scholarly journals Simulation of industrial solar photovoltaic station with transformerless converter system

2020 ◽  
pp. 73-79
Author(s):  
D. V Tugay ◽  
S. I Korneliuk ◽  
O. O Shkurpela ◽  
V. S Akimov
Keyword(s):  
Power Systems ◽  
Thermal Characteristics ◽  
Maximum Power ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Systems Methodology ◽  
Detailed Model ◽  
Power Extraction ◽  
Solar Radiation Intensity ◽  
Multi Level

Purpose. Creation of a detailed model of a solar photovoltaic station with a converter system based on a cascaded multi-level inverter with the MPPT (maximum power point tracker) function to investigate its operating modes in distributed power systems. Methodology. To carry out the research, the paper used the methods of system synthesis, mathematical and computer modeling to create photovoltaic station models and components; a physical experiment in obtaining thermal characteristics of the photovoltaic module Solarday SDM72360 W; modern power theories for synthesis of the vector control system of a multi-level inverter. Findings. the Matlab-model of solar photovoltaic station with transformerless 29-level cascade voltage inverter is synthesized. The model confirmed the serviceability and efficiency of the converter system and the power plant as a whole. An algorithm is proposed and an MPP tracker with volt-ampere characteristics of the photovoltaic module, which corresponds to the maximum power extraction, is synthesized on the basis of the algorithm. The algorithm was validated by the model for any solar radiation intensity. Originality. The total mathematical model of the photoelectric module, which accounts for its energy and heat characteristics, is obtained and can be used for simulating the operation of any computer model of the photoelectric converter under Matlab/Simulink/SimPowerSystems environment. Practical value. The model results indicate the prospects of industrial implementation of transformerless multi-level converter systems to be used in the structure of powerful solar photovoltaic stations.

scholarly journals Mathematical Modeling of Solar Photovoltaic Module to generate Maximum Power Using Matlab/Simulink

2021 ◽  
Vol 2 (1) ◽  
pp. 1-11
Author(s):  
Amusat Ramoni Olawale ◽  
Sulaimon Shodiya ◽  
Yakubu H Ngadda
Keyword(s):  
System Simulation ◽  
Real Life ◽  
Maximum Power ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Basic Tool ◽  
Pv Module ◽  
Accurate Design ◽  
Proposed Model ◽  
Module Type

Modeling is a basic tool of the real system simulation in translating the Mathematical results into real life. In this study, the Modeling and simulation of photovoltaic Module type PS-P310-36 were developed, and maximum power was obtained. The output I – V and P – V curves of the model were studied and analyzed under different irradiance (200 W/m2, 400 W/m, 600 W/m2, 800 W/m, and 1000 W/m2) at a constant temperature of 25oC. The model attained maximum power of 308, 251.6, 191.4, 129.2, and 64.74 W at 1000, 800, 600, 400, and 200 W/m2 irradiance, respectively. The model results agreed with the characteristics curves of the PV module of previous similar PV studies. The proposed model will serve as quick tools for designers in obtaining the maximum power of PV at distinct irradiance. However, for a more accurate design, more information is needed.

scholarly journals Performance Analysis of Solar Photovoltaic Module using Buck Boost Converter and Zeta Converter

2020 ◽  
Vol 9 (3) ◽  
pp. 3431-3435
Keyword(s):  
Output Voltage ◽  
Boost Converter ◽  
Maximum Power ◽  
Photovoltaic Module ◽  
Resistive Load ◽  
Solar Photovoltaic ◽  
Voltage Gain ◽  
Solar Pv ◽  
Point Tracking ◽  
Current Ripple

This paper compares the performance of buck-boost and zeta converter fed solar photovoltaic module. The study is carried out by considering a solar pv module, dc-dc converter, MPPT controller and a resistive load. The voltage gain, output voltage ripple and output current ripple of the two converters were compared. Maximum Power Point tracking is implemented and and ensures the extraction of maximum power from the solar panel. Here MPPT is achieved by using perturbation and observation method. Zeta converter topology provides a non inverted output voltage with increased voltage gain. Output has lesser voltage and current ripple compared to buck-boost converter. Photovoltaic module with Buck-Boost and Zeta converter are simulated using MATAB Simulink software and the result are shown.

scholarly journals A SIMSCAPE based design of a dual maximum power point tracker of a stand-alone photovoltaic system

2020 ◽  
Vol 10 (3) ◽  
pp. 2912
Author(s):  
Mohammed S. Ibbini ◽  
Abdullah H. Adawi
Keyword(s):  
High Efficiency ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Global Maximum ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Maximum Power Point Tracker ◽  
Power Point

