scholarly journals Evaluation of the diffusion gradient in thin-films (DGT) technique for measuring trace metal concentrations in freshwaters

Author(s):  
Deborah Lynn Parent

The recently developed Diffusion Gradient in Thin-films (DGT) technique is based on a simple device that accumulates metals in situ, over time in a Na resin gel. Metal ions diffuse through a hydrogel membrane and are rapidly bound by the resin. The many advantages associated with the DGT technique (simplicity, in situ technique, low detection limits, and ability to measure many metals) have lead to its rapid application in aquatic environments. Caveats have been recognized with the DGT technique when it is used in aquatic environments. These include: the ability of strongly complexed organic-metal molecules to diffuse through the hydrogel and become complexed by the resin gel, and in freshwater lakes with a low concentration of cations (Σ [cations] ≤ 2 × 10 -4 M), it is hypothesized that the diffusion coefficient of metal ions entering the DGT device increases. Both of these caveats overestimate the concentrations of labile inorganic metals in the deployment solution. The hypothesis that deploying DGT devices equipped with two different hydrogel formulations ("open" and "tight") will provide reasonable measurements of DGT-labile "organic" and "inorganic" concentrations of Mn, Cd and Pb was tested in the field. DGT devices were deployed in three lakes (Lake Tantare, Lake 8t. Joseph and Lake Memphremagog). To compare the responses of the DGT devices with the total dissolved metal concentration (< 0.20 um) of each lake, in situ dialysis samplers were deployed simultaneously. Overestimation of DGT-labile "inorganic" concentrations of Mn and Pb, and overestimation of DGT-labile "organic" Cd was observed when compared to the measured total dissolved metal concentrations in the lakes. The hypothesis that DGT devices equipped with a Ca form of the resin gel (as an alternative to the sodium based resin gel in the DGT device) will reasonably measure Mn, Cd and Pb labile metal concentrations in freshwater lakes with low cation concentrations was tested. DGT devices with the Ca form of the resin gel were deployed in Lake Tantare, Lake 8t. Joseph and Lake Memphremagog. Overestimation of DGT-labile metal concentrations of Mn, Cd and Pb were observed with the Ca resin gel in the lakes when compared to the measured total dissolved concentrations. The implication of these findings is that the DGT technique should not be used in freshwaters with low cation concentrations (Σ [cations] ≤ 2 × 10 -4 M), typical of lakes found in the Canadian environment, until the caveats of the technique have been resolved. Extreme caution should be used when drawing conclusions regarding the concentrations of inorganic and organic metal species, since it has been found the DGT devices with the two different hydrogel formulations overestimate the inorganic metal concentration relative to the organic metal concentration in aquatic environments.

2019 ◽  
Vol 157 ◽  
pp. 292-300 ◽  
Author(s):  
Delin Zhang ◽  
Yuanting Zhu ◽  
Xianchuan Xie ◽  
Chao Han ◽  
Hao Zhang ◽  
...  

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Marin Senila ◽  
Erika Andrea Levei ◽  
Lacrimioara Ramona Senila ◽  
Marius Roman

The paper presents the metals content and bioavailability in waters of Aries River catchment, Romania. Concentration of labile dissolved metal species measured by diffusive gradients in thin films technique (DGT), metals in colloidal and in particulate phases, and also general physical-chemical indicators of water were determined. Very high total metal concentrations were found in the tributaries that drain the mining areas. However, the influence of the polluted tributaries on the Aries River water quality was moderate, as a consequence of the tributaries low flow rate compared with that of the Aries River. Using the DGT technique the bioavailable metals fractions expressed as % of total dissolved metals concentrations were found to be 28–88% for Cu, 43–72% for Zn, 73–85% for Fe, and 33–70% for Mn. Depending on the used method for dissolved metals determination the classification of waters according to quality classes may differ. Excluding the colloidal metal fractions, DGT measures only truly dissolved metal concentrations. In cases with very high metal contamination the differences between total dissolved and DGT-labile concentrations are unimportant for waters classification. However, where the metals concentration is near the thresholds values the determination method is very important.


Carbon ◽  
2010 ◽  
Vol 48 (15) ◽  
pp. 4230-4237 ◽  
Author(s):  
Pandiyan Murugaraj ◽  
David Mainwaring ◽  
Nurra Ali Khelil ◽  
Ju Lin Peng ◽  
Rainer Siegele ◽  
...  

Author(s):  
Dudley M. Sherman ◽  
Thos. E. Hutchinson

The in situ electron microscope technique has been shown to be a powerful method for investigating the nucleation and growth of thin films formed by vacuum vapor deposition. The nucleation and early stages of growth of metal deposits formed by ion beam sputter-deposition are now being studied by the in situ technique.A duoplasmatron ion source and lens assembly has been attached to one side of the universal chamber of an RCA EMU-4 microscope and a sputtering target inserted into the chamber from the opposite side. The material to be deposited, in disc form, is bonded to the end of an electrically isolated copper rod that has provisions for target water cooling. The ion beam is normal to the microscope electron beam and the target is placed adjacent to the electron beam above the specimen hot stage, as shown in Figure 1.


Author(s):  
J. T. Sizemore ◽  
D. G. Schlom ◽  
Z. J. Chen ◽  
J. N. Eckstein ◽  
I. Bozovic ◽  
...  

Investigators observe large critical currents for superconducting thin films deposited epitaxially on single crystal substrates. The orientation of these films is often characterized by specifying the unit cell axis that is perpendicular to the substrate. This omits specifying the orientation of the other unit cell axes and grain boundary angles between grains of the thin film. Misorientation between grains of YBa2Cu3O7−δ decreases the critical current, even in those films that are c axis oriented. We presume that these results are similar for bismuth based superconductors and report the epitaxial orientations and textures observed in such films.Thin films of nominally Bi2Sr2CaCu2Ox were deposited on MgO using molecular beam epitaxy (MBE). These films were in situ grown (during growth oxygen was incorporated and the films were not oxygen post-annealed) and shuttering was used to encourage c axis growth. Other papers report the details of the synthesis procedure. The films were characterized using x-ray diffraction (XRD) and transmission electron microscopy (TEM).


Author(s):  
K. Barmak

Generally, processing of thin films involves several annealing steps in addition to the deposition step. During the annealing steps, diffusion, transformations and reactions take place. In this paper, examples of the use of TEM and AEM for ex situ and in situ studies of reactions and phase transformations in thin films will be presented.The ex situ studies were carried out on Nb/Al multilayer thin films annealed to different stages of reaction. Figure 1 shows a multilayer with dNb = 383 and dAl = 117 nm annealed at 750°C for 4 hours. As can be seen in the micrograph, there are four phases, Nb/Nb3-xAl/Nb2-xAl/NbAl3, present in the film at this stage of the reaction. The composition of each of the four regions marked 1-4 was obtained by EDX analysis. The absolute concentration in each region could not be determined due to the lack of thickness and geometry parameters that were required to make the necessary absorption and fluorescence corrections.


1999 ◽  
Vol 09 (PR8) ◽  
pp. Pr8-643-Pr8-650 ◽  
Author(s):  
M. Amjoud ◽  
F. Maury
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document