scholarly journals Characterization of Titanium Metal Matrix Composites (Ti-MMC) Made Using Different Manufacturing Routes

2021 ◽  
Author(s):  
Luigi Sanguigno ◽  
Marcello Antonio Lepore ◽  
Angelo Rosario Maligno
Keyword(s):  
Composite Laminates ◽  
Metal Matrix ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Morphological Properties ◽  
Elastic Behaviour ◽  
Matrix Composites ◽  
Micromechanical Modelling ◽  
The Matrix

The mechanical and morphological properties of the unidirectional metal matrix composite (MMC) in titanium alloy reinforced with continuous silicon carbide (SiC) fibres are investigated. The lay-up manufacturing process known as the Foil / Fibre (FF) lay-up was compared with the matrix-coated-fibre (CF) method which promises a better final shape of the reinforcing fibre net. Tensile tests were performed to measure mechanical performance of the manufactured MMCs both longitudinally and transversely respect to the direction of SiC fibres. Elastic behaviour of the investigated MMCs was assumed orthotropic and related to mechanical properties and spatial distribution of the MMC constituents: SiC fibres and Titanium (Ti) matrix. This was achieved using micromechanical modelling based on Finite Element (FE) calculations. FE micromechanical modelling was carried out on the Representative Elementary Volume (REV) of the MMC microstructure resolved by non-destructive analysis such as X-Ray tomography. The analysis carried out highlighted and justified mechanical performance difference between composite laminates containing the same amount of SiC reinforcement fibres for unit of volume but made following different manufacturing routes. To compute overall orthotropic behaviour of the MMC laminate, each constituent was assumed as an elastic isotropic heterogeneity during the averaging. This simplify assumption was validated by comparison with experimental data during the mechanical characterization of the investigated MMC composites.

Role of matrix microstructure in the ultrasonic characterization of fiber-reinforced metal matrix composites

1997 ◽  
Vol 12 (3) ◽  
pp. 754-763 ◽  
Author(s):  
S. Krishnamurthy ◽  
T. E. Matikas ◽  
P. Karpur
Keyword(s):  
Titanium Alloy ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Matrix Microstructure ◽  
Sic Fiber ◽  
The Matrix ◽  
Ultrasonic Images

This work deals with the application of ultrasonic nondestructive evaluation for characterizing fiber-reinforced metal matrix composites. The method involved the use of a recently developed technique in which the fiber reinforcement acts as a reflector to incident ultrasonic shear waves. Single fiber and multifiber, single ply composites consisting of SiC fibers in several titanium alloy matrices were investigated. The ultrasonic images obtained were correlated with the results of metallographic characterization of the composites. The results showed that the ultrasonic response of the metal matrix composites is significantly influenced by the microstructure of the matrix through which the incident wave traverses. The general effects of matrix on ultrasonic wave propagation are reviewed, and the ultrasonic signals obtained from various SiC fiber-reinforced titanium alloy composites are discussed in terms of the scattering effects of matrix microstructure.

scholarly journals Manufacture and characterization of aa6061 aluminum alloy metal matrix composites with ceramic particulate reinforcement

2021 ◽  
pp. 46875-46883
Keyword(s):  
Metal Matrix ◽  
High Energy ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particulate Reinforcement ◽  
Aluminum Metal Matrix Composite ◽  
The Matrix ◽  
Alloy Metal

The work’s main objective was the manufacture of an AA6061 aluminum metal matrix composite reinforced with ceramics reinforcements of: aluminum oxide, silicon carbide, aluminum nitride and silicon nitride, through the powder metallurgy technique. The powders were subjected to high energy milling in a SPEX type vibrating mill. Thereafter, a cold uniaxial compactation was made and then the compacts were hot extruded. The powders were subjected to characterization using X-ray diffraction and laser diffraction granulometry. The extruded were characterized by scanning electron microscopy, energy dispersive spectroscopy and had their microhardness evaluated. The characteri-zation showed: the reinforcements’ addition in the matrix contributed to an acceleration of powders’ grinding; the reinforced samples had a higher microhardness than the unreinforced; it was observed that greater milling times and reinforcement’s addition increased the composites’ microhardness.

