N. ◽  
Trupti V. Nandikolmath ◽  
Sarat Kumar Sahoo
Keyword(s):  
Electric Vehicle ◽  
Wireless Power Transfer ◽  
Maintenance Cost ◽  
Time Range ◽  
Small Scale ◽  
Wireless Charging ◽  
Power Transfer ◽  
Wireless Power ◽  
Electric Vehicle Charging ◽  
Solar Powered

Solar powered wireless electric vehicle charging technology functions independently without interface with the utility grid. Wireless power transfer (WPT) technology is incorporated for wireless charging, which brings the benefits of safe operation, less pollution, and little maintenance cost. WPT technology necessitates no physical connection between the charging device and vehicle, thus hazards and inconvenience produced by conventional charging methods have been minimized. WPT in electric vehicle can be used to reduce the charging time, range, and cost. In this chapter, the various configurations of WPT like inductive, capacitive, resonant, and roadway power transfer techniques have been presented. The small-scale prototype of wireless charging has been developed in the laboratory by incorporating inductive power transfer technique. The experimental results have been presented to validate the feasibility of the system in real time.

scholarly journals On the Asymptotic Behavior and Parameter Estimation of a Double-Sided LCC-Compensated Wireless Power Transfer System

Machines ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 287
Author(s):  
Feng-Rung Hu ◽  
Jia-Sheng Hu
Keyword(s):  
Parameter Estimation ◽  
Wireless Power Transfer ◽  
Circuit Model ◽  
Current Status ◽  
Transfer System ◽  
Wireless Charging ◽  
Power Transfer ◽  
Wireless Power ◽  
Charging System ◽  
Wireless Power Transfer System

This study investigates the statistic behavior and parameter estimation problems of a double-sided, LCC-compensated, wireless power transfer system. Based on the commonly used wireless charging circuit model, this study proposes a five-step parameter estimation method, which is applicable to automotive static wireless charging systems. The eight parameters in the circuit model of this study are the most important key components of the wireless charging system. The study also found that, under certain conditions, the statistic mode of wireless charging systems has a specific distribution. However, the current status of these eight components for wireless charging of electric vehicles will have complex parameter drift problems. These drift problems will deteriorate the performance of the vehicle power systems. This study probes these factors and proposes some related mathematical theories. The noted factors can be applied to the analysis of the wireless charging system and provide alternative solutions to explain the deteriorations from coil misalignments. Both simulations and experiments are given to show the evaluated issues of the proposed study.

Sign in / Sign up

Export Citation Format

Share Document