scholarly journals Investigating the impacts of the SVCs and the SCs affecting to the transient stability in multi-machine power system

2016 ◽  
Vol 19 (2) ◽  
pp. 16-24
Author(s):  
Quang Huu Vinh Luu
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Reactive Power ◽  
Voltage Regulation ◽  
State Variables ◽  
Static Var Compensators ◽  
Transient Energy ◽  
Voltage Frequency ◽  
Power Outputs ◽  
Synchronous Condensers

A new algorithm simulating the impacts of the VAR supporting devices such as the static var compensators (SVCs) and the synchronous condensers (SCs) under condition of symmetrical disturbances in multi-machine power system is mentioned. Some typical numerical examples are presented in this article. The comparisons of variation of the state parameters, such as the voltage, frequency, reactive power outputs and asynchronous torques…are simulated under condition of the action of the automatic voltage regulation systems of generators and of the VAR supporting devices. The transient energy margins are calculated and compared to assess the transient stability in multi-machine power system. Basing on this algorithm, the PC program uses the elements of the eigen-image matrix to bring the specific advantages for the simulation of the transient features of state variables.

scholarly journals Investigating the impacts of asynchronous torque affecting to the transient stability in multi-machine power system

2014 ◽  
Vol 17 (2) ◽  
pp. 27-38 ◽  
Author(s):  
Quang Huu Vinh Luu
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Voltage Regulation ◽  
Synchronous Machines ◽  
Regulation System ◽  
Numerical Examples ◽  
Static Var Compensators ◽  
Transient Voltages ◽  
The Impact

A new algorithm simulating the impact of asynchronous torque to the transient stability of multi-machine power system is mentioned and some typical numerical examples are presented in this article. Based on the proposed algorithm this PC program uses the elements of the eigen-image matrix to bring the specific advantages for the calculations of the transient stability of multi-machine power system.The symmetrical and unsymmetrical transient voltages of the VAR supporting devices such as the static var compensators, synchronous machines are simulated under condition of action of the automatic voltage regulation system and the transient frequencies relating to the action of the asynchronous torque are simulated for analyzing of the transient stability in multi-machine power system.

Automatic Gain Controller for Variable Speed Wind Turbines

2008 ◽  
Vol 9 (1) ◽  
Author(s):  
Mohamed S ElMoursi
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Reactive Power ◽  
Stability Margin ◽  
Voltage Regulation ◽  
Primary Control ◽  
Voltage Reference ◽  
Voltage Profile ◽  
Frequency Model ◽  
Interconnected Power System

This paper presents a novel controller for DFIG based wind parks, designed to achieve more efficient voltage regulation, reactive power compensation and to enhance the transient stability margin of the interconnected power system. The supervisory-secondary voltage control is used to generate the local voltage reference, providing an improved overall voltage profile, while combining an automatic gain controller (AGC) to improve the transient response of the primary control loop. The controller is implemented and tested with a power system comprising of a lumped, fundamental frequency model of a DFIG based wind park, and hydro and diesel generators connected to the electric grid. The performance of the controller was investigated for both steady-state improvements as well as under extreme contingencies to demonstrate its benefits.

A Simple Design Approach for Excitation Controller and Power System Stabilizer

2010 ◽  
Author(s):  
G. Fusco ◽  
M. Russo
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Short Circuit ◽  
Design Procedure ◽  
Voltage Regulation ◽  
Operating Conditions ◽  
Power System Stabilizer ◽  
Simple Design ◽  
Wide Range ◽  
System Stabilizer

This paper proposes a simple design procedure to solve the problem of controlling generator transient stability following large disturbances in power systems. A state-feedback excitation controller and power system stabilizer are designed to guarantee robustness against uncertainty in the system parameters. These controllers ensure satisfactory swing damping and quick decay of the voltage regulation error over a wide range of operating conditions. The controller performance is evaluated in a case study in which a three-phase short-circuit fault near the generator terminals in a four-bus power system is simulated.

Research on Fast Decoupled Load Flow Method of Power System

2015 ◽  
Vol 740 ◽  
pp. 438-441 ◽  
Author(s):  
Wei Zheng ◽  
Fang Yang ◽  
Zheng Dao Liu
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Power Flow ◽  
Reactive Power ◽  
Voltage Regulation ◽  
Load Flow ◽  
Reactive Power Optimization ◽  
Flow Calculation ◽  
Steady State Operation ◽  
Numerical Simulation Methods

The power flow calculation is study the steady-state operation of the power system as basic electrical calculations. It is given the power system network topology, device parameters and determines system health boundary conditions, draw a detailed operating status of the power system through numerical simulation methods, such as voltage amplitude and phase angle on the bus system the power distribution and the power loss. Flow calculation is the power system operation, planning and safety, reliability analysis, is fundamental to the system voltage regulation, network reconfiguration and reactive power optimization must call the function, so the trend has very important significance to calculate the power system.