scholarly journals Synthesis and mechanical characterization of Si3N4 reinforced copper-tin matrix composites

2021 ◽  
Vol 30 (1) ◽  
pp. 199-206
Author(s):  
Anjan Kumar B. Hanumantharayappa ◽  
Chaithra Prasanna ◽  
Chethana C. Ragavendra ◽  
Chandrasekhar Singh Beekam ◽  
Latha Shankar Boluvar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Hardness Test ◽  
Stir Casting ◽  
Matrix Composites ◽  
X Ray ◽  
Casting Technique ◽  
The Matrix ◽  
Reinforcing Material ◽  
Sem Morphology

Abstract The present research reports improvement in mechanical performance of Copper-Tin(Cu-Sn) composites due to the addition of hard Si3N4 particles as reinforcement. Two-step stir casting technique was adopted to prepare Si3N4-reinforced Cu-Sn based composites. The uniform distribution of the reinforcement in the matrix was ensured by SEM morphology and energy-dispersive X-ray (EDAX) spectrum of the developed composites. Brinell hardness test and tension test were used to estimate the hardness and tensile strength of the composite. Si3N4 reinforcing materials added to the extent of 7.5% by wt. to Cu-Sn matrix enhanced hardness by 41% and UTS by 33%, YS by 29% and showed 23% decrement in ductility. Thus a comparison of Si3N4-reinforced Cu-Sn based composites with base metal has shown that considerable improvement in tensile properties such as UTS and YS and hardness if reinforcing material is added to the extent of 7.5%.

scholarly journals Characterization of the Structure, Mechanical Properties and Erosive Resistance of the Laser Cladded Inconel 625-Based Coatings Reinforced by TiC Particles

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2225
Author(s):  
Aleksandra Kotarska ◽  
Tomasz Poloczek ◽  
Damian Janicki
Keyword(s):  
Laser Cladding ◽  
Inconel 625 ◽  
Matrix Composites ◽  
Erosion Rates ◽  
Laser Cladding Process ◽  
Composition Variation ◽  
The Matrix ◽  
Reinforcing Material ◽  
Inconel 625 Superalloy

The article presents research in the field of laser cladding of metal-matrix composite (MMC) coatings. Nickel-based superalloys show attractive properties including high tensile strength, fatigue resistance, high-temperature corrosion resistance and toughness, which makes them widely used in the industry. Due to the insufficient wear resistance of nickel-based superalloys, many scientists are investigating the possibility of producing nickel-based superalloys matrix composites. For this study, the powder mixtures of Inconel 625 superalloy with 10, 20 and 40 vol.% of TiC particles were used to produce MMC coatings by laser cladding. The titanium carbides were chosen as reinforcing material due to high thermal stability and hardness. The multi-run coatings were tested using penetrant testing, macroscopic and microscopic observations, microhardness measurements and solid particle erosive test according to ASTM G76-04 standard. The TiC particles partially dissolved in the structure during the laser cladding process, which resulted in titanium and carbon enrichment of the matrix and the occurrence of precipitates formation in the structure. The process parameters and coatings chemical composition variation had an influence on coatings average hardness and erosion rates.

scholarly journals Predictive Computational Model for Damage Behavior of Metal-Matrix Composites Emphasizing the Effect of Particle Size and Volume Fraction

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2143
Author(s):  
Shaimaa I. Gad ◽  
Mohamed A. Attia ◽  
Mohamed A. Hassan ◽  
Ahmed G. El-Shafei
Keyword(s):  
Finite Element ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Volume Fraction ◽  
Particulate Composites ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Zone Method ◽  
Stress Strain ◽  
The Matrix

