scholarly journals A Luminescent 1D Silver Polymer Containing [2.2]Paracyclophane Ligands

2021 ◽  
Vol 9 ◽  
Author(s):  
Campbell F. R. Mackenzie ◽  
Lucie Delforce ◽  
D. Rota Martir ◽  
David B. Cordes ◽  
Alexandra M. Z. Slawin ◽  
...  
Keyword(s):  
Solid State ◽  
Coordination Polymer ◽  
Building Blocks ◽  
Synthesis And Characterization ◽  
Crystalline Solid ◽  
X Ray Diffraction ◽  
Blue Fluorescence ◽  
X Ray ◽  
1D Coordination Polymer

[2.2]Paracyclophane scaffolds have seen limited use as building blocks in supramolecular chemistry. Here, we report the synthesis and characterization of a 1D coordination polymer consisting of silver(I) ions bound to a [2.2]paracyclophane scaffold functionalized with two 4-pyridyl units. The structure of the polymer has been determined from single crystal X-ray diffraction analysis and reveals two different silver coordination motifs that alternate along the 1D coordination polymer. The coordination polymer exhibits strong blue and sky-blue fluorescence in solution and in the crystalline solid state, respectively.

Solid State Synthesis and Characterization of Spintronics Material Cd0.55 Hg0.45 Te

2010 ◽  
Vol 44-47 ◽  
pp. 2299-2306
Author(s):  
H.M.Noor Ul Huda Khan Asghar ◽  
M. Asghar ◽  
M.S. Awan
Keyword(s):  
Solid State ◽  
Synthesis And Characterization ◽  
Chemical Analyses ◽  
X Ray Diffraction ◽  
Conventional Solid State Reaction ◽  
Cubic Crystal ◽  
X Ray ◽  
Edx Analyses ◽  
Scanning Electron

Polycrystalline spintronic material (Cd0.55Hg0.45Te) was synthesized by conventional solid state reaction. The samples ( = 5 mm and T = 1.5 mm) were prepared by uni-axial pressing. Samples were melted at 800°C for 3-2 hours. For chemical analyses, surface morphology and structural analyses, scanning electron microscopy (SEM) equipped with EDX system and X-ray diffraction studies were performed. XRD confirmed the cubic crystal structure. The Lattice constant of (Cd0.55Hg0.45Te) as determined by XRD was 0.6464 nm. The Miller indices (hkl) have been found by using crystallography method. The observed planes were (200), (210) and (331). The EDX analyses showed the typically compositions: Te 24.8% Cd 14.8% Al 5% and O2 46.4 % & C 9% (3 hours treatment) and Te 28.1% Cd 16% Al 4.1% and O2 39.3 %, Si 0.360% & C 12.1% (2 hours treatment) however we could not find any representative peak for Hg in all of the EDX analyses.

scholarly journals Synthesis and Characterization of Sr2CeO4 Phosphor Doped with Erbium

2010 ◽  
Vol 13 (1-2) ◽  
pp. 17
Author(s):  
K.V.R. Murthy ◽  
K. Suresh ◽  
B. Nageswara Rao ◽  
B. Walter Ratna Kumar ◽  
Ch. Atchyutha Rao ◽  
...  
Keyword(s):  
Rare Earth ◽  
Solid State ◽  
Sem Analysis ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rare Earth Ion ◽  
Solid State Reaction Technique ◽  
X Ray ◽  
Pl Emission

<p>The present paper reports the Photoluminescence (PL) of the Sr<sub>2</sub>CeO<sub>4</sub> phosphor, singly doped with Erbium rare-earth ion with different concentrations (0.01, 0.1, 0.2, 0.5 and 1%).The phosphor samples were synthesized using the standard solid state reaction technique. The effect of Er dopant on the structural, morphological, and Photoluminescent properties of the samples are studied with X-ray diffraction (XRD), PL and SEM analysis. The PL emission of undoped Sr<sub>2</sub>CeO<sub>4</sub> phosphor was observed at 470 nm with high intensity followed by the primary Er emissions with good intensity at 525, 530, 549, 557 and 565 nm.</p>

