Vortical feeding currents in nauplii of the calanoid copepod Eucalanus pileatus

2020 ◽  
Vol 638 ◽  
pp. 51-63 ◽  
Author(s):  
H Jiang ◽  
GA Paffenhöfer
Keyword(s):  
High Speed ◽  
Calanoid Copepod ◽  
Imaging System ◽  
Ventral Surface ◽  
Food Concentration ◽  
Core Flow ◽  
Micro Particle Image Velocimetry ◽  
Swimming Motion ◽  
Image Velocimetry ◽  
Beat Pattern

The goal of this study was to quantify feeding-current generation processes in mid to late nauplii and early copepodites of the calanoid copepod Eucalanus pileatus. Using a high-speed microscale imaging system (HSMIS) to conduct both microvideography and micro-particle image velocimetry (µPIV), free-swimming nauplii of E. pileatus were shown to use a novel ‘double draw-and-cut’ continuous appendage beat pattern, which is nonreciprocal, to generate a vortical feeding current at a Reynolds number of ~0.8. The feeding current consists of a core flow towards the ventral surface and 2 laterally flanking viscous vortices reinforcing the core flow. This feeding current is spatially limited with an r-3 decay, potentially reducing predation by rheotactic predators. The feeding current displaces water at ~1.0 × 106 naupliar body volumes per day towards the mouthpart zone. This would result in a clearance rate providing sufficient food at a relatively high environmental food concentration. HSMIS videos revealed that E. pileatus nauplii combine their feeding current and swimming motion to displace algae towards their mouth for capture, and can react to an incoming alga at a 300-500 µm distance away from the nearest naupliar setae, indicating remote detection presumably via chemoreception. The r-3-decay naupliar feeding current is suggested to enhance chemoreception by more effectively elongating the algal phycosphere towards the nauplius. Compared with nauplii, E. pileatus early copepodites, being larger in size and negatively buoyant, beat appendages in a more complex, intermittent pattern to generate an r-1-decay feeding current for displacing more water, indicating a trade-off among feeding, predator avoidance, and alga perception.

scholarly journals A novel cylindrical overlap-and-fling mechanism used by sea butterflies

2020 ◽  
Vol 223 (15) ◽  
pp. jeb221499 ◽  
Author(s):  
Ferhat Karakas ◽  
Amy E. Maas ◽  
David W. Murphy
Keyword(s):  
High Speed ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Flexible Wings ◽  
Micro Particle Image Velocimetry ◽  
Flying Insects ◽  
Marine Snails ◽  
Image Velocimetry ◽  
Edge Vortex ◽  
Generation Mechanisms

ABSTRACTThe clap-and-fling mechanism is a well-studied, unsteady lift generation mechanism widely used by flying insects and is considered obligatory for tiny insects flying at low to intermediate Reynolds numbers, Re. However, some aquatic zooplankters including some pteropod (i.e. sea butterfly) and heteropod species swimming at low to intermediate Re also use the clap-and-fling mechanism. These marine snails have extremely flexible, actively deformed, muscular wings which they flap reciprocally to create propulsive force, and these wings may enable novel lift generation mechanisms not available to insects, which have less flexible, passively deformed wings. Using high-speed stereophotogrammetry and micro-particle image velocimetry, we describe a novel cylindrical overlap-and-fling mechanism used by the pteropod species Cuvierina atlantica. In this maneuver, the pteropod's wingtips overlap at the end of each half-stroke to sequentially form a downward-opening cone, a cylinder and an upward-opening cone. The transition from downward-opening cone to cylinder produces a downward-directed jet at the trailing edges. Similarly, the transition from cylinder to upward-opening cone produces downward flow into the gap between the wings, a leading edge vortex ring and a corresponding sharp increase in swimming speed. The ability of this pteropod species to perform the cylindrical overlap-and-fling maneuver twice during each stroke is enabled by its slender body and highly flexible wings. The cylindrical overlap-and-fling mechanism observed here may inspire the design of new soft robotic aquatic vehicles incorporating highly flexible propulsors to take advantage of this novel lift generation technique.

