scholarly journals 60-GHz Half-Mode Substrate-Integrated Waveguide Bandpass Filter in 0.15-μm GaAs Technology

2021 ◽  
Vol 9 ◽  
Author(s):  
Xu-Juan Liu ◽  
Wen Wu ◽  
Kai-Da Xu ◽  
Ying-Jiang Guo ◽  
Qiang Chen
Keyword(s):  
Gallium Arsenide ◽  
Insertion Loss ◽  
Bandpass Filter ◽  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
60 Ghz ◽  
On Chip ◽  
Good Agreement

A compact 60-GHz on-chip bandpass filter (BPF) is presented using gallium arsenide (GaAs) technology. The miniaturization is achieved by the half-mode substrate-integrated waveguide (HMSIW) structure. Finally, a prototype of the BPF is fabricated and tested to validate the proposed idea, whose simulated and measured results are in good agreement. The measurements show that it has a center frequency at 58.6 GHz with a bandwidth of 17.9%, and the minimum insertion loss within the passband is 1.2 dB. The chip, excluding the feedings, is only about 0.38λg × 0.58λg, where λg is the guided wavelength at the center frequency.

Compact 60-GHz On-Chip Bandpass Filter With Low Insertion Loss

2018 ◽  
Vol 39 (1) ◽  
pp. 12-14 ◽  
Author(s):  
Lin-Pu Li ◽  
Wei Shen ◽  
Jin-Yi Ding ◽  
Xiao-Wei Sun
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
60 Ghz ◽  
Low Insertion Loss ◽  
On Chip

scholarly journals Design of an Offset Posts K- band Bandpass Filter using Substrate Integrated Waveguide for Microwave Applications

2020 ◽  
Vol 8 (6) ◽  
pp. 1056-1058
Keyword(s):  
Bandpass Filter ◽  
Dielectric Material ◽  
Ground Plane ◽  
Center Frequency ◽  
Pass Band ◽  
Substrate Integrated Waveguide ◽  
Low Loss ◽  
Communication Devices ◽  
Good Agreement ◽  
K Band

In this paper, an offset posts K-band bandpass filter has been designed using substrate integrated waveguide (SIW). SIW is formed inside a dielectric material by applying a top metal over the ground plane and trapping the structure on either side with rows of plated vias. SIW is effective and efficient solution in waveguide technique. The slotted windows are cut in tapered transition of SIW filter to attain low loss. The proposed filters are designed at 23 GHz center frequency. The simulated results exhibit low losses and sharp roll off characteristics in pass band. There is good agreement between the simulated results and the experimental results. The proposed filter is suitable for use in microwave communication devices.

An ultra-compact and low insertion loss 60 GHz CMOS on-chip bandpass filter

2018 ◽  
Vol 60 (12) ◽  
pp. 3050-3053
Author(s):  
Junjie Zeng ◽  
Xiuping Li ◽  
Weiwei Feng ◽  
Hua Zhu
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
60 Ghz ◽  
Low Insertion Loss ◽  
On Chip

scholarly journals A Bandpass Filter Using Half Mode SIW Structure with Step Impedance Resonator

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 51
Author(s):  
Min-Hang Weng ◽  
Chin-Yi Tsai ◽  
De-Li Chen ◽  
Yi-Chun Chung ◽  
Ru-Yuan Yang
Keyword(s):  
Insertion Loss ◽  
Return Loss ◽  
Bandpass Filter ◽  
Filter Design ◽  
Design Concept ◽  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Design Curve ◽  
Transmission Zeros ◽  
Measured Response

This paper presents a miniaturized bandpass filter, which uses half mode substrate integrated waveguide (HMSIW) structure with embedded step impedance structure (SIS). By embedding the stepped impedance structure into the top metal of the waveguide cavity, the center frequency can be quickly shifted to a lower frequency. The operating center frequency of the proposed bandpass filter (BPF) using HMSIW resonators with embedded SIS is tunable as functions of the parameters of the SIS. The design curve is provided. A filter example of the center frequency of the filter at 3.5 GHz is fabricated and measured, having the insertion loss |S21| less than 3 dB, and the return loss |S11| greater than 10 dB. The transmission zeros are located at 2.95 GHz and 3.95 GHz on both sides of the passband, both of which are lower than 30 dB. The simulation result and the measured response conform to the proposed design concept. The proposed HMSIW filter design is in line with the current 5G communication trend.

scholarly journals Novel Hexagonal Dual-Mode Substrate Integrated Waveguide Filter with Source-Load Coupling

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Ziqiang Xu ◽  
Gen Zhang ◽  
Hong Xia ◽  
Meijuan Xu
Keyword(s):  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Fractional Bandwidth ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Cavity Structure ◽  
Waveguide Filter ◽  
And Performance ◽  
Single Cavity ◽  
Good Agreement

Hexagonal dual-mode cavity and its application to substrate integrated waveguide (SIW) filter are presented. The hexagonal SIW resonator which can combine flexibility of rectangular cavity and performance of circular cavity is convenient for dual-mode bandpass filters design. By introducing coupling between source and load, the filter not only has good selectivity due to two controllable transmission zeros, but also has a small size by the virtue of its single-cavity structure. A demonstration filter with a center frequency of 10 GHz and a 3 dB fractional bandwidth of 4% is designed and fabricated to validate the proposed structure. Measured results are in good agreement with simulated ones.

