scholarly journals Effects of nitrogen on yield and chlorophyll of potato (Solanum tuberosum L.) cultivars

1970 ◽  
Vol 38 (2) ◽  
pp. 163-169 ◽  
Author(s):  
Semiha Güler
Keyword(s):  
Solanum Tuberosum ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Total Yield ◽  
Correlation Coefficients ◽  
Tuber Number ◽  
Tuber Weight ◽  
Nitrogen Rate ◽  
Leaf Chlorophyll ◽  
Nitrogen Rates

Effects of nitrogen on the leaf chlorophyll (chl), yield and yield attributing characters of potato as tuber number and mean tuber weight were studied. Correlation coefficients between the investigated characters were determined. Five nitrogen rates (0, 150, 200, 250 and 300 kg/ha) and four potato cultivars (Burren, Slaney, Anna and Emma) were used in the study. First, second, third class tuber yields and total tuber yield, tuber number per plant, and leaf chl were significantly influenced by both nitrogen rate and cultivar, whereas mean tuber weight was affected only by cultivar. Maximum total yield was obtained at 200 kg N/ha. There was significant linear relationship between leaf chl and N applied (R2=0.91). There were significant correlations between chl and yield and yield related characters. Total yield significantly correlated with leaf chl. Correlations between first class yield and total yield as well as total yield and tuber number per plant were highly significant.   Key words: Potato; Solanum tuberosum L.; Leaf chlorophyll; Nitrogen; Yield DOI: 10.3329/bjb.v38i2.5141 Bangladesh J. Bot. 38(2): 163-169, 2009 (December)  

scholarly journals The effects of flower removal and earthing up on tuber yield and quality of potato (Solanum tuberosum L.)

2021 ◽  
Vol 66 (2) ◽  
pp. 121-137
Author(s):  
Fitsum Gebregwergis ◽  
Mehari Gebremicheal ◽  
Hailay Gebremedhin ◽  
Abraha Asefa
Keyword(s):  
Solanum Tuberosum ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Matter Content ◽  
Tuber Number ◽  
Dry Matter Content ◽  
Tuber Weight ◽  
Yield And Quality

A field experiment was conducted in Eastern Tigray, Ethiopia, during the summer season to determine the effects of flower removal and earthing up time on the tuber yield and quality of potato (Solanum tuberosum L.). The experiment comprised three flower removal stages and five earthing up time treatments, which were laid out in a randomized complete block design (RCBD) of a 5x3 factorial arrangement with three replications. Data collected on tuber yield and quality parameters were analyzed using SAS version 9.2. The interaction of flower removal stages and earthing up time treatments affected marketable and unmarketable tuber number and yield, total tuber number and yield, large-sized tuber weight, and number of large-sized tubers. The medium and small-sized tubers were also affected by main treatments but not by their interaction treatments. Similarly, dry matter content was significantly (p<0.05) affected by flower removal alone, but not by earthing up time and its interaction with flower removal. Generally, the highest marketable tuber yield (30.25 t ha-1), large-sized tuber weight (424.9 g), the number of large-sized tubers (5), and total tuber yield (30.96 t ha-1) were recorded in the treatment of potato flower removed at the bud stage and earthed up at 15 days after complete emergence. Therefore, the removal of potato flowers at the bud stage and earthing up at 15 days after complete emergence and common cultivation can be practiced for better tuber yield and quality of potato.

scholarly journals Responses of potato (Solanum tuberosum L.) var. Agria to application of bio, bulk and nano-fertilizers

2016 ◽  
Vol 70 (2) ◽  
pp. 57
Author(s):  
Mohsen Janmohammadi ◽  
Naser Sabaghnia ◽  
Mojtaba Nouraein ◽  
Shahyar Dashti
Keyword(s):  
Solanum Tuberosum ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Starch Content ◽  
Block Design ◽  
Matter Content ◽  
Fertilizer Treatment ◽  
Dry Matter Content ◽  
Tuber Weight ◽  
Food And Nutritional Security

<p>Potato (<em>Solanum tuberosum </em>L.), is one of the important crops grown in the world which is important as food and nutritional security option at the global level. The experiment was laid out as randomized complete block design in three replications with six nutrition treatments consisted of control, NPK, Mog bio-fertilizer, Nano-Ca, Nano-Zn+B and Nano-Com. The treatment-by-trait (TT) biplot analysis was applied to data to examine its usefulness in visualizing relationships among trait as well as treatments and showed that the first two principal components accounted 80% of total variation. Tuber yield, mean tuber diameter, mean tuber weight, tuber weight per plant, starch content of initial fresh, number of tubers per plant, number of leaves and dry matter content were in the same sector, with Nano-Com fertilizer treatment as the best treatment. Based on ideal entry biplot, the Nano-Com treatment is closest to the position of an ideal treatment and it is ranked the highest in term of morphological performance. Also, the best fertilizer treatment for obtaining of high tuber yield could be found as Nano-Com treatment following Nano-Zn+B treatment. The studied nanofertilizers showed a good potential compared to the commercial bulk and bio fertilizers.</p>

