scholarly journals Evaluation of fertilization of hydroponically cultivated castor bean (Ricinus communis L.)

2021 ◽  
Vol 14 (05) ◽  
Author(s):  
Adrián Gómez Gonzalez ◽  
J.G. Reyes-Contreras ◽  
Eduviges Javier García ◽  
I. Hernández-Ríos ◽  
A. Amante-Orozco ◽  
...  
Keyword(s):  
Castor Bean ◽  
Design Methodology ◽  
Oil Content ◽  
Ricinus Communis ◽  
Growth And Yield ◽  
Average Height ◽  
Grain Production ◽  
Hydroponic System ◽  
San Luis ◽  
Ricinus Communis L

Objective: To determine the influence of fertilization on the growth and yield of five accessions of castor bean (Ricinus communis L.) cultivated in a hydroponic system. Design/Methodology/Approach: Five outstanding accessions of the castor bean collection at COLPOS-Campus SLP were established: El Orito (EO), Encarnación de Díaz (ED), Salinas (SA), Ranchería de Guadalupe (RG) and San Luis (SL). The NPK (ppm) fertilization levels tested were: low (LL; 140, 50, 150), medium (ML; 210, 80, 250); high (HL; 280, 110, 350) and a control (NF; No fertilizer). The experimental design was a randomized blocks, with a 5x4 factorial arrangement (accession x fertilizer level). Results: The differences in grain production were only significant (?=0.05) between the NF control (31 g plant-1) and the three levels of fertilization (1103, 973 and 967 g plant-1, for LL, ML, and HL, respectively, with no differences among them). Regarding accessions, no differences were observed among them, having ED the highest yield (681 g plant-1). In the case of plant height, NF treatment reached 60 cm, while the other levels had an average height of 170 cm, with HL being the highest (180 cm). The highest oil content (38.4%) was obtained with the ML fertilization. Study Limitations/Implications: The present study had no obvious limitations. Findings/Conclusions: For seed yield, significant differences were found only between not fertilizing and fertilizing at any level. Between fertilized levels, however, the differences were not significant, as well as among accessions.

scholarly journals Hybridization of Castor Bean (Ricinus communis L.) in Morelos, México

2021 ◽  
Vol 14 (4) ◽  
Author(s):  
Jaime Canul Ku ◽  
Edwin J. Barrios-Gómez ◽  
Eleodoro Hernández-Meneses ◽  
Sandra E. Rangel-Estrada
Keyword(s):  
Hydrogen Peroxide ◽  
Relative Humidity ◽  
Castor Bean ◽  
Design Methodology ◽  
Ricinus Communis ◽  
Pollen Viability ◽  
Male Parent ◽  
Stigma Receptivity ◽  
Viable Pollen ◽  
Ricinus Communis L

Objective: To determine the stigma receptivity and the pollen viability in order to make manual crosses and obtain viable progeny in castor bean (Ricinus communis L.).Design/Methodology/Approach: Pollen viability tests were made on breeding materials by staining with acetocarmine solution. In elite materials, the receptivity of the stigma was evaluated with hydrogen peroxide. From the inflorescences, the male ones were removed and the female ones were preserved, which were covered with a glassine bag. After six days, they were checked and when they were considered receptive, manual pollinations were carried out between viable pollen materials and receptive stigma. The pollen of the male parent was impregnated in the stigmas and the inflorescence was covered again.Results: The breeding materials exhibited viable pollen since they were stained red. Whereas, the application of hydrogen peroxide to the stigmas of the elite materials showed bubbling, indicative that they were receptive. In 2014, 400 inflorescences were pollinated with 8 flowers on average and a fruit pollinated percentage of 61.21. In 2015, 245 inflorescences with 12 flowers on average and 61.24% of fruit were pollinated.Study Limitations/Implications: Temperature and relative humidity were fundamental factors for the success of castor bean fertilization.Findings/Conclusions: The elite castor bean materials presented receptive stigmas and the improved viable pollen materials. Manual crosses produced fruits and seeds. The fruits pollinated were 61%.

scholarly journals Optimal fertilization dose in castor bean (Ricinus communis L.) using partial budgets analysis

2021 ◽  
Author(s):  
E. Salinas-Cruz ◽  
O. Ruíz-Álvarez ◽  
J. Martínez-Sánchez ◽  
R. Reynoso-Santos ◽  
Pedro Cadena- Íñiguez ◽  
...  
Keyword(s):  
Castor Bean ◽  
Design Methodology ◽  
Ricinus Communis ◽  
Variable Cost ◽  
Costs And Benefits ◽  
Production Factors ◽  
Ricinus Communis L ◽  
Morphological Variables ◽  
Net Benefits ◽  
A Site

