scholarly journals ФОРМУВАННЯ АВІАЦІЙНИХ КОНСТРУКЦІЙ МЕТОДОМ 3Д ДРУКУ

2018 ◽  
pp. 13-21
Author(s):  
Андрій Олегович Закревський ◽  
Ярослав Сергійович Козей ◽  
Віталій Вікторович Cухов
Keyword(s):  
3D Printing ◽  
Unmanned Aerial Vehicle ◽  
Three Dimensional ◽  
Unmanned Aircraft ◽  
Topological Optimization ◽  
3D Printer ◽  
Minimum Mass ◽  
Aerial Vehicle ◽  
Solid Works ◽  
Standard Designs

The subject of the study in the article is the principles of the formation of a constructive-power scheme for the glider of an unmanned aerial vehicle and the possibility of using additive technologies for its creation. The goal is the formation of a structural and power scheme for the glider of an unmanned aerial vehicle of minimum mass, providing the necessary strength parameters and investigating the possibility of 3D printing of the resulting structure. The tasks to be solved are: based on the results of topological optimization in the package of Siemens PLMNX and Solid Works 2018; to choose the constructive-power scheme of the fuselage and the wing; after carrying out optimization, create a three-dimensional assembly of the airframe; perform the manufacture of the necessary aggregates and parts on a 3D printer. The following results are obtained. Topological optimization of the design of the wing and fuselage of an unmanned aerial vehicle using the Siemens PLMNX package and Solid Works 2018 was carried out. In selected CAM/CAD/CAE systems, topological optimization analysis was carried out in terms of speed, quality and processing of the TO results. The optimal design of the fuselage's fuselage structure and wings was developed, and a three-dimensional airframe assembly was created. The possibility of 3D printing of the received structure is investigated. With the help of 3D printer, the basic units of the glider of the unmanned aircraft are made. Using the capabilities of 3D printer along with topological optimization allows creating non-standard designs. When designing thin-walled parts for 3D printing, it is necessary to take into account such factors as insufficient adhesion of the layers. To avoid delamination, it is necessary to strengthen the part, in the case of the wing - add stringer or spar. Topological optimization allows rational use of the material and greatly facilitates the entire structure. Conclusions. It is reported that the use of 3D printer capabilities, together with topological optimization, makes it possible to obtain a glider of an unmanned aerial vehicle of minimum mass

Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology

2013 ◽  
Vol 397-400 ◽  
pp. 970-980 ◽  
Author(s):  
Noor A. Ahmed ◽  
J.R. Page
Keyword(s):  
3D Printing ◽  
Unmanned Aerial Vehicle ◽  
Three Dimensional ◽  
Small Scale ◽  
Project Design ◽  
Test Model ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Aerial Vehicle ◽  
Dimensional Printing

The phenomenal growth in three-dimensional printing technology has the potential of ushering in the next wave of industrial revolution. As part of an advanced project design conducted at the Aerospace Engineering of the University of New South, the concept of a printable unmanned aerial vehicle was explored. A subsequent small scale test model was manufactured using three-dimensional printing technology for wind tunnel testing and validation. The exercise demonstrates the huge potential of such printing technology in future aircraft designs.Key words: 3D printing, design, manufacture, UAV

scholarly journals Efficient 3D printing via photooxidation of ketocoumarin based photopolymerization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaoyu Zhao ◽  
Ye Zhao ◽  
Ming-De Li ◽  
Zhong’an Li ◽  
Haiyan Peng ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Visible Light ◽  
Light Exposure ◽  
Three Dimensional ◽  
3D Printer ◽  
Light Penetration ◽  
Viable Solution

