scholarly journals Analisis Pengendalian Persediaan Bahan Baku Packing Menggunakan Metode Joint Replenishment Problem

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Suseno Suseno ◽  
Pitri Riyanti

PT Out Of Asia is an exporting company that produces handicraft products. All products in the company are semi-finished products from suppliers who performed the finishing and packing stage. The production process system is done by the company varies according to the demand of the consumer, so the raw material of packing needed also vary. However, the increasing number of consumer demand is increasingly binding, it will also increase the demand for packing raw materials, so it is necessary to control the supply of raw materials packing to minimize the cost of raw material inventory according to storage capacity and packing production capability. In addition, ordering of raw materials can be done in combination to save raw material inventory. The method used in this research is Joint Replenishment Problem (JRP) and (Economic Order Quantity (EOQ) method, to compare total inventory cost using Joint Replenishment Probe (JRP) and Economic Order Quantity (EOQ) method. The research shows that total cost the minimum inventory using Joint Replenishment Problem (JRP) method is Rp 1,180,246,601 / year compared to use the Economic Order Quantity (EOQ) method of Rp 4,326,163,356 / year, with the difference of comparison using JRP and EOQ of Rp 3,145,916,750/ year

2019 ◽  
Vol 1 (2) ◽  
pp. 415-423
Author(s):  
Elia Rahayu R ◽  
Nor Norisanti ◽  
Acep Samsudin

The purpose of this study is to control the supply of raw materials using the Economic Order Quantity (EOQ) method in Tahu Nugraha Jaya Sukabumi UKM. The data analysis method used is quantitative descriptive to describe and describe the data to be examined and then processed using EOQ. This study uses the EOQ method to determine the total inventory cost. The data needed in this study are the number of purchases of raw materials, the amount of use of raw materials, storage costs, and ordering costs. The results of this study indicate that by applying the EOQ method can further optimize the supply of raw materials by minimizing raw materials with increased inventory. With the application of the Economic Order Quantity (EOQ) method it shows more efficient than conventional methods of the company. Conclusions, seen from the difference in the TIC of the two methods, the more efficient method is the Economic Order Quantity (EOQ) method that is equal to 244,392.94 while the calculation used by the company is 374,325. so that it can be obtained that there is a difference between the Company TIC and the EIC method TIC. Keywords: Raw Material Inventory, Production Process


2020 ◽  
Vol 2 (2) ◽  
pp. 340
Author(s):  
Rizkyani Pratama ◽  
Yulius H Saptomo ◽  
Dirarini Sudarwadi

Controlling and determining of inventory is an important thing in order to produce efficiently and able to make smooth sales. The purpose of this research is to know an analysis of controlling raw material inventoriesin the manufacture of brick by using Economic Order Quantity (EOQ) method to increase efficiency of the total inventory costin Stan Kayu Sinar Sowi. The raw material of brick is rough sand and cements. Type of case study research through a qualitative approach by means of interviews, observation and documentation. Case study on a wood booth business in Manokwari, West Papua. The results of the study that the purchase of raw materials made by the company is considered less efficient, because company policies tend to cause expenditure to be greater in the amount of Rp.606,620,250 for 12 months (1 period), while using the Economic Order Quantity (EOQ) method will issue a fee of Rp.550,712,500 for the same period. Using the Economic Order Quantity (EOQ) method, the order quantity is higher and the order frequency will be lower, resulting in order cost savings and increasing the total inventory cost efficiency.


2020 ◽  
Vol 2 (1) ◽  
pp. 22
Author(s):  
Sandi Wardani ◽  
Sri Rahayuningsih ◽  
Ana Komari