Objective: To determine the economically adequate fertilization dose for a castor bean (Ricinus communis L.) crop that improves the producer's benefits using the partial budgeting technique. Design / methodology / approach: The experiment was established at a site located 500 m from the Centro de Chiapas experimental field, with an altitude of 800 m. Two production factors were studied: nitrogen (40, 60, and 80) and phosphorus (20, 40, and 60) with three levels each. The treatments had nine combinations in a randomized complete block experimental design and four replications. Phenological and morphological variables, seed yield, and variable costs economic components were evaluated as a response. Results: With the average yields the obtained net benefits were determined; an adjustment of the benefits was made, and its dominance was determined. Four experiments were dominated, and five showed favorable profits for the producer. The 80-60-00 formulation had a return rate (RR) of 23 %. Conclusions: The 40-20-00, 40-40-00, 40-60-00, 80-40-00 and 80-60-00 formulations were dominant. The 80-60-00 formulation reported the highest RR, an increase in variable cost of US$9.64, like other doses of lower costs and benefits. For this dose, the net benefits increase was us$ 222.61.

scholarly journals EVALUATION OF IRRIGATION LEVELS IN THE CASTOR BEAN (Ricinus communis L.) IN THE BRAZILIAN SEMIARID REGION

2013 ◽  
Vol 21 (5) ◽  
pp. 493-500
Author(s):  
Breno Rosa Neves ◽  
Marcelo Rocha Santos ◽  
Sérgio Luiz Rodrigues Donato
Keyword(s):  
Castor Bean ◽  
Agricultural Sector ◽  
Ricinus Communis ◽  
Raw Material ◽  
Growth And Yield ◽  
Semiarid Region ◽  
Federal Institute ◽  
Randomized Design ◽  
Ricinus Communis L ◽  
Irrigation Levels

There has been an increase in the search for forms of renewable energy with lo environmental impacts, of which biodiesel is highlighted. The castor bean (Ricinus communis L.) is a major raw material for the derivation of these biomass-based fuels. Due to the lack of information in literature regarding irrigation in castor bean crops in the semiarid region of Bahia, the aim of this study was to evaluate different irrigation levels on growth and yield of castor beans in the semiarid region of Bahia. The study was conducted in an experimental area of the agricultural sector of the Federal Institute of Education, Science and Technology Campus, Guanambi, Bahia, Brazil. The experiment was setup in a completely randomized design with 4x5 factorial scheme, consisting of four irrigation levels (T1: 100% ETc, T2: 80% of ETc, T3: 60% of ETc and T4: 40% of ETc, with drip irrigation), five evaluation dates (65, 80, 95, 110 and 126 day after sowing) and four replications. The reduction in irrigation did not cause differences in plant height, stem diameter and crown diameter of the castor bean cultivar Paraguaçu. Irrigation at 80% ETc showed to be more suitable, with increased yield and water use efficiency.

Evaluation of Genetic Diversity in Castor (Ricinus communis L.) using RAPD Markes

2011 ◽  
Vol 343-344 ◽  
pp. 981-987
Author(s):  
Feng Juan Li ◽  
Chang Lu Wang ◽  
Dong He ◽  
Ya Qiong Liu ◽  
Mian Hua Chen ◽  
...  
Keyword(s):  
Genetic Diversity ◽  
Phylogenetic Tree ◽  
Genetic Distance ◽  
Oil Content ◽  
Rapd Markers ◽  
Rapd Analysis ◽  
Ricinus Communis ◽  
Major Group ◽  
Ricinus Communis L ◽  
Polymorphic Bands

RAPD markers are used to study the genetic diversity of the main planting on 37 castor varieties widely cultivated in china according to the oil content and other characteristic of different castor varieties. Genetic distance of 37 Chinese castor varieties is studied by RAPD markers analysis. RAPD analysis shows that a total of 122 bands are amplified from random primers of 20 S series, including 71 polymorphic bands with polymorphic rate of 58.20%. 37 castor beans are divided into four major groups in the phylogenetic tree. One castor germplasm is included in1, 2, 3 groups respectively, and two sub-groups are included in the 4 major group.

scholarly journals Life history of Neoseiulus californicus (McGregor, 1954) (Acari: Phytoseiidae) fed with castor bean (Ricinus communisL.) pollen in laboratory conditions

2014 ◽  
Vol 74 (3) ◽  
pp. 691-697 ◽  
Author(s):  
PP Marafeli ◽  
PR Reis ◽  
EC. da Silveira ◽  
GC Souza-Pimentel ◽  
MA. de Toledo
Keyword(s):  
Life History ◽  
Castor Bean ◽  
Ricinus Communis ◽  
Intrinsic Rate ◽  
Predatory Mite ◽  
Neoseiulus Californicus ◽  
Intrinsic Rate Of Increase ◽  
Ricinus Communis L ◽  
Rate Of Increase ◽  
History Of