In this paper, an integrated numerical model is proposed to investigate the effects of particulate size and volume fraction on the deformation, damage, and failure behaviors of particulate-reinforced metal matrix composites (PRMMCs). In the framework of a random microstructure-based finite element modelling, the plastic deformation and ductile cracking of the matrix are, respectively, modelled using Johnson–Cook constitutive relation and Johnson–Cook ductile fracture model. The matrix-particle interface decohesion is simulated by employing the surface-based-cohesive zone method, while the particulate fracture is manipulated by the elastic–brittle cracking model, in which the damage evolution criterion depends on the fracture energy cracking criterion. A 2D nonlinear finite element model was developed using ABAQUS/Explicit commercial program for modelling and analyzing damage mechanisms of silicon carbide reinforced aluminum matrix composites. The predicted results have shown a good agreement with the experimental data in the forms of true stress–strain curves and failure shape. Unlike the existing models, the influence of the volume fraction and size of SiC particles on the deformation, damage mechanism, failure consequences, and stress–strain curve of A359/SiC particulate composites is investigated accounting for the different possible modes of failure simultaneously.

Synthesis and characterization of ZrO2 and graphene particle reinforced Al6061 metal matrix composites

2021 ◽  
Author(s):  
Satish Babu Boppana ◽  
T. Aravinda ◽  
Samuel Dayanand ◽  
Vinod Reddy ◽  
M. Vijay Kumar ◽  
...  
Keyword(s):  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Synthesis And Characterization ◽  
Matrix Composites

scholarly journals Experimental Research on Bond Behaviour of Fabric Reinforced Cementitious Matrix Composites for Retrofitting Masonry Walls

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Fayu Wang ◽  
Nicholas Kyriakides ◽  
Christis Chrysostomou ◽  
Eleftherios Eleftheriou ◽  
Renos Votsis ◽  
...  
Keyword(s):  
Large Scale ◽  
Tensile Tests ◽  
Seismic Resistance ◽  
Matrix Composites ◽  
Bond Behaviour ◽  
Cementitious Matrix ◽  
The Matrix ◽  
Rc Frame Buildings ◽  
Direct Tensile ◽  
Fabric Reinforced Cementitious Matrix

AbstractFabric reinforced cementitious matrix (FRCM) composites, also known as textile reinforced mortars (TRM), an inorganic matrix constituting fibre fabrics and cement-based mortar, are becoming a widely used composite material in Europe for upgrading the seismic resistance of existing reinforced concrete (RC) frame buildings. One way of providing seismic resistance upgrading is through the application of the proposed FRCM system on existing masonry infill walls to increase their stiffness and integrity. To examine the effectiveness of this application, the bond characteristics achieved between (a) the matrix and the masonry substrate and (b) the fabric and the matrix need to be determined. A series of experiments including 23 material performance tests, 15 direct tensile tests of dry fabric and composites, and 30 shear bond tests between the matrix and brick masonry, were carried out to investigate the fabric-to-matrix and matrix-to-substrate bond behaviour. In addition, different arrangements of extruded polystyrene (XPS) plates were applied to the FRCM to test the shear bond capacity of this insulation system when used on a large-scale wall.

scholarly journals Interfacial Aspects of Metal Matrix Composites Prepared from Liquid Metals and Aqueous Solutions: A Review

Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1400
Author(s):  
Peter Baumli
Keyword(s):  
Aqueous Solutions ◽  
Physical Properties ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Liquid Metals ◽  
Interfacial Phenomena ◽  
Matrix Composites ◽  
Good Adhesion ◽  
Mechanical And Physical Properties ◽  
The Matrix

The paper reviews the preparation of the different metallic nanocomposites. In the preparation of composites, especially in the case of nanocomposites, interfacial phenomena play an important role. This review summarizes the literature on various interfacial phenomena, such as wettability and reactivity in the case of casting techniques and colloidal behavior in the case of electrochemical and electroless methods. The main contribution of this work lies in the evaluation of collected interfacial phenomena and difficulties in the production of metal matrix composites, for both nano-sized and micro-sized reinforcements. This study can guide the composite maker in choosing the best criteria for producing metal matrix composites, which means a real interface with good adhesion between the matrix and the reinforcement. This criterion results in desirable mechanical and physical properties and homogenous dispersion of the reinforcement in the matrix.

Sign in / Sign up

Export Citation Format

Share Document