scholarly journals Adaptation of the single-cone in prepared long oval-shaped canals: a micro-computed tomography study

2021 ◽  
Vol 10 (15) ◽  
pp. e444101523301
Author(s):  
Christianne Velozo ◽  
Hugo Dantas ◽  
Basílio Rodrigues Vieira ◽  
Frederico Barbosa de Sousa ◽  
Victor Felipe Farias do Prado ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Root Canal ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Mean Values ◽  
Root Canals ◽  
Gutta Percha ◽  
Working Length ◽  
Single Cone ◽  
Student’S T

The present study aimed to evaluate adaptation of the single gutta-percha cone on root canal walls prepared with the two systems, the XP-endo Shaper (XPS; FKG Dentaire, La Chaux-de-Fonds, Switzerland) and ProTaper Next systems (PTN; Dentsply Sirona, Ballaigues, Switzerland) by using micro-computed tomography (micro-CT) technology. Twenty long oval-shaped canals in mandibular incisors were scanned by micro-CT (Skyscan 1172; Bruker microCT, Kontich, Belgium). Two groups were divided into (n = 10) according to the canal preparation protocol: XPS group with an extra 45 s of instrumentation and PTN group. A gutta percha cone, with respect to the protocol used for each group (size 40, .04 taper, XPS and size 40, .06 taper, PTN) was adapted to the canal at the working length of all the samples, and all root canals were filled, using the single-cone technique. The mean values for volume of voids and percentage relative to the mentioned space were correspondingly higher in XPS group than they were PTN group, mean values for volume of voids (3.61 mm3 - 1.92 mm3) and for percentage of voids (39.25% - 23.28%), respectively, significant differences were recorded (p < 0.05) between the two groups (XPS and PTN, Student’s-t test for homogenous variances and Mann–Whitney test). The canals prepared with XPS, in the procedure performed with an extra 45 s of instrumentation, showed a higher volume of voids than those prepared with the PTN system, in obturation of the root canal with the single cone technique.

scholarly journals Comparison of Two Techniques for Selection of Master Gutta-Percha Cone Using Micro-Computed Tomography

2013 ◽  
Vol 24 (4) ◽  
pp. 367-370 ◽  
Author(s):  
Joao Manoel Silva-Filho ◽  
Aline Evangelista Souza-Gabriel ◽  
Graziela Bianchi Leoni ◽  
Samuel Henrique Camara De-Bem ◽  
Edson Alfredo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Conventional Technique ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canals ◽  
Gutta Percha ◽  
Working Length ◽  
Significant Difference ◽  
Material Volume

This study used micro-computed tomography (micro-CT) to evaluate the fit of the master gutta-percha cone at time of cone fit, gutta-percha volume in the filling material, and the filling material volume in relation to the canal at the apical limit of the working length. Root canals of 20 maxillary central incisors were prepared with rotary instruments and distributed into two groups (n=10). The gutta-percha cone tip was either plasticized (apical thermal impression technique - ATI) or not (conventional technique - CT), and its apical fit was checked. The apical 1 mm of working length was examined with a micro-CT, canals were filled with gutta-percha and sealer, and new micro-CT scans were obtained. In CT, gutta-percha filled 35.83 ± 15.05% of the canal at cone selection and 38.72 ± 11.64% after filling. In ATI, these values were 23.14 ± 7.74% and 26.98 ± 20.40%, respectively. Gutta-percha volume in the filling material, and filling material volume in relation to the canal were, respectively, 61.28 ± 11.64% and 87.76 ± 9.98% for CT, and 73.00 ± 20.41% and 89.96 ± 9.08% for ATI. No significant difference was found between cone selection and after canal filling, for either CT (p=0.593) or ATI (p=0.4975). The techniques did not differ significantly with respect to gutta-percha volume in the filling material (p=0.132) and filling material volume in relation to the canal (p=0.612). An ideal fit of the master gutta-percha cone at working length was not achieved regardless of the cone selection technique, and the material-filled area was similar for both techniques.

