Framework for rare event detection using Artificial Neural Network based context free grammar

2020 ◽  
Vol 39 (6) ◽  
pp. 8463-8475
Author(s):  
Palanivel Srinivasan ◽  
Manivannan Doraipandian
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Event Detection ◽  
Performance Metrics ◽  
Rare Events ◽  
Rare Event ◽  
Video Stream ◽  
Context Free Grammar ◽  
Artificial Neural ◽  
Context Free

Rare event detections are performed using spatial domain and frequency domain-based procedures. Omnipresent surveillance camera footages are increasing exponentially due course the time. Monitoring all the events manually is an insignificant and more time-consuming process. Therefore, an automated rare event detection contrivance is required to make this process manageable. In this work, a Context-Free Grammar (CFG) is developed for detecting rare events from a video stream and Artificial Neural Network (ANN) is used to train CFG. A set of dedicated algorithms are used to perform frame split process, edge detection, background subtraction and convert the processed data into CFG. The developed CFG is converted into nodes and edges to form a graph. The graph is given to the input layer of an ANN to classify normal and rare event classes. Graph derived from CFG using input video stream is used to train ANN Further the performance of developed Artificial Neural Network Based Context-Free Grammar – Rare Event Detection (ACFG-RED) is compared with other existing techniques and performance metrics such as accuracy, precision, sensitivity, recall, average processing time and average processing power are used for performance estimation and analyzed. Better performance metrics values have been observed for the ANN-CFG model compared with other techniques. The developed model will provide a better solution in detecting rare events using video streams.

A Non - Intrusive Load Identification Algorithm Combined with Event Detection

2021 ◽  
Vol 14 ◽  
Author(s):  
Runhai Jiao ◽  
Qihang Zhou ◽  
Liangqiu Lyu ◽  
Guangwei Yan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Event Detection ◽  
The State ◽  
Event Recognition ◽  
Identification Algorithm ◽  
Load Identification ◽  
Fusion Model ◽  
Public Data ◽  
Artificial Neural

Background: The traditional state-based non-intrusive load monitoring method mainly deploys the aggregate load as the characteristic to identify the states of every electrical appliance. Each identification is relatively independent, and there is no correlation between the identification results. Objective: This paper combines the event detection results with the state-based non-intrusive load identification algorithm to improve accuracy. Methods: Firstly, the load recognition model based on an artificial neural network is constructed, and the state-based recognition results are obtained. An event recognition and detection model is then built to identify electrical state transitions, that is, the current moment based on the event recognition results obtained from the previous moment. Finally, a reasonable decision method is constructed to determine the identification result of the electrical states. Result: Experimental results on the public data set REDD show that in the Long Short-Term Memory (LSTM) fusion model, the macro-F1 is increased by an average of 6%, and the macro-F1 of the Artificial Neural Network (ANN) fusion model is increased by an average of 5.3% compared with LSTM and ANN. Conclusion: The proposed model can effectively improve the accuracy of identification compared with the state-based load identification method.

scholarly journals Application of Gene Expression Programming, Artificial Neural Network and Multilinear Regression in Predicting Hydrochar Physicochemical Properties

2020 ◽  
Author(s):  
Jibril Abdulsalam ◽  
Abiodun Ismail Lawal ◽  
Ramadimetja Lizah Setsepu ◽  
Moshood Onifade ◽  
Samson Bada
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Artificial Neural Network ◽  
Performance Metrics ◽  
Gene Expression Programming ◽  
Mean Bias Error ◽  
Energy Yield ◽  
Multilinear Regression ◽  
Soft Computing Techniques ◽  
Artificial Neural

Abstract Globally, the provision of energy is becoming an absolute necessity. Biomass resources are abundant and have been described as a potential alternative source of energy. However, it is important to assess the fuel characteristics of the various available biomass sources. Soft computing techniques are presented in this study to predict the mass yield (MY), energy yield (EY), and higher heating value (HHV) of hydrothermally carbonized biomass by using Gene Expression Programming (GEP), multiple-input single output-artificial neural network (MISO-ANN), and Multilinear regression (MLR). The three techniques were compared using statistical performance metrics. The coefficient of determination (R2), mean absolute error (MAE), and mean bias error (MBE) were used to evaluate the performance of the models. The MISO-ANN with 5-10-10-1 and 5-15-15-1 network architectures provided the most satisfactory performance of the three proposed models (R2 = 0.976, 0.955, 0.996; MAE = 2.24, 2.11, 0.93; MBE = 0.16, 0.37, 0.12) for MY, EY and HHV respectively. The GEP technique’s ability to predict hydrochar properties based on the input parameters was found to be satisfactory, while MLR provided an unsatisfactory predictive model. Sensitivity analysis was conducted, and the analysis revealed that volatile matter (VM) and temperature (Temp) have more influence on the MY, EY, and HHV.

