scholarly journals Rancang Bnagun Kontrol Suhu Pada Tungku Pemanas Mesin Destilasi Minyak Atsiri Daun Nilam Menggunakan PLS S7 1200 Dan HMI

2021 ◽  
Vol 7 (1) ◽  
pp. 29
Author(s):  
Virna Umro Audiana ◽  
Muhamad Rifa'i ◽  
Fathoni Fathoni
Keyword(s):  
Steady State ◽  
Real Time ◽  
Human Machine Interface ◽  
Fine Tuning ◽  
Set Point ◽  
Machine Interface

Nilam (Pogestemon cablin Benth) adalah tanaman.yang dapat menghasilkan minyak atsiri. dan.dikembangkan untuk.produk obat-obatan..Dalam proses penyulingan, pengendalian suhu air merupakan faktor penting pada sistem destilasi. .Suhu yang tidak dikontrol.dengan.baik dapat menyebabkan terjadinya ledakan karena.tungku tidak mampu menahan tekanan yang dihasilkan. . Mayoritas penyulingan minyak nilam yang dilakukan oleh produsen.di Indonesia masih menggunakan peralatan sederhana, sehingga kualitas minyak nilam yang didapat kurang optimal dan menjadi di bawah standar dari yang disyaratkan. Upaya yang dapat dilakukan adalah meningkatkan efisiensi mesin.distilasi.yangdilengkapi.denganpengontrolan.suhu.air. menggunakan .PLC (Programmable Logic.Controller) Siemens.S7 – 1200.dan HMI.(Human Machine Interface) sebagai alat untuk memonitoring kerja.sistem secara real time. Untuk mendapatkan respon system.yang stabil, diterapkan metode.kontrol PID (Proportional.Integral.Derivatif) pada sistem. Tungku pemanas yang digunakan dengan ukuran diameter tungku 70 cm dengan tinggi 45.5 cm dan kapasitas 175 L. Suhu yang dikontrol pada tungku adalah 100°C - 115°C dengan menggunakan fine tuning diperoleh nilai Kp = 1.0 , Ti = 20.0 dan Td =0.00003. Hasil dari pengujian sistem kontrol suhu didapatkan efesiensi sistem 99.9%. Dan berdasarkan grafik respon sistem diperoleh karakteristik error steady state 0.3 – 0.7 % dan overshoot tidak lebih dari 1%. Dari parameter kontrol fine tuning PID tersebut, menunjukkan respon sistem yang baik dan mampu menjaga suhu sesuai dengan set point yang diberikan pada HMI.

scholarly journals Penerapan Metode Fuzzy Logic pada Pengaturan Kecepatan Crusher Motor dalam Proses Sari Buah Apel dengan Fitur HMI (Human Machine Interface)

2021 ◽  
Vol 6 (2) ◽  
pp. 10
Author(s):  
Andre Dwi Syahrul Kirom ◽  
Ratna Ika Putri ◽  
Edi Sulistio Budi
Keyword(s):  
Fuzzy Logic ◽  
Real Time ◽  
Human Machine Interface ◽  
Set Point ◽  
Rotary Encoder ◽  
Machine Interface

Bermula dari kegemaran masyarakat akan konsumi sari buah yang siap saji dapat memberikan peluang yang sangat besar bagi para petani apel guna menigkatkan harga jual dari produk olahan mereka. akan tetapi proses pembuatan sari apel sendiri masih menggunakan proses manual, yakni pemerasan inti sari apel menggunakan kain sebagai medianya. Berdasarkan penelitian terdahulu terkait pengaturan kecepatan crusher motor dalam proses ekstraksi buah apel yang menggunakan metode PI masih belum menghasilkan kontrol waktu yang stabil, maka dari itu pada penelitian ini mengunakan fuzzy logic yang ditanamkan pada microcontroller sebagai kontrolernya dan sensor rotary encoder sebagai sensor kecepatannya. fuzzy terdiri dari Error dengan membersif function Kurang, Samadengan, Ples, DError adalah, - =, + dan memiliki Output lambat, sedang, cepat. Dengan set point 2000 RPM Chrusher dapat menstabilkan kecepatan motor chrasher terhadap variasi beban dari 1Kg dan 2 Kg. waktu tunda = 2 detik, waktu naik = 2 detik, waktu puncak = 3 detik, overshoot maksimal = 3.75%,error steasi state = 1,9% waktu setling = 3 detik. hasil dari respon sisten dihubungkan secara real time dengan HMI.

scholarly journals Modul Sistem Pengaturan Suhu Mini Boiler Dengan Metode PID Menggunakan PLC dan HMI