scholarly journals Evaluation of Root Canal Filling with a Bioceramic Sealer Using Micro-Computed Tomography: A Pilot Study

2019 ◽  
Vol 890 ◽  
pp. 275-282
Author(s):  
Isabel Vasconcelos ◽  
Mário Rito Pereira ◽  
António Ginjeira ◽  
Margarida C. Franco ◽  
Pedro Morouço ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Pilot Study ◽  
Root Canal ◽  
Future Research ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Gutta Percha ◽  
Single Cone ◽  
Ah Plus

This pilot study aims to define a protocol for optimizing the micro-computed tomography (micro-CT) settings to evaluate in the future research the root canal filling in oval shaped canals. Thirty distal canals of mandibular molars were used. After preparation of the canals, the roots were randomly divided into five groups. The canals were filled with two types of sealers (Endosequence BC Sealer or AH Plus) and two types of gutta percha (Protaper Next cones and Endosequence BC cones), using thermal obturation in comparison with a single cone obturation technique. Each specimen was scanned three times using a micro-CT device at a resolution of 30,1 μm. The first scan was done for selecting the specimen according the inclusion criteria, the second one post-instrumentation and the last micro-CT scan after obturation the specimens. For the present study, the images were only evaluated with qualitative criteria and the settings for acquisition, reconstruction and analysis of micro-CT images were tested.

scholarly journals Microcomputed Tomographic Assessment of the Single Cone Root Canal Fillings Performed by Undergraduate Student, Postgraduate Student and Specialist Endodontist

2021 ◽  
Vol 10 (5) ◽  
pp. 1080
Author(s):  
Saulius Drukteinis ◽  
Goda Bilvinaite ◽  
Paulius Tusas ◽  
Hagay Shemesh ◽  
Vytaute Peciuliene
Keyword(s):  
Undergraduate Student ◽  
Root Canal ◽  
Postgraduate Student ◽  
Micro Computed Tomography ◽  
Dominant Type ◽  
Significance Level ◽  
Isotropic Resolution ◽  
Root Canals ◽  
Gutta Percha ◽  
Single Cone

The present study evaluated the obturation quality of root canals filled with BioRoot RCS sealer and single gutta-percha point by undergraduate student (US), postgraduate student (PS) and endodontist (ED). Twenty-one plastic models of upper premolars were enlarged with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into three groups (7 teeth/14 canals per group): US, PS and ED. After the obturation of root canals with BioRoot RCS and one HyFlex EDM size 40 gutta-percha point, plastic models were scanned using micro-computed tomography scanner (µCT) SkyScan 1272 at isotropic resolution of 10 µm. The porosity distribution was evaluated separately for the apical, middle and coronal thirds. The Kruskal–Wallis, Mann–Whitney, Friedman and Wilcoxon tests with the significance level set at 5% were used for data analysis. The µCT evaluation revealed open pores being the dominant type of porosity in all experimental groups and root canal thirds, with the highest percentage of pores in the apical third of root canal fillings. The quality and homogeneity of single cone root canals fillings remained similar between the groups in the apical and middle thirds (p > 0.05). Significant differences were observed only in the coronal third (p < 0.05).

scholarly journals Quantitative Analysis of the Anatomy of Mesial Roots of Mandibular First Molars with Vertucci Type I Root Canal Configuration by Means of Micro-Computed Tomography

2020 ◽  
Vol 10 (1) ◽  
pp. 17-21
Author(s):  
Ali Keleş ◽  
Cangül Keskin
Keyword(s):  
Computed Tomography ◽  
Quantitative Analysis ◽  
Root Canal ◽  
Visual Analysis ◽  
Descriptive Analysis ◽  
Type I ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Cross Sectional ◽  
Root Canals