The predatory mite, Neoseiulus californicus(McGregor, 1954) (Acari: Phytoseiidae) is one of the principal natural enemies of tetranychid mites in several countries, promoting efficient control of those mites in several food and ornamental crops. Pest attacks such as that of the spider mite, Tetranychus urticaeKoch, 1836 (Acari: Tetranychidae), is one of the problems faced by farmers, especially in the greenhouse, due to the difficulty of its control with the use of chemicals because of the development of fast resistance making it hard to control it. The objective of this work was to study the life history of the predatory mite N. californicus as a contribution to its mass laboratory rearing, having castor bean plant [Ricinus communis L. (Euphorbiaceae)] pollen as food, for its subsequent use as a natural enemy of T. urticae on a cultivation of greenhouse rosebushes. The studies were carried out in the laboratory, at 25 ± 2°C of temperature, 70 ± 10% RH and a 14 hour photophase. The biological aspects and the fertility life table were appraised. Longevity of 32.9 days was verified for adult females and 40.4 days for males. The intrinsic rate of increase (rm) was 0.2 and the mean generation time (T) was 17.2 days. The population doubled every 4.1 days. The results obtained were similar to those in which the predatory mite N. californicus fed on T. urticae.

scholarly journals Efecto de Corythucha gossypii sobre las hojas de higuerilla: criterios para su muestreo y control con insecticidas

2010 ◽  
Vol 11 (1) ◽  
pp. 41 ◽  
Author(s):  
Edgar Herney Varón ◽  
Márcio Dionizio Moreira ◽  
Jenny Paola Corredor
Keyword(s):  
Castor Bean ◽  
Ricinus Communis ◽  
Insect Pest ◽  
Lower Surface ◽  
Insecticide Application ◽  
Lace Bug ◽  
Life Period ◽  
Ricinus Communis L ◽  
Oil Plant ◽  
And Control

<p>El chinche de encaje, Corythucha gossypii (Fabricius) (Hemiptera: Tingidae), es un insecto plaga del algodón, pero ha sido reportado en más de veinticuatro hospederos, incluyendo higuerilla (Ricinus communis L). El objetivo de este trabajo fue evaluar si esta plaga disminuye el periodo de vida útil de las hojas, establecer la superficie de muestreo de la hoja que mejor representa las poblaciones de esta plaga y la eficacia de seis insecticidas para su control en higuerilla. La vida útil de las hojas fue negativamente influenciada por la presencia del insecto plaga; a mayor número inicial de insectos, menor fue el tiempo para la pérdida de hojas. La superficie del envés fue la que mejor representó la población de C. gossypii con un promedio ± Error Standard (ES) de 55,10 ± 4,76 de individuos y una correlación con la población total de 99,60%, R2 =0,99 y p &lt; 0,0001; comparado con 3,44 ± 0,57 individuos y una correlación de 66,32%; R2=0,44 y p &lt; 0,0001 para la superficie del haz. El orden de eficacia de control para 3 días después de la aplicación de los tratamientos fue tiametoxam + lambdacihalotrina (0,00%), spinetoram, (0,00%), malation (20,35%), tiametoxam (38,62%), dimetoato (86,94%) e imidacloprid (87,33%); para 7 días fue tiametoxam + lambdacihalotrina (0,00%), spinetoram (21,46%), malation (38,77), tiametoxam (50,84%), dimetoato (86,14%) e imidacloprid (90,37%). Los datos de muestreo, a partir de 16 días, presentaron una gran pérdida de unidades experimentales, lo que imposibilitó el análisis de los resultados, después de ese tiempo.</p><p> </p><p><strong>Effect of Corythucha gossypii on Castor Oil Plant Leaves: Sampling Criteria and Control by Insecticides</strong></p><p>The lace bug, also called the “cotton or bean lace bug”, Corythucha gossypii (Fabricius) (Hemiptera: Tingidae) is a common pest from cotton. However it has been reported in another twenty four plant hosts including castor bean (Ricinus communis L.). This work aimed to establish if this insect pest can reduce the life-period of leaves, to assess which is the leaf surface that best represents the total pest population for sampling and to test the efficacy of six insecticides for C. gossypii control in a castor bean crop. The life-period of leaves was negatively affected by the presence of the insect, the larger the number of C. gossypii, the shorter their leaf life. The lower surface best represented the entire population of lace bug with a mean ± standard error of 55.10 ± 4.76, with a 99.60% of correlation, a R2=0.99 and a p &lt; 0.0001; compared to 3.44 ± 0.57, with a 66.32% of correlation, a R2=0.44 and a p &lt; 0.0001 for the upper surface. Efficacy of control after three days of insecticide application was: thiamethoxam + lambdacyhalothrin (0.00%), spinetoram, (0.00%), malathion (20.35%), thiamethoxam (38.62%), dimethoate (86.94%) and imidacloprid (87.33%). After seven days of insecticide application the efficacy was thiamethoxam + lambdacyhalothrin (0.00%), spinetoram (21.46%), malathion (38.77), thiamethoxam (50.84%), dimethoate (86.14%) and imidacloprid (90.37%). Results obtained after 16 days lacked many sampling unit leaves, which made their analysis meaningless, after that period of time. </p>

Sign in / Sign up

Export Citation Format

Share Document