Experimental Investigation of Boundary Layer Instabilities on the Free Surface of Non-Turbulent Jet

2012 ◽  
Author(s):  
Matthieu A. Andre ◽  
Philippe M. Bardet
Keyword(s):  
Boundary Layer ◽  
Free Surface ◽  
High Speed ◽  
Particle Tracking Velocimetry ◽  
Capillary Waves ◽  
Wave Growth ◽  
Image Velocimetry ◽  
Planar Laser ◽  
Surface Visualization ◽  
The Waves

Shear instabilities induced by the relaxation of laminar boundary layer at the free surface of a high speed liquid jet are investigated experimentally. Physical insights into these instabilities and the resulting capillary wave growth are gained by performing non-intrusive measurements of flow structure in the direct vicinity of the surface. The experimental results are a combination of surface visualization, planar laser induced fluorescence (PLIF), particle image velocimetry (PIV), and particle tracking velocimetry (PTV). They suggest that 2D spanwise vortices in the shear layer play a major role in these instabilities by triggering 2D waves on the free surface as predicted by linear stability analysis. These vortices, however, are found to travel at a different speed than the capillary waves they initially created resulting in interference with the waves and wave growth. A new experimental facility was built; it consists of a 20.3 × 146.mm rectangular water wall jet with Reynolds number based on channel depth between 3.13 × 104 to 1.65 × 105 and 115. to 264. based on boundary layer momentum thickness.

scholarly journals The Influence of Carrier Air Preheating on Autoignition of Inline-Injected Hydrogen–Nitrogen Mixtures in Vitiated Air of High Temperature

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Christoph A. Schmalhofer ◽  
Peter Griebel ◽  
Manfred Aigner
Keyword(s):  
Hydrogen Content ◽  
Gas Turbines ◽  
High Speed ◽  
Flame Stabilization ◽  
Operating Conditions ◽  
Promoting Effect ◽  
Experimental Conditions ◽  
Lean Premixed Combustion ◽  
Image Velocimetry ◽  
Fuel Mixtures

The use of highly reactive hydrogen-rich fuels in lean premixed combustion systems strongly affects the operability of stationary gas turbines (GT) resulting in higher autoignition and flashback risks. The present study investigates the autoignition behavior and ignition kernel evolution of hydrogen–nitrogen fuel mixtures in an inline co-flow injector configuration at relevant reheat combustor operating conditions. High-speed luminosity and particle image velocimetry (PIV) measurements in an optically accessible reheat combustor are employed. Autoignition and flame stabilization limits strongly depend on temperatures of vitiated air and carrier preheating. Higher hydrogen content significantly promotes the formation and development of different types of autoignition kernels: More autoignition kernels evolve with higher hydrogen content showing the promoting effect of equivalence ratio on local ignition events. Autoignition kernels develop downstream a certain distance from the injector, indicating the influence of ignition delay on kernel development. The development of autoignition kernels is linked to the shear layer development derived from global experimental conditions.

Betadine has a ciliotoxic effect on ciliated human respiratory cells

2014 ◽  
Vol 129 (S1) ◽  
pp. S45-S50 ◽  
Author(s):  
J H Kim ◽  
J Rimmer ◽  
N Mrad ◽  
S Ahmadzada ◽  
R J Harvey
Keyword(s):  
Epithelial Cells ◽  
High Speed ◽  
Imaging System ◽  
Beat Frequency ◽  
Ciliary Beat Frequency ◽  
Positive Control ◽  
Clinical Dose ◽  
Significant Difference ◽  
Sinonasal Mucosa ◽  
Ciliary Beat

AbstractObjective:This study investigated the effect of Betadine on ciliated human respiratory epithelial cells.Methods:Epithelial cells from human sinonasal mucosa were cultured at the air–liquid interface. The cultures were tested with Hanks' balanced salt solution containing 10 mM HEPES (control), 100 µM ATP (positive control), 5 per cent Betadine or 10 per cent Betadine (clinical dose). Ciliary beat frequency was analysed using a high-speed camera on a computer imaging system.Results:Undiluted 10 per cent Betadine (n = 6) decreased the proportion of actively beating cilia over 1 minute (p < 0.01). Ciliary beat frequency decreased from 11.15 ± 4.64 Hz to no detectable activity. The result was similar with 5 per cent Betadine (n = 7), with no significant difference compared with the 10 per cent solution findings.Conclusion:Betadine, at either 5 and 10 per cent, was ciliotoxic. Caution should be applied to the use of topical Betadine solution on the respiratory mucosal surface.

Sign in / Sign up

Export Citation Format

Share Document