A Procedure of Drawing up Integral Indicators for Comprehensively Estimating the Properties of Electric Power System Nodes

Vestnik MEI ◽  
2021 ◽  
Vol 3 (3) ◽  
pp. 11-18
Author(s):  
Nailia Sh. Chemborisova ◽  
◽  
Ivan D. Chernenkov ◽  
Keyword(s):  
Power System ◽  
Electric Power ◽  
Reactive Power ◽  
Voltage Regulation ◽  
Reactive Power Compensation ◽  
Electric Power System ◽  
Power Losses ◽  
System Operation ◽  
Active Power Losses ◽  
System Nodes

The problem of selecting the electric power system control nodes is studied. By performing control of these modes, matters concerned with providing reliable power supply of the required quality to consumers can be settled in the most efficient manner. As an example, a fragment of the electric power system mathematical model used in the Finist mode-setting simulator for a power system dispatch control center operator is considered, which represents a highly branched electrical network consisting of eleven 110 kV nodes, three 220 kV nodes connected with the system, and two generator nodes. A new procedure for selecting the control nodes is proposed, which takes into account a combination of different indicators having different measurement units, dimensions and scales is proposed. These indicators characterize the following properties of power system nodes: the reactive power fraction absorbed at a node, the sensitivity of voltage to reactive load variations, the number of connected power lines, and statistical indicators characterizing the change of voltage at the nodes and reactive power flows for different options of installing the reactive power compensation devices. For combined use of these indicators, they were ranked according to the efficiency of installing reactive power compensation devices in the system. For each indicator, a scale of five ranks (intervals) is set, which determine the preferences (qualitative judgments) of the researcher in evaluating the reactive power compensation devices installation efficiency at the system nodes. The highest rank (5) corresponds to the maximum efficiency, and the lowest rank (1) corresponds to the minimum efficiency. To calculate the individual (integral) priority indicator of installing reactive power compensation devices, the ranks of indicators are added together, and their sum is divided by the product of the number of ranks by the number of the used indicators (features). Based on the calculation results, the rating (location) of each node is determined, and the nodes for installing the reactive power compensation devices are selected according to their effect on ensuring the electric power system operation reliability, active power losses in the network, and voltage regulation. Thus, a new procedure is presented for determining the integral indicators for comprehensively estimating the properties of complex electric power system nodes and selecting the controlled nodes using a system of various indicators. These indicators characterize the studied nodes in terms of the efficiency of installing reactive power compensation devices to reduce active power losses in the network, voltage regulation, and ensuring the electric power system operational reliability. The validity of the results obtained in the study is confirmed by their comparison with the indicators of the balance-conductivity method, which has proven itself in solving problems connected with determining the nodes for controlling electric power system operation modes.

scholarly journals Dynamic Stability Improvement of Power System with VSC-HVDC Transmission

2018 ◽  
Vol 7 (3.27) ◽  
pp. 500
Author(s):  
R Vasudevan ◽  
S Ramalakshmi
Keyword(s):  
Power System ◽  
Dynamic Stability ◽  
High Voltage ◽  
Transient Stability ◽  
Reactive Power ◽  
Average Frequency ◽  
Management Approach ◽  
Communication Delays ◽  
Hvdc Transmission ◽  
Central Controller

A new management approach for the reactive-power injections of Voltage supply Converters in High Voltage DC (VSC-HVDC) multi-terminal Systems to enhance grid transient stability. A reactive-power supplementary signal is provided for each convertor. Its worth is proportional to the frequency deviation of its consequent AC bus with admiration to the weighed-average frequency of the multiterminal system stations. The hope is to extend (decrease) the magnetism torsion of generators close to those terminals during which the frequency is superior to (below) the weighed-average frequency used. The AC frequency for all VSC stations is ever more accessible regionally for synchronization functions and will be utilized by a central controller. Simulations are allotted victimization PSS/E and therefore the outcome have revealed that transient stability is enlarged victimization this approach. Since this approach uses world capability of all VSC stations, the collision of the communication delays has been analyzed, concluding that the depressing consequence is modest, for realistic latency values. 

scholarly journals Analysis and design of different controllers for non-linear power systems

2013 ◽  
Vol 2 (3) ◽  
pp. 216
Author(s):  
Rekha Chaudhary ◽  
Arun Kumar Singh
Keyword(s):  
Power Systems ◽  
Power System ◽  
Feedback Linearization ◽  
Transient Stability ◽  
Voltage Regulation ◽  
Analysis And Design ◽  
Non Linear ◽  
Terminal Voltage ◽  
Initial Power ◽  
Direct Feedback

The objective of this paper is to design controller for non-linear power system using Direct Feedback Linearization technique to improve the transient stability and to achieve better voltage regulation. In case of fault in the power system, power angle and the terminal voltage are the parameters which are to be monitored. The simulation has been carried out taking different values of initial power angles and results were obtained for power angle and terminal voltage. To overcome the demerits of DFL-LQ optimal controller and DFL voltage regulator, co-ordinated controller is proposed. Simulation results show that transient stability of a power system under a large sudden fault has been improved by using co-ordinated controller.

Sign in / Sign up

Export Citation Format

Share Document