Synthesis and Characterization of o-Carboranylthioether Derivatives

2011 ◽  
Vol 66 (9) ◽  
pp. 947-952
Author(s):  
Meiling Xu ◽  
Yong Nie ◽  
Jinling Miao ◽  
Zhenwei Zhang ◽  
Bin Peng ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Solid State ◽  
Single Crystal ◽  
Uv Light ◽  
Chloroform Solution ◽  
Alkyl Halides ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

The reactions of the dithiolato-o-carborane salt (Et3NH)2(S2C2B10H10) (2) with alkyl halides BrCH2CH=CH2, BrCH2CH2CH2Cl and C6H5CH2Cl, afford the o-carboranyl-bisthioether derivatives 3a - c, which have been characterized by IR and NMR (1H, 13C, 11B) spectroscopy, mass spectrometry, and single-crystal X-ray diffraction (3c). The photoluminescent properties of the known compound 3c has been investigated. It exhibits a violet (chloroform solution) or blue (solid state) emission when excited with UV light.

Synthesis and Characterization of New Non-aromatic Texaphyrin-type Expanded Porphyrins

1999 ◽  
Vol 03 (02) ◽  
pp. 148-158 ◽  
Author(s):  
SYLVIE MEYER ◽  
MICHAEL C. HOEHNER ◽  
VINCENT LYNCH ◽  
JONATHAN L. SESSLER
Keyword(s):  
Schiff Base ◽  
Solid State ◽  
Good Yield ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Expanded Porphyrins ◽  
Meso Position ◽  
Macrocyclic Structure

The synthesis and X-ray diffraction-based characterization of a texaphyrin-type non-aromatic expanded porphyrin, 13,18,22,27-tetraethyl-14,17,23,26-tetramethyl-20-p-nitrophenyl-3,10,28,29,30,31-hexaazahexacyclo[23.2.1.04,9.112,15.116,19.121,24]untriaconta-2, 4, 5, 7, 10,12,14,16,18,-20,22,24(30),25,27-tetradecaene (1), is reported. This Schiff base macrocycle was prepared in good yield via the 1:1 HCl -catalyzed condensation of a tetrapyrrole dialdehyde precursor, (di(5-formyl-4,4'-diethyl-3,3'-dimethyl-2,2'-bipyrrole)-p-nitrophenylmethine), with 1,2-phenylenediamine. Compound 1 was assigned as being a 26 π-electron non-aromatic benzannulene on the basis of both proton NMR and single-crystal X-ray diffraction analyses. The latter studies, in particular, revealed a non-planar macrocyclic structure co-crystallized with a molecule of water. By varying either the diamine used in the cyclization step and/or the substituent in the meso-position of the tetrapyrrolic precursor, a range of other systems analogous to 1 could be obtained. The resulting systems were found to present good stability both in the solid state and in solution.

Synthesis and characterization of aza-bridged thiophene–pyrrole dyads and their isomers

2014 ◽  
Vol 92 (8) ◽  
pp. 765-770 ◽  
Author(s):  
Taniyuki Furuyama ◽  
Daiki Noguchi ◽  
Yuta Suzuki ◽  
Nagao Kobayashi
Keyword(s):  
Acid Ethyl Ester ◽  
Building Blocks ◽  
Pyrimidine Derivative ◽  
Synthesis And Characterization ◽  
Electronic Interaction ◽  
X Ray Diffraction ◽  
Absorption Properties ◽  
X Ray ◽  
Terminal Amino

Aza-bridged thiophene-pyrrole dyads were synthesized and characterized. Thiophenes substituted with electron-withdrawing groups (EWGs) were used as building blocks for the framework. However, an unprecedented cyclization occurred, and a thieno[2,3-d]pyrimidine derivative (4) was obtained in the reaction between 2,5-diamino-3,4-dicyanothiophene (1) and 3,5-diiminoisoindoline (3), whereas the reaction between 2,5-diamino-3,4-dicarboxylic acid ethyl ester (2) and 3 produced the desired dyad (5). The structures of 4 and 5 were unambiguously characterized by X-ray diffraction. Compound 5 is the first example of a core-modified azadipyrromethene, and the electronic interaction between the thiophene and pyrrole moieties was estimated with several spectroscopies. Several kinds of aryl groups can be attached at the terminal amino moiety of 4, and their unique absorption properties were also revealed.