60-GHz On-Chip Half-Mode SIW Bandpass Filter Using GaAs Technology

2021 ◽  
Author(s):  
Xiaoyu Weng ◽  
Kai-Da Xu ◽  
Yingjiang Guo ◽  
Qiang Chen
Keyword(s):  
Bandpass Filter ◽  
60 Ghz ◽  
On Chip

Compact dual-mode microstrip bandpass filter based on slotted square patch resonator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Karthie S. ◽  
Zuvairiya Parveen J. ◽  
Yogeshwari D. ◽  
Venkadeshwari E.
Keyword(s):  
Bandpass Filter ◽  
Filter Design ◽  
Center Frequency ◽  
Dual Mode ◽  
Content Type ◽  
Transmission Zeros ◽  
Compact Size ◽  
Mode Response ◽  
Better Than ◽  
Good Agreement

Purpose The purpose of this paper is to present the design of a compact microstrip bandpass filter (BPF) in dual-mode configuration loaded with cross-loop and square ring slots on a square patch resonator for C-band applications. Design/methodology/approach In the proposed design, the dual-mode response for the filter is realized with two transmission zeros (TZs) by the insertion of a perturbation element at the diagonal corner of the square patch resonator with orthogonal feed lines. Such TZs at the edges of the passband result in better selectivity for the proposed BPF. Moreover, the cross-loop and square ring slots are etched on a square patch resonator to obtain a miniaturized BPF. Findings The proposed dual-mode microstrip filter fabricated in RT/duroid 6010 substrate using PCB technology has a measured minimum insertion loss of 1.8 dB and return loss better than 24.5 dB with a fractional bandwidth (FBW) of 6.9%. A compact size of 7.35 × 7.35 mm2 is achieved for the slotted patch resonator-based dual-mode BPF at the center frequency of 4.76 GHz. As compared with the conventional square patch resonator, a size reduction of 61% is achieved with the proposed slotted design. The feasibility of the filter design is confirmed by the good agreement between the measured and simulated responses. The performance of the proposed filter structure is compared with other dual-mode filter works. Originality/value In the proposed work, a compact dual-mode BPF is reported with slotted structures. The conventional square patch resonator is deployed with cross-loop and square ring slots to design a dual-mode filter with a square perturbation element at its diagonal corner. The proposed filter exhibits compact size and favorable performance compared to other dual-mode filter works reported in literature. The aforementioned design of the dual-mode BPF at 4.76 GHz is suitable for applications in the lower part of the C-band.

scholarly journals Sharp Skirt Dual-Mode Bandpass Filter with Overlay Plate to Control Upper Passband Edge

2019 ◽  
Vol 8 (6) ◽  
pp. 2357-2360
Keyword(s):  
Analytical Model ◽  
Insertion Loss ◽  
Return Loss ◽  
Bandpass Filter ◽  
Center Frequency ◽  
Dual Mode ◽  
Rf Receivers ◽  
Attenuation Level ◽  
Frequency Selective ◽  
Fixed Center

This paper presents design and analytical model for Sharp Skirt Dual-Mode Bandpass Filter for RF receivers. Proposed filter is designed using open stub loaded H shaped resonator. Based on analytical model insertion loss S21 and return loss S11 for proposed filter are demonstrated. Inductive Overlaying plate is proposed to control upper passband edge of proposed filter to improve frequency selectivity with fixed center frequency. The proposed filter has sharp frequency selective range from 5.1GHz to 9.2GHz. With overlay plate, frequency selective range is tuned to 5.1GHz-8.6GHz. Without overlaying plate the proposed filter has return loss greater than 10dB and insertion loss of 0.7dB. Lower and upper passband edges are at 5.1GHz and 9.2GHz with attenuation level of 52dB and 54dB respectively. With overlaying plate, the filter has same S 11 and S 21 parameters, but upper passband edge is shifted from 9.2GHz to 8.6GHz

Miniaturized Wideband Bandpass Filter based on Capacitor-loaded One-eighth Wavelength Coupled Line

2021 ◽  
Vol 36 (7) ◽  
pp. 865-871
Author(s):  
Jin Shi ◽  
Jiancheng Dong ◽  
Kai Xu ◽  
Lingyan Zhang
Keyword(s):  
Insertion Loss ◽  
Simple Structure ◽  
Bandpass Filter ◽  
State Of The Art ◽  
Center Frequency ◽  
Fractional Bandwidth ◽  
Coupled Line ◽  
Transmission Zeros ◽  
Compact Size ◽  
Multiple Transmission

A novel miniaturized wideband bandpass filter (BPF) using capacitor-loaded microstrip coupled line is proposed. The capacitors are loaded in parallel and series to the coupled line, which makes the filter just require one one-eighth wavelength coupled line and achieve filtering response with multiple transmission poles (TPs) and transmission zeros (TZs). Compared with the state-of-the-art microstrip wideband BPFs, the proposed filter has the advantages of compact size and simple structure. A prototype centered at 1.47 GHz with the 3-dB fractional bandwidth of 86.5% is demonstrated, which exhibits the compact size of 0.003λ2 g (λg is the guided wavelength at the center frequency) and the minimum insertion loss of 0.37 dB.

Sign in / Sign up

Export Citation Format

Share Document