scholarly journals Walking gait event detection based on electromyography signals using artificial neural network

2019 ◽  
Vol 47 ◽  
pp. 334-343 ◽  
Author(s):  
Nurhazimah Nazmi ◽  
Mohd Azizi Abdul Rahman ◽  
Shin-Ichiroh Yamamoto ◽  
Siti Anom Ahmad
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Event Detection ◽  
Walking Gait ◽  
Artificial Neural ◽  
Electromyography Signals

scholarly journals Enhanced Artificial Neural Network with Harris Hawks Optimization for Predicting Scour Depth Downstream of Ski-Jump Spillway

2020 ◽  
Vol 10 (15) ◽  
pp. 5160
Author(s):  
Saad Sh. Sammen ◽  
Mohammad Ali Ghorbani ◽  
Anurag Malik ◽  
Yazid Tikhamarine ◽  
Mohammad AmirRahmani ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Performance Metrics ◽  
Absolute Error ◽  
Hybrid Models ◽  
Percentage Error ◽  
Scour Depth ◽  
Box Plots ◽  
Taylor Diagram ◽  
Artificial Neural

A spillway is a structure used to regulate the discharge flowing from hydraulic structures such as a dam. It also helps to dissipate the excess energy of water through the still basins. Therefore, it has a significant effect on the safety of the dam. One of the most serious problems that may be happening below the spillway is bed scouring, which leads to soil erosion and spillway failure. This will happen due to the high flow velocity on the spillway. In this study, an alternative to the conventional methods was employed to predict scour depth (SD) downstream of the ski-jump spillway. A novel optimization algorithm, namely, Harris hawks optimization (HHO), was proposed to enhance the performance of an artificial neural network (ANN) to predict the SD. The performance of the new hybrid ANN-HHO model was compared with two hybrid models, namely, the particle swarm optimization with ANN (ANN-PSO) model and the genetic algorithm with ANN (ANN-GA) model to illustrate the efficiency of ANN-HHO. Additionally, the results of the three hybrid models were compared with the traditional ANN and the empirical Wu model (WM) through performance metrics, viz., mean absolute error (MAE), root mean square error (RMSE), coefficient of correlation (CC), Willmott index (WI), mean absolute percentage error (MAPE), and through graphical interpretation (line, scatter, and box plots, and Taylor diagram). Results of the analysis revealed that the ANN-HHO model (MAE = 0.1760 m, RMSE = 0.2538 m) outperformed ANN-PSO (MAE = 0.2094 m, RMSE = 0.2891 m), ANN-GA (MAE = 0.2178 m, RMSE = 0.2981 m), ANN (MAE = 0.2494 m, RMSE = 0.3152 m) and WM (MAE = 0.1868 m, RMSE = 0.2701 m) models in the testing period. Besides, graphical inspection displays better accuracy of the ANN-HHO model than ANN-PSO, ANN-GA, ANN, and WM models for prediction of SD around the ski-jump spillway.

COMPARATIVE ANALYSIS OF PREDICTION TECHNIQUES ON THE BASIS OF TELECOM CUSTOMER CHURN

2021 ◽  
Vol 16 (9) ◽  
Author(s):  
Yasser Khan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Performance Metrics ◽  
Learning Algorithm ◽  
Data Sets ◽  
Data Set ◽  
Broadband Service ◽  
Customer Churn ◽  
Artificial Neural ◽  
Prediction Techniques