The Reaction of Cp*ReH6, Cp* = C5Me5, with Monoborane to Yield a Novel Rhenaborane. Synthesis and Characterization of arachno-Cp*ReH3B3H8

2002 ◽  
Vol 67 (6) ◽  
pp. 808-812 ◽  
Author(s):  
Sundargopal Ghosh ◽  
Alicia M. Beatty ◽  
Thomas P. Fehlner
Keyword(s):  
Solid State ◽  
Single Crystal ◽  
Diffraction Study ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

The rhenaborane Cp*ReH3B3H8, which is generated by the reaction of Cp*ReH6 with BH3·THF, has been characterized spectroscopically in solution and by a single-crystal X-ray diffraction study in the solid state as a hydrogen-rich arachno-metallatetraborane.

Synthesis and Characterization of Barium Titanate by Solid-State Reaction

2014 ◽  
Vol 802 ◽  
pp. 285-290 ◽  
Author(s):  
Mônica C. de Andrade ◽  
Geysa N. Carneiro ◽  
Elizabeth L. Moreira ◽  
Jorge C. Araújo ◽  
Valéria C.A. Moraes
Keyword(s):  
Solid State ◽  
Barium Titanate ◽  
Solid State Reactions ◽  
Synthesis And Characterization ◽  
Temperature Influence ◽  
X Ray Diffraction ◽  
X Ray ◽  
Refinement Method ◽  
Doped Barium Titanate

Solid-state reactions were used to synthesize pure and doped barium titanate powder. Barium titanate formation with tetragonal perovskite structure was detected by X-ray diffraction and occurred at a temperature above 700°C for pure powder and 500°C for doped powder. However, quite crystalline samples were observed only at 800oC and 600°C for pure and doped barium titanate, respectively, what made the refinement of the synthesized powders possible. They were characterized by X-ray diffraction and Fourier transform infrared spectroscopy and scanning electron microscopy. X-ray diffraction data was analyzed by using the Fullprof Rietveld refinement approach, Thompson-Cox-Hastings pseudo-Voigt with function. The refinement method was effective in the study of the temperature influence on the microstructure of the analysis of pure and doped barium titanate.

Synthesis and characterization of TiN / Ti / AISI 410 coatings

2018 ◽  
Vol 2 (1) ◽  
pp. 7
Author(s):  
S Chirino ◽  
Jaime Diaz ◽  
N Monteblanco ◽  
E Valderrama
Keyword(s):  
Synthesis And Characterization ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Columnar Grains ◽  
Tin Thin Films ◽  
Steel Aisi ◽  
Interacting Surfaces ◽  
Stainless Steel Aisi

The synthesis and characterization of Ti and TiN thin films of different thicknesses was carried out on a martensitic stainless steel AISI 410 substrate used for tool manufacturing. The mechanical parameters between the interacting surfaces such as thickness, adhesion and hardness were measured. By means of the scanning electron microscope (SEM) the superficial morphology of the Ti/TiN interface was observed, finding that the growth was of columnar grains and by means of EDAX the existence of titanium was verified.  Using X-ray diffraction (XRD) it was possible to observe the presence of residual stresses (~ -3.1 GPa) due to the different crystalline phases in the coating. Under X-ray photoemission spectroscopy (XPS) it was possible to observe the molecular chemical composition of the coating surface, being Ti-N, Ti-N-O and Ti-O the predominant ones.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

scholarly journals High-pressure synthesis and characterization of the non-centrosymmetric scandium borate ScB6O9(OH)3

2020 ◽  
Vol 75 (6-7) ◽  
pp. 597-603
Author(s):  
Birgit Fuchs ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Structure Solution ◽  
Temperature Experiment ◽  
Pressure Synthesis

AbstractThe non-centrosymmetric scandium borate ScB6O9(OH)3 was obtained through a high-pressure/high-temperature experiment at 6 GPa and 1473 K. Single-crystal X-ray diffraction revealed that the structure is isotypic to InB6O9(OH)3 containing borate triple layers separated by scandium layers. The compound crystallizes in the space group Fdd2 with the lattice parameters a = 38.935(4), b = 4.4136(4), and c = 7.6342(6) Å. Powder X-ray diffraction and vibrational spectroscopy were used to further characterize the compound and verify the proposed structure solution.

Sign in / Sign up

Export Citation Format

Share Document