2021 ◽  
Vol 6 (3) ◽  
pp. 72
Author(s):  
Rizal Braman Setya ◽  
Muhammad Rifa'i ◽  
Edi Sulistio Budi
Keyword(s):  
Steady State ◽  
Time Delay ◽  
Real Time ◽  
Programmable Logic Controller ◽  
Human Machine Interface ◽  
Settling Time ◽  
Programmable Logic ◽  
Machine Interface

Perkembangan teknologi saat ini sangat pesatdalam berbagai bidang terlebih di dunia industrialisasi.Teknologi dalam bidang konversi energi saat ini telahberkembang sangat pesat dalam memunculkan berbagai ideide kreatif untuk dimanfaatkan dalam bidang industri. Salahsatunya boiler, boiler adalah bejana yang digunakan untukmenghasilkan uap air (steam) yang akan digunakan sebagaipemanas atau tenaga penggerak seperti turbin. Salah satuperangkat kontrol modern yang dapat diterapkan dalamberlangsungnya proses produksi di industri saat ini adalahPLC (Programmable Logic Controller) sebagai kontroler danHMI (Human Machine Interface) sebagai alat untukmemonitoring kinerja sistem secara real time. Denganberkembangnya sistem kontrol pada suatu industri, makamodul miniplant boiler yang merupakan salah satu peralatanyang ada di indistri ini dapat digunakan sebagai mediapembelajaran di laboraturium sebelum masuk ke duniaindustri yang sesungguhnya. Pengontrolan suhu pada miniboiler merupakan suatu hal yang sangat penting karena suhumerupakan parameter yang mudah berubah sehingga perludilakukan pengontrolan agar suhu dapat tetap stabil pada nilaitertentu terhadap berbagai gangguan sehingga tidak terjadikegagalan sistem akibat suhu yang terlalu tinggi. Untukmendapatkan respon sistem yang stabil, diterapkan metodekontrol PID pada sistem. Pada skripsi ini digunakan miniplantboiler dengan ukuran diameter tabung 15 cm dengan panjang30 cm dan kapasitas 5 L. Suhu yang dikontrol pada tabungadalah 100 °C dengan hasil nilai parameter PID menggunakanmetode Ziegler Nichols Sistem Orde 1 diperoleh nilai Kp =20.03, Ti =120 dan Td = 4,2. Dan dari grafik respon sistemdiperoleh karakteristik %error steady state = 0,1 %, time rise(Tr) = 2130 s, time delay (Td) = 900, dan settling time (Ts) =2370 s. Dari nilai parameter kontrol PID tersebut,menunjukkan respon sistem yang baik dan mampu menjagasuhu sesuai dengan setpoint yang diberikan pada HMI untukkondisi sistem tanpa diberikan gangguan atau diberikangangguan

scholarly journals Real-Time EEG–EMG Human–Machine Interface-Based Control System for a Lower-Limb Exoskeleton

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 84070-84081 ◽  
Author(s):  
Susanna Yu. Gordleeva ◽  
Sergey A. Lobov ◽  
Nikita A. Grigorev ◽  
Andrey O. Savosenkov ◽  
Maxim O. Shamshin ◽  
...  
Keyword(s):  
Control System ◽  
Real Time ◽  
Lower Limb ◽  
Human Machine Interface ◽  
Lower Limb Exoskeleton ◽  
Machine Interface

scholarly journals Design of the Control System for Rehabilitation Horse Based on MCU STC89C52

2011 ◽  
Vol 2-3 ◽  
pp. 234-238
Author(s):  
Hai Tao Qi ◽  
Guang Lei Feng ◽  
Hong Wang
Keyword(s):  
Control System ◽  
Real Time ◽  
Digital Signal ◽  
Human Machine Interface ◽  
Analog Signal ◽  
The Real ◽  
User Input ◽  
Speed Controller ◽  
Machine Interface ◽  
Signal Output

It introduces a design of the control system for rehabilitation horse based on MCU STC89C52. The system’s control core is an 8-bit MCU STC89C52. First, the user input commands through the keyboard, then send commands to the DA conversion chip PCF8591 which can achieve the digital signal to analog signal output after dealing with MCU. Finally, PCF8591 send analog signal to the speed controller of DC motor in order to control the DC motor’s speed. Meanwhile, it builds a human-machine interface (HMI) to display the real-time speed of the horse through LCD.

scholarly journals PLC/HMI-Based Implementation of a Real-Time Educational Power System Protective Relays Platform

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 118
Author(s):  
Jawad Radhi Mahmood ◽  
Ramzy Salim Ali ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Power System ◽  
Real Time ◽  
Engineering Students ◽  
Operation Time ◽  
Human Machine Interface ◽  
Time Response ◽  
Programmable Logic ◽  
Protective Relaying ◽  
Machine Interface ◽  
Protective Relays