AbstractPhotopolymerization-based three-dimensional (3D) printing can enable customized manufacturing that is difficult to achieve through other traditional means. Nevertheless, it remains challenging to achieve efficient 3D printing due to the compromise between print speed and resolution. Herein, we report an efficient 3D printing approach based on the photooxidation of ketocoumarin that functions as the photosensitizer during photopolymerization, which can simultaneously deliver high print speed (5.1 cm h−1) and high print resolution (23 μm) on a common 3D printer. Mechanistically, the initiating radical and deethylated ketocoumarin are both generated upon visible light exposure, with the former giving rise to rapid photopolymerization and high print speed while the latter ensuring high print resolution by confining the light penetration. By comparison, the printed feature is hard to identify when the ketocoumarin encounters photoreduction due to the increased lateral photopolymerization. The proposed approach here provides a viable solution towards efficient additive manufacturing by controlling the photoreaction of photosensitizers during photopolymerization.

scholarly journals Supercritical Impregnation of PLA Filaments with Mango Leaf Extract to Manufacture Functionalized Biomedical Devices by 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2125
Author(s):  
José María Rosales ◽  
Cristina Cejudo ◽  
Lidia Verano ◽  
Lourdes Casas ◽  
Casimiro Mantell ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
3D Printing ◽  
Polylactic Acid ◽  
Leaf Extract ◽  
Three Dimensional ◽  
3D Printer ◽  
Pharmacological Properties ◽  
Bioactive Properties ◽  
Supercritical Impregnation ◽  
Mango Leaves

Polylactic Acid (PLA) filaments impregnated with ethanolic mango leaves extract (MLE) with pharmacological properties were obtained by supercritical impregnation. The effects of pressure, temperature and amount of extract on the response variables, i.e., swelling, extract loading and bioactivity of the PLA filaments, were determined. The analysis of the filaments biocapacities revealed that impregnated PLA filaments showed 11.07% antidenaturant capacity and 88.13% antioxidant activity, which after a 9-day incubation shifted to 30.10% and 9.90%, respectively. Subsequently, the same tests were conducted on printed samples. Before their incubation, the printed samples showed 79.09% antioxidant activity and no antidenaturant capacity was detected. However, after their incubation, the antioxidant activity went down to only 2.50%, while the antidenaturant capacity raised up to 23.50%. The persistence of the bioactive properties after printing opens the possibility of using the functionalized PLA filaments as the feed for a three-dimensional (3D) printer.

Research on the printing error of tilted vertical beams in delta-robot 3D printers

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuezong Wang ◽  
Jinghui Liu ◽  
Mengfei Guo ◽  
LiuQIan Wang
Keyword(s):  
3D Printing ◽  
Kinematic Model ◽  
Three Dimensional ◽  
3D Printer ◽  
Simulation Approach ◽  
Content Type ◽  
Printing Quality ◽  
Delta Robot ◽  
Error Generation ◽  
Error Simulation

Purpose A three-dimensional (3D) printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. The purpose of this study is to analyze the influence of such errors on printing accuracy and printing quality for delta-robot 3D printer. Design/methodology/approach First, the kinematic model of a delta-robot 3D printer with an ideal geometric structure is proposed by using vector analysis. Then, the normal kinematic model of a nonideal delta-robot 3D robot with tilted vertical beams is derived based on the above ideal kinematic model. Finally, a 3D printing error simulation approach is proposed to analyze the influence of tilted vertical beams on the 3D printing accuracy. Findings The results show that tilted vertical beams can indeed cause 3D printing errors and further influence the 3D printing quality of the final products and that the 3D printing errors of tilted vertical beams are related to the rotation angles of the tilted vertical beams. The larger the rotation angles of the tilted vertical beams are, the greater the geometric deformations of the printed structures. Originality/value Three vertical beams and six horizontal beams constitute the supporting parts of the frame of a delta-robot 3D printer. In this paper, the orientations of tilted vertical beams are shown to have a significant influence on 3D printing accuracy. However, the effect of tilted vertical beams on 3D printing accuracy is difficult to capture by instruments. To reveal the 3D printing error mechanisms under the condition of tilted vertical beams, the error generation mechanism and the quantitative influence of tilted vertical beams on 3D printing accuracy are studied by simulating the parallel motion mechanism of a delta-robot 3D printer with tilted vertical beams.

