scholarly journals Development of a Wireless System to Control a Trombe Wall for Poultry Brooding

2021 ◽  
Vol 3 (4) ◽  
pp. 853-867
Author(s):  
Afonso Mota ◽  
Ana Briga-Sá ◽  
António Valente
Keyword(s):  
Smart Cities ◽  
Thermal Inertia ◽  
Small Data ◽  
Climate Conditions ◽  
Data Rates ◽  
Trombe Wall ◽  
Improve Heat Transfer ◽  
High Thermal Inertia ◽  
Opening And Closing ◽  
Shading Device

The Internet of Things asserts that several applications, such as smart cities or intelligent agriculture, can be based on various embedded systems programmed to do different tasks, by transferring data over a network from sensors to a server, where the information is stored and treated, supporting the decision-making process. In this context, LoRaWAN is an accurate network topology based on a wireless technology called LoRa that is capable of transmitting small data rates at a long range, using low-powered devices, making it ideal for the acquisition of climate variables, such as temperature and relative humidity. Applying this architecture to agriculture buildings can be very useful to guarantee indoor thermal comfort conditions. In this study, this technology is applied to a passive solar system composed by a high thermal inertia wall, defined as Trombe wall, with air vents provided in the massive wall to improve heat transfer by air convection, and an external shading device to avoid overheating during summer and heat losses during winter. It is intended to analyze the possibility to control the interiortemperature of a poultry brooding house given that, in the early stages of life, chickens need accurate climate conditions in order to enhance their growth and reduce their mortality rate. In brief, temperature values acquired by different sensors placed on the Trombe wall travel through a LoRaWAN wireless network and are received by an application that controls the actuators, in this case, the opening and closing of the Trombe wall air vents, while the external shading device is controlled locally.

scholarly journals CHANNEL ALLOCATION FOR WIRELESS NETWORKS BASED ON INTELLIGENT METHOD

2021 ◽  
Vol 20 (4) ◽  
pp. 32-37
Author(s):  
Dominik NEZNÍK ◽  
◽  
Ľubomír DOBOŠ
Keyword(s):  
Wireless Networks ◽  
Data Transfer ◽  
Channel Allocation ◽  
Smart Cities ◽  
Data Rates ◽  
Different Types ◽  
Fuzzy Logic Method ◽  
Network Technologies ◽  
Near Future

In this paper, will be presented actual research of the intelligent channel allocation. The intelligent channel allocation is based on combination of fuzzy logic method and game theory attributes to increase quality of link in network. The channel allocations will become an important phenomenon in different types of networks such as 5G technology, wireless networks (IEEE 802.11xx), Z-Wave, LoRa, 3G, 4G, etc. In the near future, new network technologies, Internet of Things (IoT) and Smart Cities will need to have intelligent channel allocation to prevent interference on the channels used for data transfer. These networks along with IoT are considered as promising technology, that interconnects different types of networks into one fully functional network. The aim of this paper is to present the concept of a methods for channel allocation in wireless networks, where channels work as communication medium based on IEEE 802.11xx technology. The simulations prove, that proposed method is able to provide lower interference, improve data rates and increase quality of links.

scholarly journals Thermal modes of space objects with high thermal inertia

2017 ◽  
pp. 267-274
Author(s):  
M.M. Penkov ◽  
A.M. Dzitoev ◽  
E.V. Lapovok ◽  
S.I. Khankov
Keyword(s):  
Thermal Inertia ◽  
Space Objects ◽  
High Thermal Inertia

New Reactor Safety Measures for the European Sodium Fast Reactor - Part I: Conceptual Design

2021 ◽  
Author(s):  
Joel Guidez ◽  
Janos Bodi ◽  
Konstantin Mikityuk ◽  
Enrico Girardi ◽  
Bernard Carluec
Keyword(s):  
Fast Reactor ◽  
Heat Removal ◽  
Thermal Inertia ◽  
Lessons Learned ◽  
Reactor Safety ◽  
Fukushima Accident ◽  
Safety Level ◽  
Safety Measures ◽  
Sodium Fast Reactor ◽  
High Thermal Inertia