This paper presents the simulation of a dual maximum power point tracker (dual-MPPT) and attempt to get the global maximum power point GMPP under partial shading conditions for a solar photovoltaic module using MATLAB SIMSCAPE. Traditional single MPP trackers are less efficient than dual MPP trackers and have greater sensitivity to partial shading. By using dual MPP trackers, one can get several features such as the possibility of connecting two arrays with different string sizes or different solar azimuths or tilts within high efficiency. This paper focuses on making the photovoltaic system work at maximum possible power under partial shading condition by using dual MPP trackers to achieve the convergence toward the global maximum power point GMPP.

scholarly journals Optimization of the maximum power point of photovoltaic working under partial shading conditions

2020 ◽  
Vol 3 (1) ◽  
pp. First
Author(s):  
Bui Van Hien ◽  
Viet Anh Truong ◽  
Quach Thanh Hai
Keyword(s):  
Solar Radiation ◽  
Operating Conditions ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Photovoltaic Module ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Point Tracking ◽  
Solar Radiation Intensity ◽  
Power Point

Photovoltaic is used to convert electricity from solar radiation. The working characteristics of photovoltaic depend on environmental conditions such as temperature, solar radiation intensity, and the surrounding environment. During operation, the photovoltaic generation system (PGS) can be partially or completely shaded due to natural phenomena such as clouds, buildings, dust, animals, electric pillars, trees ... these are changing the characteristics of the system’s power output of PV. This paper proposes a maximum power point tracking algorithm for PGS operating under partially shaded condition (PSC) based on Particle Swarm Optimization (PSO) method, and a configuration comprises of three PV modules type PHM60W36 is used to simulate using PSIM software. The study focused on changing the working characteristics of the photovoltaic system when changing factors such as level, location of the photovoltaic module are shaded. The effectiveness of the proposed method is not only compared with the traditional Perturb and Observe (P&O) method but also compared with those proposed previously under the same operating conditions. In addition, an experimental model was developed to investigate the response of the proposed solution in the real environment with the Chroma-62050H simulator. The results show the superiority of the proposed solution in improving the performance MPPT and convergence speed of the system under complex operating conditions.

scholarly journals OPTIMISATION OF SOLAR PHOTOVOLTAIC SYSTEM EMPLOYING DISTRIBUTED MPPT CONTROL

2021 ◽  
Vol 9 (07) ◽  
pp. 130-139
Author(s):  
Akash Kumar Singh ◽  
◽  
A.K. Pandey ◽  
Keyword(s):  
Solar Energy ◽  
Interface Design ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Pv System ◽  
Power Extraction ◽  
Simulink Model ◽  
Energy Conversion Systems ◽  
Solar Photovoltaic System

This paper presents simulation and modeling with optimization and analysis in solar photovoltaic systems, as well as the role and potential of maximum power extraction with controller. Matrix calculations for grid inverters with data graphing, their functions, MPPT algorithm applications, user interface design for monitoring PV modules, and interaction with inverter and converter are all aided by simulations of renewable energy systems. It looks at how well they work on a single-phase grid with a PV system. Simulink model for solar energy conversion systems allows you to examine the performance of Photovoltaic cells, modules, arrays, Maximum Power Points and inverters. Controllers are being tracked when the environment and physical variables change. A distributed MPPT scheme, which allows adjustment of each DC-link voltage, may be adopted for PV systems to achieve maximum PV module usage and solar energy extraction. The pattern that has been developed allows for independent management of each DC-link voltage in order to track the MPP for each string of PV panels. For various operating circumstances, simulation results are provided.

scholarly journals Comparison of Interleaved Boost Converter Configurations for Solar Photovoltaic System Interface

2013 ◽  
Vol 10 (2) ◽  
pp. 87 ◽  
Author(s):  
R Ramaprabha ◽  
K Balaji ◽  
SB Raj ◽  
VD Logeshwaran
Keyword(s):  
High Frequency ◽  
Photovoltaic Effect ◽  
Frequency Converter ◽  
Internal Resistance ◽  
Boost Converter ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Power Extraction ◽  
Interleaved Boost Converter

 Solar photovoltaic (SPV) panels that convert light energy into electrical energy through the photovoltaic effect have nonlinear internal resistance. Hence, with the variation in the intensity of light falling on the panel, the internal resistance varies. For effective utilization of the SPV panel, it is necessary to extract the maximum power from it. For maximum power extraction from SPV panels, DC-DC converter interface is used. The problem in using high frequency converter interface is the resultant high frequency ripple interaction with the SPV system. In this work, an interleaved boost converter (IBC) is considered to reduce the ripple. Our finding is that IBC fed by a SPV panel reduces this ripple to a greater extent. IBC also has a faster transient response as compared to conventional boost converters with reduced ripple contents. The main aim of this paper is to present a comparative analysis of the performance of IBC with inductors that are coupled in different ways. The results of the simulation were extrapolated with the help of MATLAB software and verified through experimentation. 

Sign in / Sign up

Export Citation Format

Share Document