scholarly journals The Application of Dielectric Barrier Discharge Plasma on Fischer-Tropsch Synthesis: A Review

2021 ◽  
Vol 6 (2) ◽  
Author(s):  
Teuku Mukhriza ◽  
Hartati Oktarina
Keyword(s):  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Bubble Column ◽  
Fixed Bed ◽  
Liquid Hydrocarbon ◽  
Dbd Plasma ◽  
Fischer Tropsch ◽  
Dielectric Barrier ◽  
Molar Ratios ◽  
Ft Synthesis

Fischer-Tropsch (FT) Synthesis has been widely known for centuries as the process of converting syngas to liquid fuels. Several reactors including Slurry bubble column, fluidized-bed, and fixed bed reactors have been used for FTS on an industrial scale. Although science has seen remarkable development in technology for FT synthesis, the industry still faces challenges in optimizations of process parameters and achieved desired selectivity.  Extensive research has been continuously conducted to seek the best FT reactor offering heat uniformity and efficient heat transfer across the reactor to increase the catalytic activity and its lifetime. Dielectric Barrier Discharge (DBD) plasma has become one of the options to deal with these issues. This reactor work under low temperature delivers a synergistic effect between plasma and catalyst to break H2 and CO bond. DBD plasma is also suitable for feedstock with high H2/CO molar ratios. It is also found that FT catalyst such as cobalt catalyst used in DBD plasma was well dispersed on the support which in turn favour the selectivity toward liquid hydrocarbon.

scholarly journals Polymerization of D-Ribose in Dielectric Barrier Discharge Plasma

Plasma ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 144-149 ◽  
Author(s):  
Yingying Li ◽  
Rida Atif ◽  
Ketao Chen ◽  
Jiushan Cheng ◽  
Qiang Chen ◽  
...  
Keyword(s):  
Dielectric Barrier Discharge ◽  
Discharge Plasma ◽  
Barrier Discharge ◽  
Laser Desorption ◽  
Laser Desorption Ionization ◽  
Dielectric Barrier Discharge Plasma ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Ionization Time ◽  
Barrier Discharge Plasma

Dielectric barrier discharge (DBD) plasma has been found to uniquely polymerize ribose that is not usually subject to polymerization since molecules that tend to polymerize almost always possess at least a π-bond. The polymer was analyzed via nuclear magnetic resonance (NMR) spectra, matrix-assisted laser desorption ionization time-of-flight (MALDI TOF) mass spectroscopy and Fourier-Transform inferred spectroscopy (FTIR), and it was found that dehydration occurs during polymerization.

scholarly journals The Influence of Dielectric Barrier Discharge Plasma on the Characteristics of Aero-Engine Combustion Chamber

2019 ◽  
Vol 37 (2) ◽  
pp. 369-377
Author(s):  
Yi Chen ◽  
Li Fei ◽  
Liming He ◽  
Lei Zhang ◽  
Chunchang Zhu ◽  
...  
Keyword(s):  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Combustion Efficiency ◽  
Future Application ◽  
Outlet Temperature ◽  
Plasma Assisted Combustion ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Rich Condition ◽  
Aero Engine

A test platform was developed to investigate the performance of aero-engine combustor by the dielectric barrier discharge (DBD) plasma assisted combustion (PAC) in the simulated maximum condition. Conventional combustion experiments and plasma-assisted combustion conditions were conducted to study the effect of PAC on the performances including average outlet temperature, combustion efficiency and pattern factor under four different excessive air coefficients five different voltages. The comparative experiment shows that the combustion efficiency is improved after PAC compared with the normal conditions, the combustion efficiency of PAC increases 2.31% in the fuel-rich condition when Up-p is 40 kV. The uniformity of the outlet temperature field is also improved after PAC, the decrease of the pattern factor is more than 5% in the fuel-rich condition. These results offer certain reference value for the future application of PAC in aero-engine combustor and improving its performance.

Dielectric Barrier Discharge (DBD) Plasma Actuators for Flow Control in Turbine Engines: Simulation of Flight Conditions in the Laboratory by Density Matching

2019 ◽  
Vol 36 (2) ◽  
pp. 157-173
Author(s):  
David E. Ashpis ◽  
Douglas R. Thurman
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Test Chamber ◽  
Plasma Actuators ◽  
Chamber Pressure ◽  
Turbine Engines ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Actuator Performance

Abstract We address requirements for laboratory testing of AC Dielectric Barrier Discharge (AC-DBD) plasma actuators for active flow control in aviation gas turbine engines. The actuator performance depends on the gas discharge properties, which, in turn, depend on the pressure and temperature. It is technically challenging to simultaneously set test-chamber pressure and temperature to the flight conditions. We propose that the AC-DBD actuator performance depends mainly on the gas density, when considering ambient conditions effects. This enables greatly simplified testing at room temperature with only chamber pressure needing to be set to match the density at flight conditions. For turbine engines, we first constructed generic models of four engine thrust-classes; 300-, 150-, 50-passenger, and military fighter, and then calculated the densities along the engine at sea-level takeoff and altitude cruise conditions. The range of chamber pressures that covers all potential applications was found to be from 3 to 1256 kPa (0.03 to 12.4 atm), depending on engine-class, flight altitude, and actuator placement in the engine. The engine models are non-proprietary and can be used as reference data for evaluation requirements of other actuator types and for other purposes. We also provided examples for air vehicles applications up to 19,812 m (65,000 ft).