Abstract Following up the previous CP-ESFR project, the ESFR-SMART project considers the safety objectives envisaged for Generation-IV reactors, taking into account the lessons learned from the Fukushima accident, in order to increase the safety level of the European Sodium Fast Reactor (ESFR). In accordance with these objectives, guidelines have been defined to drive the ESFR-SMART developments, mainly simplifying the design and using all the positive features of Sodium Fast Reactors (SFR), such as low coolant pressure, efficiency of natural convection, possibility of decay heat removal (DHR) by atmospheric air, high thermal inertia and long grace period before a human intervention is needed. In this paper, a set of new ambitious safety measures is introduced for further evaluation within the project. The proposed set aims at consistency with the main lines of safety evolutions since the Fukushima accident, but it does not yet constitute the final comprehensive safety analysis. The paper gives a first review of the new propositions to enhance the ESFR safety, leading to a simplified reactor, forgiving and including a lot of passivity. This first version is supported by the various project tasks in order to assess the relevance of the whole design in comparison to the final safety objectives.

A thermal model of the sailback pelycosaur

Paleobiology ◽  
1986 ◽  
Vol 12 (4) ◽  
pp. 450-458 ◽  
Author(s):  
Steven C. Haack
Keyword(s):  
Thermal Model ◽  
Energy Exchange ◽  
Thermal Inertia ◽  
Significant Problem ◽  
Internal Temperature ◽  
Warm Up ◽  
Excess Heat ◽  
Thermal Regimes ◽  
High Thermal Inertia ◽  
Standard Techniques

Standard techniques of energy exchange analysis are applied to modelling the thermal regimes of several species of sailback pelycosaurs. Of particular interest is the role played by the sail in thermoregulation. Although the sail did increase the rate at which the model could warm up in the morning, its effectiveness fell short of previous estimates. The sail increased the daytime internal temperature by typically 3°C to 6°C. The more massive subjects had the highest temperature increases owing partly to their higher thermal inertia and partly to their disproportionately large sails. The sail had no impact upon the nocturnal minimums in temperature.Overheating does not appear to have been a significant problem in the Permian environment, particularly in view of the high thermal inertia of the subjects modeled. When overheating occurred, the sail was of limited value for dumping excess heat.

scholarly journals Effect of phase change material using in building thermal comfort applications through several climate conditions.

2020 ◽  
Vol 170 ◽  
pp. 01007
Author(s):  
Marwa El Yassi ◽  
Ikram El Abbassi ◽  
Alexandre Pierre ◽  
Yannick Melinge
Keyword(s):  
Thermal Comfort ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Chemical Change ◽  
Thermal Inertia ◽  
Temperature Fluctuations ◽  
High Energy ◽  
Climate Conditions ◽  
Change Material

Nowadays, buildings sector contributes to climate change by consuming a considerable amount of energy to afford thermal comfort for occupants. Passive cooling techniques are a promising solution to increase the thermal inertia of building envelopes, and reduce temperature fluctuations. The phase change materials, known as PCM, can be efficiently employed to this purpose, because of their high energy storage density. Among the various existing solutions, the present study is dedicated to solid-liquid phase change materials. Temperature evolution (according to their defined temperature range) induces the chemical change of the material and its state. For building applications, the chemical transition can be accomplished from liquid to solid (solidification) and from solid to liquid (melting). In fact, this paper presents a comparative thermal analysis of several test rooms with and without phase change materials embedded in a composite wallboard in different climates. The used PCM consist in a flexible sheet of 5 mm thickness (Energain, manufactured by the company DuPont de Nemours). The main properties of such a commercial solution have been delivered by the manufacturer and from analyses. The room model was validated using laboratory instrumentations and measurements of a test room in four cities: Lyon; Reading and Casablanca. Results indicate that this phase change material board can absorb heat gains and also reduce the indoor air temperature fluctuations during daytime. The aim of the study is to show the benefits of this layer with phase change material and compare it in different climatic zones.