Telecommunication customer churn is considered as major cause for dropped revenue and customer baseline of voice, multimedia and broadband service provider. There is strong need on focusing to understand the contributory factors of churn. Now considering factors from data sets obtained from Pakistan major telecom operators are applied for modeling. On the basis of results obtained from the optimal techniques, comparative technical evaluation is carried out. This research study is comprised mainly of proposition of conceptual frame work for telecom customer churn that lead to creation of predictive model. This is trained tested and evaluated on given data set taken from Pakistan Telecom industry that has provided accurate & reliable outcomes. Out of four prevailing statistical and machine learning algorithm, artificial neural network is declared the most reliable model, followed by decision tree. The logistic regression is placed at last position by considering the performance metrics like accuracy, recall, precision and ROC curve. The results from research has revealed main parameters found responsible for customer churn were data rate, call failure rate, mean time to repair and monthly billing amount. On the basis of these parameter artificial neural network has achieved 79% more efficiency as compare to low performing statistical techniques.

scholarly journals Flood Risk Prediction for a Hydropower System using Artificial Neural Network

2019 ◽  
Vol 8 (4) ◽  
pp. 6177-6181
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Water Flow ◽  
Performance Metrics ◽  
Water Discharge ◽  
Mean Square ◽  
Ann Model ◽  
Elman Neural Network ◽  
Artificial Neural

Hydropower scheme would experience issue relating to high flooding especially at low lying area due to extreme raining season. To mitigate the potential risk of flooding and improve the hydroelectric regulation, a flow prediction is needed to estimate the discharge of water flow at hydroelectric reservoirs. Artificial Neural Network (ANN) model were used in this research to forecast the water discharge of hydroelectric station. The discharge flow predictions were made based on fore bay elevation, inflow and the discharge of water flow. Elman Neural Network architecture was selected as ANN method and its performance was evaluated by considering the number of hidden nodes and training methods. ANN model performance were assessed using performance metrics such as Root Mean Square Error (RMSE), Mean Square Error (MSE), Mean Absolute Error (MAE) and Sum Square Error (SSE). The result indicate that ANN model showed the best applicability for discharge prediction with small performance metric.

Utilizing Artificial Neural Network for Real-Time Prediction of Differential Sticking Symptoms

2021 ◽  
Author(s):  
Meor M. Meor Hashim ◽  
M. Hazwan Yusoff ◽  
M. Faris Arriffin ◽  
Azlan Mohamad ◽  
Dalila Gomes ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Real Time ◽  
Performance Metrics ◽  
Confusion Matrix ◽  
Model Development ◽  
Data Sets ◽  
Proper Training ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Abstract Stuck pipe is one of the leading causes of non-productive time (NPT) while drilling. Machine learning (ML) techniques can be used to predict and avoid stuck pipe issues. In this paper, a model based on ML to predict and prevent stuck pipe related to differential sticking (DS) is presented. The stuck pipe indicator is established by detecting and predicting abnormalities in the drag signatures during tripping and drilling activities. The solution focuses on detecting differential sticking risk via assessing hookload signatures, based on previous experience from historical wells. Therefore, selecting the proper training set has proven to be a crucial stage of model development, especially considering the challenges in data quality. The model is trained with historical wells with and without differential sticking issues. The solution is based on the Artificial Neural Network (ANN) approach. The model is designed to provide users, i.e., driller or monitoring specialist, a warning whenever a risk is identified. Since multi-step forecasting is used, the warning is given with enough time for the driller or monitoring specialist to evaluate which preventative action or intervention is necessary. The warnings are provided typically between 30 minutes and 4 hours ahead. The model validation includes the performance metrics and a confusion matrix. Practical cases with real-time wells are also provided. The ML model was proven robust and practical with our data sets, for both historical and live wells. The huge amount of data produced while drilling holds valuable information and when smartly fed into an Artificial Intelligence (AI) model, it can prevent NPT such as stuck pipe events as demonstrated in this paper.

Knowledge-Based Optimization of Artificial Neural Network Topology for Process Modeling of Fused Deposition Modeling

2018 ◽  
Author(s):  
Hari P. N. Nagarajan ◽  
Hesam Jafarian ◽  
Azarakhsh Hamedi ◽  
Hossein Mokhtarian ◽  
Romaric Prod'hon ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Fused Deposition Modeling ◽  
Performance Metrics ◽  
Expert Knowledge ◽  
Production Quality ◽  
Fused Deposition ◽  
Knowledge Based ◽  
Deposition Modeling ◽  
Artificial Neural