scholarly journals Implementing a 3D printing service in a biomedical library

2017 ◽  
Vol 105 (1) ◽  
Author(s):  
Verma Walker, MLIS
Keyword(s):  
Problem Solving ◽  
3D Printing ◽  
3D Modeling ◽  
Three Dimensional ◽  
National Institutes Of Health ◽  
3D Printer ◽  
Service Model ◽  
Steep Learning Curve ◽  
3D Printers ◽  
Creative Problem

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

scholarly journals PRELIMINARY EVALUATION OF ATMOSPHERIC TEMPERATURE AND WIND PROFILES OBTAINED USING UNMANNED AERIAL VEHICLE BASED ACOUSTIC TOMOGRAPHY

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 283-287 ◽  
Author(s):  
A. Finn ◽  
K. Rogers ◽  
J. Meade ◽  
J. Skinner ◽  
A. Zargarian
Keyword(s):  
Wind Velocity ◽  
Unmanned Aerial Vehicle ◽  
Sound Speed ◽  
Three Dimensional ◽  
Atmospheric Temperature ◽  
Preliminary Evaluation ◽  
Sound Fields ◽  
Aerial Vehicle ◽  
Wind Profiles ◽  
Virtual Temperature

<p><strong>Abstract.</strong> An acoustic signature generated by an unmanned aerial vehicle is used in conjunction with tomography to remotely sense temperature and wind profiles within a volume of atmosphere up to an altitude of 120&amp;thinsp;m and over an area of 300&amp;thinsp;m&amp;thinsp;&amp;times;&amp;thinsp;300&amp;thinsp;m. Sound fields recorded onboard the aircraft and by an array of microphones on the ground are compared and converted to sound speed estimates for the ray paths intersecting the intervening medium. Tomographic inversion is then used to transform these sound speed values into three-dimensional profiles of virtual temperature and wind velocity, which enables the atmosphere to be visualised and monitored over time. The wind and temperature estimates obtained using this method are compared to independent measurements taken by a co-located mid-range ZephIR LIDAR and sensors onboard the aircraft. These comparisons show correspondences to better than 0.5&amp;thinsp;&amp;deg;C and 0.3&amp;thinsp;m/s for temperature and wind velocity, respectively.</p>

scholarly journals Design and implementation of a three dimensions (3D) printer for modeling and pre-manufacturing applications

2019 ◽  
Vol 9 (6) ◽  
pp. 4749
Author(s):  
Ghazi Qaryouti ◽  
Abdel Rahman Salbad ◽  
Sohaib A. Tamimi ◽  
Anwar Almofleh ◽  
Wael A. Salah ◽  
...  
Keyword(s):  
3D Printing ◽  
Manufacturing Sector ◽  
Low Cost ◽  
Three Dimensional ◽  
Three Dimensions ◽  
3D Printer ◽  
Overall Design ◽  
Design And Implementation ◽  
Manufacturing Applications ◽  
Functional Components

The three-dimensional (3D) printing technologies represent a revolution in the manufacturing sector due to their unique characteristics. These printers arecapable to increase the productivitywithlower complexity in addition tothe reduction inmaterial waste as well the overall design cost prior large scalemanufacturing.However, the applications of 3D printing technologies for the manufacture of functional components or devices remain an almost unexplored field due to their high complexity. In this paper the development of 3D printing technologies for the manufacture of functional parts and devices for different applications is presented. The use of 3D printing technologies in these applicationsis widelyused in modelingdevices usually involves expensive materials such as ceramics or compounds. The recent advances in the implementation of 3D printing with the use of environmental friendly materialsin addition to the advantages ofhighperformance and flexibility. The design and implementation of relatively low-cost and efficient 3D printer is presented. The developed prototype was successfully operated with satisfactory operated as shown from the printed samples shown.

Sign in / Sign up

Export Citation Format

Share Document