Steady State and Transient Comparison of Perimeter and Row-Based Cooling Employing Controlled Cooling Curves

2015 ◽  
Author(s):  
Husam A. Alissa ◽  
Kourosh Nemati ◽  
Bahgat Sammakia ◽  
Alfonso Ortega ◽  
David King ◽  
...  
Keyword(s):  
Steady State ◽  
Heat Exchanger ◽  
Data Center ◽  
Cooling System ◽  
Air Flow ◽  
Thermal Inertia ◽  
Small Data ◽  
Cfd Model ◽  
Controlled Cooling ◽  
Failure Scenario

The perpetual increase of data processing has led to an ever increasing need for power and in turn to greater cooling challenges. High density (HD) IT loads have necessitated more aggressive and direct approaches of cooling as opposed to the legacy approach by the utilization of row-based cooling. In-row cooler systems are placed between the racks aligned with row orientation; they offer cool air to the IT equipment more directly and effectively. Following a horizontal airflow pattern and typically occupying 50% of a rack’s width; in-row cooling can be the main source of cooling in the data center or can work jointly with perimeter cooling. Another important development is the use of containment systems since they reduce mixing of hot and cold air in the facility. Both in-row technology and containment can be combined to form a very effective cooling solution for HD data centers. This current study numerically investigates the behavior of in-row coolers in cold aisle containment (CAC) vs. perimeter cooling scheme. Also, we address the steady state performance for both systems, this includes manufacturer’s specifications such as heat exchanger performance and cooling coil capacity. A brief failure scenario is then run, and duration of ride through time in the case of row-based cooling system failure is compared to raised floor perimeter cooling with containment. Non-raised floor cooling schemes will reduce the air volumetric storage of the whole facility (in this small data center cell it is about a 20% reduction). Also, the varying thermal inertia between the typical in-row and perimeter cooling units is of decisive importance. The CFD model is validated using a new data center laboratory at Binghamton University with perimeter cooling. This data center consists of one main Liebert cooling unit, 46 perforated tiles with 22% open area, 40 racks distributed on three main cold aisles C and D. A computational slice is taken of the data center to generalize results. Cold aisle C consists of 16 rack and 18 perforated tiles with containment installed. In-row coolers are then added to the CFD model. Fixed IT load is maintained throughout the simulation and steady state comparisons are built between the legacy and row-based cooling schemes. An empirically obtained flow curve method is used to capture the flow-pressure correlation for flow devices. Performance scenarios were parametrically analyzed for the following cases: (a) Perimeter cooling in CAC, (b) In-row cooling in CAC. Results showed that in-row coolers increased the efficiency of supply air flow utilization since the floor leakage was eliminated, and higher pressure build up in CAC were observed. This reduced the rack recirculation when compared to the perimeter cooled case. However, the heat exchanger size demonstrated the limitation of the in-row to maintain controlled set point at increased air flow conditions. For the pump failure scenario, experimental data provided by Emerson labs were used to capture the thermal inertia effect of the cooling coils for in-row and perimeter unit, perimeter cooled system proved to have longer ride through time.

scholarly journals Novel active method for the estimation of a building wall thermal resistance

2020 ◽  
Vol 172 ◽  
pp. 14008
Author(s):  
Adrien François ◽  
Laurent Ibos ◽  
Vincent Feuillet ◽  
Johann Meulemans
Keyword(s):  
Steady State ◽  
Thermal Resistance ◽  
Building Materials ◽  
Thermal Inertia ◽  
Thermal Response ◽  
Heat Fluxes ◽  
External Temperature ◽  
Building Wall ◽  
High Thermal Inertia