Additive manufacturing (AM) continues to rise in popularity due to its various advantages over traditional manufacturing processes. AM interests industry, but achieving repeatable production quality remains problematic for many AM technologies. Thus, modeling the influence of process variables on the production quality in AM can be highly beneficial in creating useful knowledge of the process and product. An approach combining dimensional analysis conceptual modeling, mutual information based analysis, experimental sampling, factors selection, and modeling based on Knowledge-Based Artificial Neural Network (KB-ANN) is proposed for Fused Deposition Modeling (FDM) process. KB-ANN reduces the excessive amount of training samples required in traditional neural networks. The developed KB-ANN’s topology for FDM, integrates existing literature and expert knowledge of the process. The KB-ANN is compared to conventional ANN using prescribed performance metrics. This research presents a methodology to concurrently perform experiments, classify influential factors, limit the effect of noise in the modeled system, and model using KB-ANN. This research can contribute to the qualification efforts of AM technologies.

scholarly journals Application of gene expression programming, artificial neural network and multilinear regression in predicting hydrochar physicochemical properties

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Jibril Abdulsalam ◽  
Abiodun Ismail Lawal ◽  
Ramadimetja Lizah Setsepu ◽  
Moshood Onifade ◽  
Samson Bada
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Artificial Neural Network ◽  
Performance Metrics ◽  
Gene Expression Programming ◽  
Mean Bias Error ◽  
Energy Yield ◽  
Multilinear Regression ◽  
Soft Computing Techniques ◽  
Artificial Neural

AbstractGlobally, the provision of energy is becoming an absolute necessity. Biomass resources are abundant and have been described as a potential alternative source of energy. However, it is important to assess the fuel characteristics of the various available biomass sources. Soft computing techniques are presented in this study to predict the mass yield (MY), energy yield (EY), and higher heating value (HHV) of hydrothermally carbonized biomass using Gene Expression Programming (GEP), multiple-input single output-artificial neural network (MISO-ANN), and Multilinear regression (MLR). The three techniques were compared using statistical performance metrics. The coefficient of determination (R2), mean absolute error (MAE) and mean bias error (MBE) were used to evaluate the performance of the models. The MISO-ANN with 5-10 to 10-1 and 5-15-15-1 network architectures provided the most satisfactory performance of the three proposed models (R2 = 0.976, 0.955, 0.996; MAE = 2.24, 2.11, 0.93; MBE = 0.16, 0.37, 0.12) for MY, EY and HHV, respectively. The GEP technique’s ability to predict hydrochar properties based on the input parameters was found to be satisfactory, while MLR provided an unsatisfactory predictive model. Sensitivity analysis was conducted, and the analysis revealed that volatile matter (VM) and temperature (Temp) have more influence on the MY, EY, and HHV.

scholarly journals Investigating the occupant existence to reduce energy consumption by using a hybrid artificial neural network with metaheuristic algorithms

2022 ◽  
Vol 11 (1) ◽  
pp. 91-104 ◽  
Author(s):  
Nehal Elshaboury
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Energy Consumption ◽  
Carbon Dioxide Emissions ◽  
Performance Metrics ◽  
Mean Squared Error ◽  
Gravitational Search Algorithm ◽  
Metaheuristic Algorithms ◽  
Artificial Neural ◽  
Hybrid Artificial Neural Network

There is an acute need to evaluate the energy consumption of buildings in response to climate change. The “occupant” factor has been largely overlooked in building energy analysis. This research aims at investigating occupancy existence in the office environment using a hybrid artificial neural network with metaheuristic algorithms for improved energy management. It proposes and compares three classification models, namely particle swarm optimization (PSO), gravitational search algorithm (GSA), and hybrid PSO-GSA in combination with the feedforward neural network (FFNN). The inputs to these models are data related to temperature, humidity, light, and carbon dioxide emissions. Two data sets are used for testing the models while the office door is open and closed. The capabilities of the optimized models are evaluated using best, average, median, and standard deviation of the mean squared error. Most of the performance metrics indicate that the FFNN-PSO-GSA model exhibits better performance compared to the other models using the two datasets. The proposed model yields a classification accuracy ranging between 98.47-98.73% using one predictor (i.e., temperature). Besides, it yields an accuracy ranging between 85.45-94.03% using temperature and CO2 predictors. It can be concluded that the FFNN combined with PSO and GSA algorithms can be a useful tool for occupancy detection modeling.

Sign in / Sign up

Export Citation Format

Share Document