Aim:  This study aimed to evaluate root canal morphology of Vertucci type I root canal configuration detected in mesial roots of mandibular first molar teeth using micro-computed tomography (Micro-CT). Methodology: Micro-CT datasets of 269 specimens were evaluated for the detection of specimens with Vertucci type I root canal configuration for further analysis. Major and minor diameter, area, perimeter and roundness of root canal cross-sections at the beginning and midline of each root thirds were measured and recorded. The presence of apical delta, accessory canals, and deviation of major apical foramen from anatomical apex were investigated. Data was analyzed using descriptive analysis, ANOVA-Tukey and Kruskal-Wallis H-Wilcoxon signed-rank tests. Results: Vertucci type I canal configuration was present in the 4.46% of the specimens. The specimens often showed accessory root canals (50%) and apical deltas (41,6%). From the visual analysis of the 3D and 2D images, significant differences were detected among coronal, middle and apical thirds of the specimens regarding major and minor diameter, area, perimeter and roundness (P < 0.05). Conclusion: Three- and two-dimensional analyses of mesial roots with Vertucci type I canal configuration indicated that this type of configuration presents large buccolingual diameters with long oval shape and has isthmus at coronal and middle thirds. At the apical third the root canals often terminate in an oval cross sectional shape.   How to cite this article: Keles A, Keskin C. Quantitative analysis of the anatomy of mesial roots of mandibular first molars with Vertucci type I root canal configuration by means of micro-computed tomography. Int Dent Res 2020;10(1):17-21. https://doi.org/10.5577/intdentres.2020.vol10.no1.4   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Effectiveness of different rotary file systems in removing the root canal filling material: A micro-computed tomography study

2021 ◽  
Vol 15 (4) ◽  
pp. 273-278
Author(s):  
Esin Özlek ◽  
Hüseyin Gündüz
Keyword(s):  
Computed Tomography ◽  
Root Canal ◽  
File System ◽  
File Systems ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Root Canals ◽  
Time Required

Background. This study aimed to examine the retreatment efficiency of four NiTi rotary file systems with micro-computed tomography (micro-CT). Methods. Forty premolar teeth were shaped up to F2 using the ProTaper Universal rotary file system and obturated with MTA Fillapex. The root canals were scanned with micro-CT to evaluate the volume of root canal filling before retreatment. The samples were randomly divided into four groups according to the file system used to remove root canal filling material (n=10): ProTaper Universal Retreatment, ProTaper NEXT, EdgeFile XR, and EdgeFile® X3 NiTi system. All the samples were scanned with a micro-CT device for the second time to evaluate the amount of residual filling material in the root canals. The percentages of filling material removed from root canals were calculated. Additionally, the time spent on the removal of the root canal filling material was recorded. The data were analyzed using the Shapiro-Wilk and Kruskal-Wallis tests. Results. There were no significant differences between the groups in the percentage of root canal filling material removal. However, a statistically significant difference was found between the groups in the time required to reach the apex and remove the entire filling material. The time required to remove the root canal filling material was higher in the EdgeFile® X3 group. Conclusion. NiTi files manufactured for root canal preparation can be used effectively and safely to remove root canal filling materials. EdgeFile XR produced for retreatment can be used as an alternative to ProTaper Universal Retreatment files.

scholarly journals Porosity Distribution in Single Cone Root Canal Fillings Performed by Operators with Different Clinical Experience: A microCT Assessment

2021 ◽  
Vol 10 (12) ◽  
pp. 2569
Author(s):  
Saulius Drukteinis ◽  
Goda Bilvinaite ◽  
Paulius Tusas ◽  
Hagay Shemesh ◽  
Vytaute Peciuliene
Keyword(s):  
Root Canal ◽  
Micro Computed Tomography ◽  
Porosity Distribution ◽  
Significance Level ◽  
Root Canals ◽  
Gutta Percha ◽  
General Dental Practitioner ◽  
Single Cone ◽  
Maxillary Premolars ◽  
Computed Tomography Scanner