Experimental Analysis of Dielectric Barrier Discharge Plasma Actuators Thermal Characteristics Under External Flow Influence

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
F. F. Rodrigues ◽  
J. C. Pascoa ◽  
M. Trancossi
Keyword(s):  
Temperature Distribution ◽  
Thermal Behavior ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Thermal Characteristics ◽  
External Flow ◽  
Plasma Actuators ◽  
Plasma Region ◽  
Dbd Plasma ◽  
Dielectric Barrier

Dielectric barrier discharge (DBD) plasma actuators have several applications within the field of active flow control. Separation control, wake control, aircraft noise reduction, modification of velocity fluctuations, or boundary layer control are just some examples of their applications. They present several attractive features such as their simple construction, very low mass, fast response, low power consumption, and robustness. Besides their aerodynamic applications, these devices have also possible applications within the field of heat transfer, for example film cooling applications or ice formation prevention. However, due to the extremely high electric fields in the plasma region and consequent impossibility of applying classic intrusive techniques, there is a relative lack of information about DBDs thermal characteristics. In an attempt to overcome this scenario, this work describes the thermal behavior of DBD plasma actuators under different flow conditions. Infra-red thermography measurements were performed in order to obtain the temperature distribution of the dielectric layer and also of the exposed electrode. During this work, we analyzed DBD plasma actuators with different dielectric thicknesses and also with different dielectric materials, whose thermal behavior is reported for the first time. The results allowed to conclude that the temperature distribution is not influenced by the dielectric thickness, but it changes when the actuator operates under an external flow. We also verified that, although in quiescent conditions the exposed electrode temperature is higher than the plasma region temperature, the main heat energy dissipation occurs in the dielectric, more specifically in the plasma formation region.

scholarly journals Reduction of ammonia with Dielectric Barrier Discharge (DBD) plasma in chicken coop

2019 ◽  
Vol 1153 ◽  
pp. 012087
Author(s):  
R Saputra ◽  
E Yulianto ◽  
A Z Zain ◽  
E Sasmita ◽  
M Restiwijaya ◽  
...  
Keyword(s):  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Dbd Plasma ◽  
Dielectric Barrier

scholarly journals Synergistic Effects of Mild Heating and Dielectric Barrier Discharge Plasma on the Reduction of Bacillus Cereus in Red Pepper Powder

Foods ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 171 ◽  
Author(s):  
Eun Bi Jeon ◽  
Man-Seok Choi ◽  
Ji Yoon Kim ◽  
Shin Young Park
Keyword(s):  
Bacillus Cereus ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Synergistic Effects ◽  
Combined Treatment ◽  
Red Pepper ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Pepper Powder ◽  
Red Pepper Powder

The synergistic efficacy of a combined treatment of mild heat (MH) and dielectric barrier discharge (DBD) plasma in Bacillus cereus-contaminated red pepper powder was tested. A cocktail of three strains of B. cereus (NCCP 10623, NCCP 14579, ATCC 11778) was inoculated onto red pepper powder and then treated with MH (60 °C for 5–20 min) and DBD plasma (5–20 min). Treatment with MH and DBD plasma alone for 5–20 min resulted in reductions of 0.23–1.43 and 0.12–0.96 log CFU/g, respectively. Combined treatment with MH and DBD plasma was the most effective at reducing B. cereus counts on red pepper powder, and resulted in log-reductions of ≥6.0 log CFU/g. The largest synergistic values (4.24–4.42 log) against B. cereus in red pepper powder were obtained by the combination of 20 min MH and 5–15 min DBD plasma. The values of Hunter color ‘‘L’’, ‘‘a’’, and ‘‘b’’, were not significantly different from those of the untreated sample and that with the combination of MH (60 °C for 5–20 min) and DBD plasma (5–20 min). Also, no significant (p > 0.05) differences in pH values between samples were observed. Therefore, these results suggest that the combination of MH treatment and DBD plasma can be potentially utilized in the food industry to effectively inactivate B. cereus without incurring quality deterioration of red pepper powder.

Sign in / Sign up

Export Citation Format

Share Document