This study aims to analyze the availability of raw materials at PT. Akasha Wira Internasional Tbk, analyzes the total cost of raw material inventories, analyzes to reorder point raw materials, analyzes the amount of safety stock of raw materials, analyzes raw material inventory control. The analytical method used is the Economic Order Quantity method, which is to find out the optimal order or purchase quantity with the aim of minimizing inventory costs consisting of ordering costs and storage costs. The results showed that the purchase of optimal ades 1500 ML label raw materials according to the Economic Order Quantity method during the 2017 period for each message was greater than what the company did. The optimal purchase of raw materials that must be done by the company in 2017 is 397 m with the frequency of ordering that must be done as much as 2 times. The safety stock quantity that must be available in the warehouse is 480.15 m and the Re Order Point according to the Economic Order Quantity is at the time of the inventory in the warehouse is 512.91 m. The total inventory cost for the production process incurred according to the Economic Order Quantity method is smaller than the total inventory cost incurred by the company. Keywords: Inventory, Raw Materials, Economic Order Quantity  Penelitian ini bertujuan untuk menganalisis ketersediaan bahan baku di PT. Akasha Wira Internasional Tbk, menganalisis total biaya persediaan bahan baku, menganalisis untuk melakukan pemesanan kembali (reorder point) bahan baku, menganalisis jumlah persediaan pengamanan barang  (safety stock) bahan baku, menganalisis pengendalian persediaan bahan baku. Penggunaan pendekatan yaitu metode Economic Order Quantity sebagai cara menyimpan bahan baku untuk ketersediaan biaya pesan dan biaya simpan bahan baku. Data yang diperoleh adalah data primer dan data sekunder. Pada bahan baku  ades 1500 ML tahun 2017 memiliki tingkat pemesanan yang lebih tinggi. Pembelian bahan baku optimal yang harus dilakukan perusahaan pada tahun 2017 adalah sebesar 397 m dengan frekuensi pemesanan yang harus dilakukan adalah sebanyak 2 kali. Kuantitas persediaan pengaman yang harus tersedia digudang adalah sebesar 480,15 m dan titik pemesanan kembali menurut Economic Order Quantity yaitu saat persediaan digudang tinggal 512,91 m. Maka dalam proses produksi menurut EOQ lebih kecil diabnding dengan total pembiayaan dari perusahaan.  Kata Kunci :  Persediaan , Bahan Baku, Economic Order Quantity


2011 ◽  
Vol 1 (2) ◽  
pp. 144
Author(s):  
Wahyu Tri Pamungkas ◽  
Aftoni Sutanto

Research and results of the calculations carried out, when using the EOQ method in the procurement of raw material cost savings will be obtained. If the organization of the raw materials based on EOQ methods, there will be cost savings in 2008 amounted to Rp303.763.020,- in 2009 amounted Rp393.450.766,- the year 2010 amounted to Rp411.567.748,-. Thus, it means that there are very real differences between the policies conducted by Inventory Company with the calculation according to the EOQ.From the results above, it can be concluded that the supply of raw materials each year has the difference of raw material inventory, the frequency of buying raw materials when using the EOQ method is 2 times in one period (1year), limit or point of ordering raw materials which is needed by the company when using the EOQ method of 2008 amounted to 9188.81 kg in 2009 amounted to 9869.47 kg and 2010 amounted to 11105.52 kg. Total cost of raw materials inventory, calculated according to the EOQ which is less than that released by the company, then there are cost savings when the company uses EOQ method in term of raw material inventory.


2021 ◽  
Vol 11 (4) ◽  
pp. 4561-4572
Author(s):  
Haridhsah Hilmi Septiawan ◽  
Rorim Panday

This study aims to evaluate purchasing raw materials and the Home Industry Socks by using the Economic Order Quantity (EOQ) method and the compare to the company's actual method. And to find out whether the EOQ method is effective to be applied to the company. The data used in this study are in the form of notes, reports, and company documentation for the period 2017, 2018, and 2019 provided by the owner through observation, interview, documentation, and literature study. Meanwhile, the usage data, raw material prices, and raw material purchase data are obtained from company records. The analysis technique in this study used EOQ formula, standard deviation, safety stock, Total Holding Cost, Total Ordering Cost, and Total Inventory Cost. The result of this research is that EOQ method is effective to be applied to socks home industry companies to control inventory more efficiently because it can minimize inventory costs.


