EXPERIENCE ON IMPLEMENTATION OF HOT IN-PLACE RECYCLING OF ASPHALT CONCRETE IN UKRAINE

Author(s):  
Vasyl Nagaychuk ◽  
Sergii Illiash ◽  
Tatyana Tereshchenko

Rehabilitation of asphalt concrete layers of road pavements using HIR technologies enables effective elimination of surface defects (rutting, cracking, raveling, bleeding (flushing)) including defects caused by the non-conformity of asphalt concrete to the standard specifications. Due to the economical and ecological advantages, HIR technologies belong to the present-day effective alternative methods of rehabilitation of asphalt concrete pavements. In Ukraine, HIR technologies were first applied on intermediate repair works on an area of the international road I-01 “Kyiv-Chernihiv-Novyye Yarylovichi” in the 2013. Now, HIR technologies have been applied on repair works on numerical objects including areas on such state motor roads as I-01, I-06, N-09, R-10, R-67. The presented paper analyzes the results of monitoring of materials and technologies which was aimed on HIR performance investigation supported by State Road Agency of Ukraine (Ukravtodor) throughout 2014-2018. The results of monitoring of HIR technologies including laboratory evaluation of materials and also field testing of the rehabilitated pavements led to the conclusions fitted by the world-wide experience on implementation of HIR technologies. 1. Being applied to the structurally sound pavements, HIR provides effective elimination of surface defects of flexible pavement to a depth of (50-60) mm including defects caused by the non-conformity of asphalt concrete to the standard specifications. However, HIR is not suitable for existing asphalt pavements which have too much variation in asphalt concrete composition and thickness within the project limits. 2. The efficiency of asphalt pavement rehabilitation using HIR technologies largely depends on precise engineering consideration which determines the efficiency of preparatory (repair) works including some special works such as: – correction of cracks in case of cracking that extends below the depth of hot recycling; – re-compaction of an unbound base layer(s) in case of the insufficient compaction causing “alligatored” network-like cracking of asphalt pavement. 3. Proper technical and working conditions of the rehabilitated pavement during the nominal life cycle could be maintained by overlaying the surface treatment using bituminous emulsion materials or by single-pass overlaying a new hot-mixed asphalt concrete layer. Investigations accomplished during the implementation of HIR technologies allow enhance quality of recycled materials and also promote the entire adaptation of HIR technologies to the Ukrainian standards. Keywords: asphalt pavement rehabilitation, hot in-place recycling, recycled asphalt concrete, field testing, road pavement strength measurement, rutting measurement.

2020 ◽  
Vol 4 (2) ◽  
pp. 172-179
Author(s):  
Yogi Oktopianto ◽  
Dwi Wahyu Hidayat

The use of recycling technologies to the principles of green roads should get priority. Reclaimed Asphalt Pavement (RAP) has not been used properly is a problem in this study. Hotmix Recycling is a recycling technique that can be applied to road pavement rehabilitation and maintenance. The research was conducted to determine the cost-efficiency of recycled asphalt. The method used in this research is to analyze the unit price of conventional asphalt maintenance and to analyze the unit price of recycled asphalt in order to find out how much efficiency is obtained of asphalt pavement recycled. The results showed that the cost of conventional asphalt is Rp.1,160,000 per ton and the price of recycled asphalt is Rp.915,000 per ton, there is a savings of Rp. 245,000 per ton, The use of recycled asphalt technology in the periodic asphalt of the Ir. Wiyoto Wiyono toll roads can save operational and maintenance costs of Rp. 3,013,500,000.00


2013 ◽  
Vol 40 (2) ◽  
pp. 181-187 ◽  
Author(s):  
Jean-Pascal Bilodeau ◽  
Guy Doré ◽  
Jonas Depatie

The use of recycled asphalt pavement (RAP) aggregates as replacement for new materials in the pavement base weakens the layer in regards to the resistance to permanent deformation under repeated loading. A mechanistic based design procedure is proposed to ensure that base layers containing RAP particles have a similar rutting behaviour to base layers made of virgin aggregates. The design procedure allows calculating an asphalt concrete thickness increase that is based on permanent deformation behaviour of base materials. The calculation approach is based on multistage triaxial permanent deformation tests performed on granular material samples with varied RAP content. The tests allowed proposing an equation that relates permanent strain rate, RAP content, and deviatoric stress, which is the basis of the design procedure. Design charts are proposed to select adequate thickness increase for the asphalt concrete layer according to the expected RAP content in the base layer and asphalt concrete modulus.