Response of winter-grown potatoes (Solanum tuberosum L.) to applied and residual phosphorus on a Karrakatta sand

1997 ◽  
Vol 37 (1) ◽  
pp. 131
Author(s):  
M. A. Hegney ◽  
I. R. McPharlin ◽  
R. C. Jeffery
Keyword(s):  
Solanum Tuberosum ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Total Yield ◽  
Maximum Yield ◽  
Dry Weight ◽  
Phosphorus Recovery ◽  
Soil Test ◽  
Residual P ◽  
Soil Test P

Summary. The response of winter-grown potatoes (Solanum tuberosum L. cv. Delaware), as determined by yield, to applied (broadcast) phosphorus (P) (0–480 kg/ha) and to residual P was measured on an acutely P-deficient, newly cleared Karrakatta sand in experiments over 2 years. Tuber yield responded significantly (P<0.001) to level of applied P. Phosphorus at 162 kg/ha was necessary for 99% of maximum total yield, which corresponded to maximum economic yield. For 95% of maximum yield 99 kg/ha was necessary. Phosphorus recovery efficiency by tubers (P uptake by tubers/P applied, both in kg/ha) decreased from 0.14 at 30 kg P/ha to 0.04 at 480 kg P/ha. Bicarbonate-soluble P (soil test P) extracted from the top 15 cm of soil was determined on residual P sites in each experiment to which P was applied (as superphosphate) 9 months earlier at levels from 0 to 800 kg/ha. These soil test P levels were related (R2 = 0.91) to total tuber yield. The soil test P level required for 95% of maximum total yield was 33 g/g and for 99% was 51 µg/g. When tubers were 10 mm long, the total P in petioles of youngest fully expanded leaves which corresponded to 95% of maximum yield was 0.7% (dry weight basis), and for 99% was 0.87%. These results, while based on responses measured at 2 sites only, provide strong evidence that maximum yield of winter-grown potatoes on Karrakatta sands can be achieved with lower levels of P fertiliser than are currently used in commercial practice (125–300 kg P/ha). The results also show that soil testing can be used to improve the P management of potato crops grown on the sandy soils of the Swan coastal plain.

QUACKGRASS COMPETITION EFFECT ON POTATO YIELD

1986 ◽  
Vol 66 (1) ◽  
pp. 185-187 ◽  
Author(s):  
J. A. IVANY
Keyword(s):  
Solanum Tuberosum ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Total Yield ◽  
Potato Yield ◽  
Russet Burbank ◽  
Competition Effect ◽  
Marketable Tuber ◽  
Agropyron Repens

The effect of different periods of quackgrass (Agropyron repens L. Beauv.) competition after crop emergence was studied for potato (Solanum tuberosum L. ’Russet Burbank’). Delaying quackgrass removal for 2 wk after crop emergence reduced small-sized tuber yield, marketable tuber yield and total yield by 6%, 27% and 21%, respectively, averaged over 4 yr. Successively longer delays in quackgrass removal showed progressively greater reductions in yield.Key words: Quackgrass, potato, competition

scholarly journals Comparison of potato (Solanum tuberosum L.) tuber size distribution fitting methods and evaluation of the relationship between soil properties and estimated distribution parameters

2021 ◽  
pp. 1-15
Author(s):  
J. K. Mhango ◽  
W. Hartley ◽  
W. E. Harris ◽  
J. M. Monaghan
Keyword(s):  
Solanum Tuberosum ◽  
Size Distribution ◽  
Solanum Tuberosum L ◽  
Tuber Size ◽  
Regression Coefficients ◽  
Tuber Number ◽  
Tuber Weight ◽  
Relative Likelihood ◽  
Tuber Size Distribution ◽  
The Relationship