2020 ◽  
Vol 10 (1) ◽  
pp. 33-39
Author(s):  
Lukman Hidayat ◽  
Hidayat Koto ◽  
Hayyuning Pratiwi

           Zaskya Bakery Home Industry is one of the small industries that produce various types of sweet bread in Central Bengkulu Regency. Optimal raw material inventory control is essential for companies to make the production process good. The economic order quantity (EOQ) method is the basic method of inventory control by finding the minimum point between ordering costs and storage costs. The purpose of this study was to determine the inventory control of some raw materials in the Zaskya Bakery Home Industry by using EOQ. Survey and observation with a quantitative descriptive approach are The methods used in this research. Data analysis uses the calculation formula of EOQ, total inventory cost, safety stock, and reorder point. The results showed that the application of the EOQ method in controlling raw material inventory was an emphasis on inventory costs on the Zaskya Bakery Home Industry. The Efficiency of the quantity of raw material ordering each time order, the time of re-ordering of raw materials, as well as the quantity of safety inventory can be known.


Author(s):  
Masad Hariyadi ◽  
Boy Isma Putra

The limited supply of Nalco raw materials from producers has become a problem for PT ABC, this has led to the control of raw material inventory at PT ABC not including good management, because in the management of raw materials the company still records inventory with manual systems and in ordering raw materials only based on estimates. From the results of the study, the forecasting method used is the Double Exponential Smoothing Holt's, Brown, and Holt Winters Additive Algorithm methods, from the three methods that are most suitable is the Double Exponential Smoothing Brown method with the smallest Mean Square Error of 256.2. Calculation of Sizing Lot by using Economic Order Quantity method, Least Unit Cost method, and Silver Meal method, of the three methods the most optimal is the Economic Order Quantity method because it has the lowest cost of Rp. 12,651,145. The calculation of Safety Stock gets 17 Pail results. and for Reorder Points for Nalco Water Treatment raw material, which is 29 Pail.


2018 ◽  
Vol 1 (01) ◽  
pp. 41
Author(s):  
Wartoyo Hadi

The purpose of the implementation of this research is to find the effectiveness of supplies raw materials, the method of analysis data used in the square is the smallest trend for planning raw materials and controling supplies use method of economic order quantity (EOQ) analyze reorder point. Analysis reorder point and safety stock. And analyzes efficiency cost of raw materials. Forecasting raw materials years 20x7 according to the smallest trend, cloth and dakron happened the difference is greater than of the target needed (according to a company); controling supplies raw materials with the methods eoq in 20x7 more effective than reservations raw materials cloth and dakron and more efficient than cost raw materials. The company should review the policy of forecasting raw material supplies that had been undertaken and make planning supplies the raw material that more accurate using the firm’s historical data and not only targeting the output production next year, so that machines production can be optimized. Considering the use of control supplies with the methods economic order quantity to companies, so this analysis can determine material reservations, supplies safety, maximum supplies to avoid the risk of running out of raw materials, because the companies often happened less dressed up a result of reservations that time is inaccurate, the lack of safety stock and the deferred the delivery of goods which often disturb the production process, by this method can prevent these things, so that the production process can run smoothly and minimize the cost of raw materials supplies.


JUMINTEN ◽  
2020 ◽  
Vol 1 (4) ◽  
pp. 163-172
Author(s):  
Vify Elviana ◽  
Akmal Suryadi