The objective of this study was to assess the porosity distribution of BioRoot RCS/single gutta-percha point root-canal fillings performed by a general dental practitioner and endodontist. Fourteen plastic models of maxillary premolars with two roots were selected and shaped with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into two experimental groups. A total of 14 canals in each group were obturated by two different operators with one HyFlex EDM size 40 gutta-percha point and BioRoot RCS sealer. The specimens were scanned with a high-resolution micro-computed tomography scanner, and the porosity of the fillings at the coronal, middle, and apical thirds of the root canals was qualified and quantified. The differences between groups and root-canal thirds were compared using Mann–Whitney, Friedman, and Wilcoxon tests with the significance level set at p < 0.05. The highest number of pores was observed in the apical third of root-canal fillings in both groups; however, the porosity distribution between the two groups was not significantly different in the apical and middle thirds (p > 0.05). Statistically significant differences were determined only in the coronal third (p < 0.05). The predominance of open pores was detected in all root-canal thirds and groups, with no significant differences in the number of open pores between the coronal and middle thirds (p > 0.05).

scholarly journals Micro-Computed Tomography (Micro-CT) Evaluation of Effects of Different Rotary Glide Path Techniques on Canal Transportation and Centering in Curved Root Canals

2019 ◽  
Vol 25 ◽  
pp. 6351-6358
Author(s):  
Gabrielė Česaitienė ◽  
Tadas Venskutonis ◽  
Vita Mačiulskienė ◽  
Vaidotas Cicėnas ◽  
Vykintas Samaitis ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canals ◽  
Glide Path ◽  
Ct Evaluation ◽  
Canal Transportation ◽  
Curved Root Canals

Microbial Leakage of Cavit, IRM, and Temp Bond in Post-prepared Root Canals Using Two Methods of Gutta-percha Removal: An In Vitro Study

2005 ◽  
Vol 6 (3) ◽  
pp. 53-61 ◽  
Author(s):  
Hanan Balto ◽  
Saad Al-Nazhan ◽  
Khulood Al-Mansour ◽  
Moneera Al-Otaibi ◽  
Yunus Siddiqu
Keyword(s):  
Root Canal ◽  
Bacterial Suspension ◽  
Control Group ◽  
Endodontically Treated Teeth ◽  
Root Canals ◽  
Gutta Percha ◽  
Working Length ◽  
Significant Difference ◽  
Post Space

Abstract The aim of this study was to evaluate the integrity of the coronal seal of Temp-Bond and compare it to Cavit and IRM after post space preparation using S. faecalis as a microbial tracer. In addition, the affect of two methods of gutta percha removal on the apical seal of root canal fillings was also evaluated. Forty extracted human single rooted teeth were prepared chemomechanically and obturated with gutta percha and AH26 sealer cement using the lateral cold condensation technique to a standardized working length of 15 mm. About 10 mm of the coronal gutta-percha was removed with either Peeso-reamer or a hot plugger. The roots were divided into three experimental groups of 10 roots and a control group. Each experimental group was subdivided equally into two groups of 15 each according to the method of post space preparation. Cavit, IRM, and Temp-Bond were used to seal the access opening. Each root was fixed in a cuvette containing Tryptic Soya Broth which, covered 2 mm of the root apex. Bacterial suspension was introduced through pipette. Fresh bacterial suspension was added every week, and the system was monitored daily for the growth of microorganisms for a period of one month. The results showed there was no significant difference in terms of coronal leakage between the three coronal materials used (P=0.478), but the methods of gutta-percha removal did have an impact on the apical leakage (P=0.047). The mean value showed the Peeso-reamer provided less leakage compared to using a hot plugger during the 30-day experimental time period. It was concluded the temporary type of coronal seal of endodontically treated teeth will not prevent coronal leakage if left for a long period of time. In addition, permanent cementation of the post with the coronal restoration should be carried out as soon as possible to prevent recontamination of the root canal. Citation Balto H, Al-Nazhan S, Al-Mansour K, Al-Otaibi M, Siddiqu Y. Microbial Leakage of Cavit, IRM, and Temp Bond in Post-prepared Root Canals Using Two Methods of Gutta-percha Removal: An In Vitro Study. J Contemp Dent Pract 2005 August;(6)3:053-061.

Sign in / Sign up

Export Citation Format

Share Document