Abstract Accurate estimation of tuber size distribution (TSD) parameters in discretely categorized potato (Solanum tuberosum L) yield samples is desirable for estimating modal tuber sizes, which is fundamental to yield prediction. In the current work, systematic yield digs were conducted on five commercial fields (N = 119) to compare the Weibull, Gamma and Gaussian distribution functions for relative-likelihood-based goodness-of-fit to the observed discrete distributions. Parameters were estimated using maximum likelihood estimation (MLE) for the three distributions but were also derived using the percentiles approach for the Weibull distribution to compare accuracy against the MLE approaches. The relationship between TSD and soil nutrient variability was examined using the best-fitting model's parameters. The percentiles approach had lower overall relative likelihood than the MLE approaches across five locations, but had consistently lower Root Mean Square Error in the marketable tuber size range. Negative relationships were observed between the percentile-based shape parameter and the concentrations of Phosphorus and Nitrogen, with significant (non-zero-overlapping 95% confidence interval) regression coefficients for P (−0.74 ± 0.33 for distribution of proportional tuber numbers and −1.3 ± 0.62 for tuber weights). Stem density was negatively associated with the scale and mode of tuber number (regression coefficients −0.98 ± 0.63 and −1.08 ± 0.78 respectively) and tuber weight (regression coefficients −0.99 ± 0.78 and −1.04 ± 0.69 respectively) distributions. Phosphorus is negatively related to the scale of the tuber-number-based distribution while positively associating with the tuber weight distribution. The results suggest that excess P application was associated with the increase in small tubers that did not contribute significant weight to the final yield.

Yield and Yield Components of Six Sweet Potato (Ipomoea batatas) Cultivars I. Contribution of Yield Components to Tuber Yield

1975 ◽  
Vol 11 (1) ◽  
pp. 39-48 ◽  
Author(s):  
S. B. Lowe ◽  
L. A. Wilson
Keyword(s):  
Sweet Potato ◽  
Yield Components ◽  
Ipomoea Batatas ◽  
Tuber Yield ◽  
Total Yield ◽  
Tuber Number ◽  
Tuber Weight ◽  
Marketable Yield ◽  
Yield And Yield Components ◽  
Positive Correlations

SUMMARYTotal yield and yield components (tuber numbers and mean tuber weights) of six local sweet potato cultivars were compared in wet and dry season crops. There were significant negative correlations between tuber number and mean tuber weight in five of the six cultivars, and positive correlations between these yield components and total yield, suggesting that cultivars may be grouped into ‘tuber number-tuber weight’ and ‘tuber weight’ types, as well as a ‘random type’ in which yield is related to neither component. Marketable yield tended to be directly related to both components, and cultivars with lower tuber numbers usually produced a higher percentage of marketable yields. The significance of these findings for sweet potato yield improvement is discussed.

scholarly journals Non-Parametric Stability Analysis of Tuber Yield in Potato (Solanum tuberosum L.) Genotypes

2018 ◽  
Vol 10 (28) ◽  
pp. 50-63
Author(s):  
mina moghaddaszadeh ◽  
Rasool Asghari Zakaria ◽  
Davoud Hassanpanah ◽  
naser zare ◽  
◽  
...  
Keyword(s):  
Solanum Tuberosum ◽  
Stability Analysis ◽  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Parametric Stability ◽  
Non Parametric

scholarly journals Performance of potato (Solanum tuberosum L.) varieties with and without straw-mulch at Shankharapur, Kathmandu, Nepal

2020 ◽  
Vol 3 (2) ◽  
pp. 193-204
Author(s):  
Kalyani Shrestha ◽  
Shrawan Kumar Sah ◽  
Reeti Singh ◽  
Yam Narayan Devkota
Keyword(s):  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Medium Size ◽  
Tuber Weight ◽  
Potato Varieties ◽  
Straw Mulch ◽  
Crop Varieties ◽  
Randomized Complete Block Design ◽  
Benefit Cost

The suitability of crop varieties in a particular location determines the productivity of crops. A field experiment was conducted from February to May 2020 at Shankharapur, Kathmandu, Nepal to evaluate the growth and productivity of potato varieties with and without mulch. Five potato varieties (Cardinal, Janakdev, Khumal Bikas, MS- 42.3, Panauti Local) were evaluated under straw-mulch and no-mulch conditions. The treatments were arranged in two factorial Randomized Complete Block Design (RCBD) with 3 replications. The results revealed that the highest tuber yield was produced by Janakdev (34.29 t ha-1) followed by Panauti Local (29.52 t ha-1). Similarly, straw-mulch gave higher yield (25.9 t ha-1) as compared with no mulch condition (21.73 t ha-1). The higher tuber yield in the Janakdev and Panauti Local was because of higher tuber weight per hill, higher number and weight of medium size (50 -100 g) and oversize (> 100 g) tuber per hill. Similarly, higher yield in straw mulch was due to higher number and weight of tuber per hill. Higher gross return, net return was observed and the benefit cost ratioin varieties Janakdev (4.08) and Panauti Local (3.53) and rice straw mulch (2.88). Therefore, potato varieties Janakdev and Panauti Local with straw mulch are most suitable for Kathmandu like climate for improving productivity and profitability.

Sign in / Sign up

Export Citation Format

Share Document