Persediaan merupakan aset perusahaan yang memiliki peran penting dalam operasi bisnis, sehingga perusahaan penting untuk melakukan manajemen persediaan yang baik, artinya perusahaan harus mampu mengantisipasi kendala maupun tantangan yang ada dalam pengelolahan persediaan untuk meminimalisasi total biaya yang harus dikeluarkan oleh perusahaan. Permasalahan yang timbul pada persediaan bahan baku di PT XYZ adalah perusahaan melakukan perencanaan dan pengendalian bahan baku hanya berdasarkan pada pengalaman-pengalaman sebelumnya dan tidak berdasarkan pada metode yang sudah baku. Oleh karena itu pembelian bahan baku tidak sesuai dengan permintaan konsumen. Hal tersebut sering menyebabkan terjadinya kelebihan maupun kekurangan stok bahan baku. Kesalahan dalam penentuan besarnya investasi dalam persediaan akan mengurangi keuntungan perusahaan. Adanya persediaan bahan baku yang terlalu besar, akan menambah beban biaya pemeliharaan dan penyimpanan dalam gudang, serta kemungkinan terjadinya penurunan kualitas bahan baku yang dapat menyebabkan berkurangnya keuntungan perusahaan. Namun jika persediaan bahan baku terlalu sedikit maka akan berakibat pada terhambatnya proses produksi, sehingga tidak terpenuhinya permintaan konsumen. Hasil penelitian ini dapat menyimpulkan bahwa perencanaan kebutuhan bahan baku dengan metode perusahaan didapatkan total cost sebesar Rp 1.796.762.429,-, sedangkan metode Material Requirements Planning (MRP) didapatkan total cost sebesar Rp 1.576.011.801,-. Maka dapat disimpulkan telah terjadi penurunan total cost seluruh bahan baku sebesar 12,28%. Hal ini membuktikan bahwa metode Material Requirements Planning (MRP) lebih efisien daripada metode PT. XYZ. Oleh karena itu untuk mendapatkan total cost yang minimum, metode Material Requirements Planning (MRP) diterapkan pada periode Februari-Juni 2020 sehingga didapatkan total cost sebesar Rp 1.576.011.801,-. Kata Kunci:         Material Requirements Planning (MRP), PT XYZ, Pail Cat, Economic Order Quantity (EOQ), Period Order Quantity (POQ), Lot For Lot (LFL). ABSTRACT                     Inventory is a company asset that has an important role in business operations, so the company is important to conduct good inventory management, meaning that the company must be able to anticipate obstacles and challenges that exist in managing inventory to minimize the total cost to be incurred by the company.The problem that arises in the supply of raw materials in PT XYZ is that the company plans and controls raw materials based only on previous experiences and not based on established methods. Therefore, the purchase of raw materials is not in accordance with consumer demand. This often leads to excess or shortage of raw material stock. Mistakes in determining the amount of investment in inventories will reduce company profits. The availability of raw materials that are too large, will add to the burden of maintenance and storage costs in the warehouse, as well as the possibility of a decline in the quality of raw materials that can lead to reduced company profits. However, if the supply of raw materials is too little, it will result in obstruction of the production process, so that consumer demand is not fulfilled. The results of this study can conclude that the planning of raw material needs by the company method obtained a total cost of Rp 1,796,762,429, - while the Material Requirements Planning (MRP) method obtained a total cost of Rp 1,576,011,801, -. Then it can be concluded that there has been a decrease in the total cost of all raw materials by 12.28%. This proves that the Material Requirements Planning (MRP) method is more efficient than the PT. XYZ. Therefore, to get the minimum total cost, the Material Requirements Planning (MRP) method was applied in the February-June 2020 period so that a total cost of Rp 1,576,011,801 was obtained.   KeyWords: Material Requirements Planning (MRP), PT XYZ, Pail Cat, Economic Order Quantity (EOQ), Period Order Quantity (POQ), Lot for Lot (LFL).


2021 ◽  
Vol 5 (1) ◽  
pp. 215
Author(s):  
Arga Sutrisna ◽  
Rizki Ginanjar ◽  
Suci Putri Lestari

This research objectives aims to determine and analyze raw material inventory control, the ideal raw material inventory that the company must provide and the efficiency of production costs carried out by Jatisri Furniture Work in Tasikmalaya for the period 2018.11 – 2020.02. The data collection method in this study is by direct observation at Jatisari Furniture Work in Tasikmalaya. Using techniques such us interviews, observation, and documentation. These observations were made in production reports for the years 2018 – 2020. The analysis tool was carried out using the Economic Order Quantity (EOQ) method such us safety stock, reorder point, and total inventory cost. The result of the Economic Order Quantity (EOQ) analysis show that the total cost of raw the material inventory that must be incurred by the company is greater than the total cost of inventories calculated according to the EOQ method. Companies should follow the calculations from the EOQ method so that they can save on raw material inventory costs, so that production costs are more efficient.


Sign in / Sign up

Export Citation Format

Share Document