Engineering laboratories are key elements in engineering learning and are essential for a concrete understanding of engineering topics and experiments. These key laboratories are no longer just hardware-dependent, they are a creative combination of programmable hardware and also user-defined driving software. In this work, an educational power system protective relaying laboratory platform was designed and implemented using a programmable logic controller (PLC) and human–machine interface (HMI) in order to introduce engineering students to the operating mechanisms experimentally. It engaged the students in selecting settings and upgrading the inverse definite minimum time (IDMT) protection relays for overcurrent, overvoltage, undervoltage, and differential current. With the platform and the help of the HMI, the students mastered (or came close to mastering) the field of protective relays, especially those explicitly implemented in the platform. The students were also able to see the real-time response that is equivalent to the relay operation time of the protective relays under the various possible settings, and the kinesthetic learning that was involved gave them a deeper understanding of what is involved in relays upgrading.

Implementasi Realitas Berimbuh pada Antarmuka Manusia-Mesin di Industri Proses

2021 ◽  
Vol 13 (2) ◽  
pp. 71-78
Author(s):  
Awang Noor Indra Wardana ◽  
Yahya Bachtiar ◽  
M Bobby Andriansyah ◽  
Rifdahlia Salma
Keyword(s):  
Augmented Reality ◽  
Real Time ◽  
Three Dimensional ◽  
Data Communication ◽  
Human Machine Interface ◽  
Oil Refinery ◽  
Process Equipment ◽  
Message Queue ◽  
Oil Refineries ◽  
Machine Interface

Process industries such as oil refineries, petrochemical plants, and power plants require a human-machine interface system to monitor continuously. The operator usually carries out monitoring via a human-machine interface. However, it is difficult to know the condition of process equipment in real-time. The implementation of augmented reality allows engineers to visualize process equipment in real-time when conducting field inspections. The implementation of augmented reality at the human-machine interface to the fluid catalytic cracking process in an oil refinery is discussed in this paper. The design was started by developing a three-dimensional process equipment model using Autodesk Inventor. The result of the three-dimensional model then using Unity 3D software connected to the Vuforia Engine was implemented on a gadget into an augmented reality application. Data communication performance analysis was carried out using inferential statistics methods to test variations in service quality at levels 0, 1, and 2. The result of the Tukey test showed that the communication network latency value in level 2 was significantly higher than levels 0 and 1, which was 0.704±0.108 seconds. These results indicate that augmented reality can be implemented on human-machine interfaces by ensuring the quality of data communication services using Message Queue Telemetry Transport (MQTT) protocol at levels 0 or 1.

Design and Realization of Remote Control UAV’s Flight Controller

2014 ◽  
Vol 989-994 ◽  
pp. 2951-2954
Author(s):  
Ye Tian ◽  
Hong De Deng ◽  
Hao Yue Zhuang
Keyword(s):  
Remote Control ◽  
Real Time ◽  
Interface Design ◽  
Human Machine Interface ◽  
Ground Control ◽  
Ground Control Station ◽  
Machine Interface ◽  
Developing Platform

To provide UAV’s operator with flight information in real time, according to the property of remote control UAV and human-machine interface design, a flight controller has been implemented. The flight controller used LabWindows/CVI、GL Studio and UDP communication as the main developing platform. The system has been used in projection, and the test had showed that it could meet the need of the GCS(ground control station) of remote control UAV.

scholarly journals BIM-Based Human Machine Interface (HMI) Framework for Energy Management

2020 ◽  
Vol 12 (21) ◽  
pp. 8861
Author(s):  
Taewook Kang
Keyword(s):  
Real Time ◽  
Energy Management ◽  
Control Point ◽  
Heterogeneous Systems ◽  
Human Machine Interface ◽  
Information Modeling ◽  
Time Data ◽  
Positive Effects ◽  
Building Energy Management ◽  
Machine Interface

This study proposes a Building Information Modeling (BIM)-based Human Machine Interface (HMI) framework for intuitive space-based energy management. The BIM-based HMI supports building managers with a method of linking data between BIM and Building Energy Management System (BEMS), which are heterogeneous systems, and provides space-based real-time energy monitoring. This study also proposes a BIM and BEMS data linking framework for systematic BIM-based HMI development. Towards this end, the BIM-based HMI framework was defined after deriving the considerations and requirements necessary for linking the energy control point and BIM through a questionnaire designed by practitioners. Through case analysis, the authors implemented BIM-based HMI and analyzed its effects. The results of the analysis confirmed the positive effects (3.9/5.0) on the connectivity of BIM-based HMI, the benefits (4.3/5.0) for real-time data monitoring, the system function expandability, and the BIM-based spatial intuitiveness.

Sign in / Sign up

Export Citation Format

Share Document