2012 ◽  
Vol 178-181 ◽  
pp. 1361-1364
Author(s):  
Shi Bin Ma ◽  
Li Jie Wang ◽  
Guo Qiang Zhang

The main purpose of recycling is to reuse existing pavement material. First this paper reviews the necessary, feasibility and mechanistic analysis of recycled asphalt mixture, then summarizes the findings of a laboratory study to characterize and design recycled asphalt concrete mixtures using different tests. The laboratory tests carried out on the material were conventional test methods including unconfined compressive strength, cleavage strength, resilient modulus and shrinkage properties tests. The results of the laboratory can be taken as reference in design, engineering and further research.


2014 ◽  
Vol 13 (4) ◽  
pp. 153-160
Author(s):  
Piotr Koźlarek

Polish road network is made up of 95% local roads. Their technical condition is much worse in comparison to motorways and national roads network. The lack of financial resources is one of the main reasons for this situation. That is why there is a continuous search for technologies, that allow for fast and cheap pavement repair or modernization. The monolayer asphalt pavement is such a solution offering in addition to cost effectiveness and shorter construction time, also an increased durability. Our western neighbors developed the technical regulations for this technology under the name "Asphalttragdeckschicht" which is marked as AC 16 TD. In direct translation "Asphalttragdeckschicht" means supporting wearing course / base layer. The monolayer asphalt pavement consists of a single layer with thickness between 5 to 10 cm made of HMA that links the functions of two layers – asphalt base course and asphalt wearing course. Thanks to this, the monolayer is resistant to environmental conditions and provides an adequate bearing capacity for a given traffic load. Insufficient funding and the impossibility to put the street out of operation were the bases for the investor’s decision to build a 220m section of road pavement using the monolayer pavement technology in Pruszków near Warsaw. This project gave the possibility to learn and gain an experience with a new western technology applied to Polish reality.


2019 ◽  
Vol 14 (4) ◽  
pp. 521-542
Author(s):  
Robert Jurczak ◽  
Paweł Mieczkowski ◽  
Bartosz Budziński

The environmental considerations need to be taken into account in any road resurfacing and upgrading project, for example, by reusing asphalt rubble for production of new pavement courses. Mixtures containing larger amounts of recycled asphalt pavement are improved by adding rejuvenator additives. The tests performed on the recycled asphalt mixtures containing lard imidazoline confirm the suitability of this agent for paving applications. Lard imidazoline was found to improve the stiffness modulus, fatigue performance and resistance to the action of water and freezing temperatures. The parameters obtained at the optimum content of additive complied with the criteria defined for virgin asphalt concrete and other mixtures of that kind.


2011 ◽  
Vol 105-107 ◽  
pp. 1211-1214
Author(s):  
Xing Ying Zhang ◽  
Dong Yu Sun

With China's rapid economic development, transport markets are booming. High way, especially expressway plays a very important role in economic development of today. Asphalt pavement surface is widely used. And with the development of expressway, more and more recycled asphalt concrete will be produced. So how to deal with these waste materials becomes a focus problem among researchers. In this paper, aging rules of asphalt according to the engineering practice and test data was talked about. The aging can be divided into: aging during transport, storage, and heating, aging during hot-mixing and paving, aging during the operation of the pavement. At the same time, the general knowledge about the regenerated asphalt was discussed. In addition, the possible damage of RAP technique to environment was also discussed.


Sign in / Sign up

Export Citation Format

Share Document