The thermal resistance of a wall can be readily measured in steady-state. However, such a state is seldomly achieved in a building because of the variation of outdoor conditions as well as the high thermal inertia of building materials. This paper introduces a novel active (dynamic) method to measure the thermal resistance of a building wall. Not only are active approaches less sensitive to external temperature variations, they also enable to perform measurements within only a few hours. In the proposed methodology, an artificial thermal load is applied to a wall (heating of the indoor air) and its thermal response is monitored. Inverse techniques are used with a reduced model to estimate the value of the thermal resistance of a wall from the measured temperatures and heat fluxes. The methodology was validated on a known load-bearing wall built inside a climate chamber. The results were in good agreement with reference values derived from a steady-state characterization of the wall. The method also demonstrated a good reproducibility.

scholarly journals An Innovative Façade Element with Controlled Solar-Thermal Collector and Storage

2020 ◽  
Vol 12 (13) ◽  
pp. 5281
Author(s):  
Thomas Wüest ◽  
Lars O. Grobe ◽  
Andreas Luible
Keyword(s):  
Solar Radiation ◽  
Thermal Storage ◽  
Thermal Mass ◽  
Building Performance ◽  
Water Tank ◽  
Closed Cavity ◽  
Solar Thermal Collector ◽  
Trombe Wall ◽  
Shading Device ◽  
Heat Transfers

A novel façade element is presented that forms a symbiosis between an enhanced box-type window, a closed cavity façade, and a Trombe wall. This hybrid, transparent-opaque façade element features an absorbing water tank, that is installed behind a controlled shading device toward the cavity of a non-ventilated Double Skin Façade in the parapet section. To evaluate the potential impact on building performance, a transient simulation model is developed in Modelica and calibrated by comparison with measurements on a prototype. The effect of the absorbing thermal storage on heat transfers under solar radiation is analyzed in comparison to (i) conditions excluding solar radiation and (ii) an empty tank. An evaluation for four European cities demonstrates that the annual heating demand can be reduced by more than 4.2% and cooling demand by at least 6.6% compared to a façade without thermal storage. The effect is explained not only by the increased thermal mass, but also by the effective modulation of solar gains by the controlled absorbing storage. The dampening of heat flow fluctuations and the control of solar gains is a promising means to reduce the installed power of HVAC (heating/ventilating/air conditioning) installations.

scholarly journals MODELING OF THERMAL MODES OF THE REFLUX CONDENSER OF THE ABSORPTION REFRIGERATION UNIT

2017 ◽  
Vol 3 ◽  
pp. 31-40
Author(s):  
Andrey Kholodkov ◽  
Aleksandr Titlov
Keyword(s):  
Thermal Inertia ◽  
Ammonia Vapor ◽  
Absorption Refrigeration ◽  
Reflux Condenser ◽  
Operating Modes ◽  
Refrigeration Equipment ◽  
Refrigeration Unit ◽  
High Thermal Inertia ◽  
Standard Designs ◽  
Experimental Researches

Currently, developers of modern refrigeration equipment, in accordance with the plans of the UN, are moving to natural refrigerants (hydrocarbons, carbon dioxide and ammonia) that do not have an adverse technological impact on the ecosystem of the planet. In domestic refrigeration technology, one of the options is absorption refrigeration units, the working body of which is an aqueous ammonia mixture with the hydrogen addition. Having a number of unique advantages over compression analogs, absorption systems are characterized by lower energy characteristics. As the analysis shows, the maximum thermodynamic losses in the absorption aggregates are concentrated in the generating unit when the ammonia is evaporated, it is purified from water vapor and transported to the evaporator. In this connection, the mathematical modeling of the thermal regimes of the reflux condenser is performed, which is responsible for purification and transportation of ammonia vapor. Modeling is carried out on standard designs of absorption refrigeration units taking into account reasonable assumptions and results of own experimental researches. A cellular model is used. Stationary operating modes are modeled due to the high thermal inertia of the processes in the reflux condenser. As a result, the perspective of the thermal insulation installation throughout the reflux section is shown, which makes it possible to increase the energy efficiency by 17 ... 22 %

Sign in / Sign up

Export Citation Format

Share Document