scholarly journals Performance Comparison and Evaluation of Two Small Chili Pepper Harvester Prototypes That Attach to Walking Cultivators

2020 ◽  
Vol 10 (7) ◽  
pp. 2570
Author(s):  
Tae-Hyeong Kim ◽  
Dae-Cheol Kim ◽  
Yongjin Cho
Keyword(s):  
Loss Rate ◽  
Field Performance ◽  
Performance Comparison ◽  
Chili Pepper ◽  
Performance Tests ◽  
Harvest Efficiency ◽  
The Difference ◽  
Main Frame

Two prototypes of small chili pepper harvesters that attach to walking cultivators were designed and manufactured before field performance tests were conducted. The two prototypes were designed and manufactured with different main frame materials, forms of divider, picking guides, and helix rotation speeds. The maximum helix speed of the first prototype was 500 rpm, and the helix rotation speeds of the second prototype were a minimum of 510 rpm and a maximum of 730 rpm. Field performance tests were conducted on two species of chili, the AR Legend and the Jeokyoung, to determine which was suitable for mechanization. The Jeokyoung species was found to be most suitable for mechanization as its harvest efficiency was higher and its pepper left on plant rate and ground fall loss rate were lower than AR Legend’s. When the first and second prototypes were compared at helix rotation speeds of 500 to 510 rpm, in the case of the AR Legend, the average harvest efficiency of the second prototype was higher than the first prototype by 2.2%, the average pepper left on plant rate was lower by 2.1%, and the average ground fall loss rate was lower by 3.9%. In the case of the Jeokyoung, the performance of the second prototype was further improved over the first prototype as the average harvest efficiency increased to 5.2%, and the difference in average ground fall loss rate increased to 8.8%.

scholarly journals Variable-Diameter Drum with Concentric Threshing Gap and Performance Comparison Experiment

2020 ◽  
Vol 10 (15) ◽  
pp. 5386
Author(s):  
Yaoming Li ◽  
Zhan Su ◽  
Zhenwei Liang ◽  
Yu Li
Keyword(s):  
Power Consumption ◽  
Loss Rate ◽  
Axial Flow ◽  
Performance Comparison ◽  
Adjustment Method ◽  
Damage Rate ◽  
Variable Diameter ◽  
Combine Harvester ◽  
The Difference ◽  
And Performance

The threshing gap of the thresher device for rice combine harvester has to be adjusted in real time based on different feed rates to ensure the operation efficiency in the harvesting process. However, adjusting the threshing gap by changing the position of concave grid may result in unevenness of threshing gap of the thresher device and further impact on the fluidity of material in the thresher device; in addition, it is also unavailable to adjust the threshing gap by changing the drum diameter when the rice combine harvester is in operation. In view of the above and based on axial flow threshing drum, the design of a variable-diameter threshing drum available for overall and rapid drum diameter adjustment and the research on diameter adjustment device as well as electronic control self-locking device were introduced in this study. Besides, stress analysis was implemented to the diameter adjustment device to ensure the stability of the variable-diameter threshing drum. Field experiment was implemented to identify the difference between the impacts brought to the threshing performance (grain-entrainment loss rate, damage rate, threshing efficiency, and threshing power consumption) by both methods for threshing gap adjustment. The experiment result shows that the drum adjustment method with variable-diameter drum features higher grain-entrainment loss rate, threshing efficiency, and threshing power consumption, yet stable in terms of consumption fluctuation, but a lower damage rate than their counterparts with concave adjustment method.

scholarly journals Tooth loss in complying and non-complying periodontitis patients with different periodontal risk levels during supportive periodontal care

2021 ◽  
Author(s):  
Roberto Farina ◽  
Anna Simonelli ◽  
Andrea Baraldi ◽  
Mattia Pramstraller ◽  
Luigi Minenna ◽  
...  
Keyword(s):  
Active Treatment ◽  
Clinical Relevance ◽  
Tooth Loss ◽  
Loss Rate ◽  
Risk Levels ◽  
Recall Interval ◽  
Level 3 ◽  
The Difference ◽  
Periodontal Risk

Abstract Objectives To evaluate yearly tooth loss rate (TLR) in periodontitis patients with different periodontal risk levels who had complied or not complied with supportive periodontal care (SPC). Materials and methods Data from 168 periodontitis patients enrolled in a SPC program based on a 3-month suggested recall interval for at least 3.5 years were analyzed. For patients with a mean recall interval within 2–4 months (“compliers”) or > 4 months (“non-compliers”) with different PerioRisk levels (Trombelli et al. 2009), TLR (irrespective of the cause for tooth loss) was calculated. TLR values were considered in relation to meaningful TLR benchmarks from the literature for periodontitis patients either under SPC (0.15 teeth/year; positive benchmark) or irregularly complying with SPC (0.36 teeth/year; negative benchmark). Results In both compliers and non-compliers, TLR was significantly below or similar to the positive benchmark in PerioRisk level 3 (0.08 and 0.03 teeth/year, respectively) and PerioRisk level 4 (0.12 and 0.18 teeth/year, respectively). Although marked and clinically relevant in non-compliers, the difference between TLR of compliers (0.32 teeth/year) and non-compliers (0.52 teeth/year) with PerioRisk level 5 and the negative benchmark was not significant. Conclusion A SPC protocol based on a 3- to 6-month recall interval may effectively limit long-term tooth loss in periodontitis patients with PerioRisk levels 3 and 4. A fully complied 3-month SPC protocol seems ineffective when applied to PerioRisk level 5 patients. Clinical relevance PerioRisk seems to represent a valid tool to inform the SPC recall interval as well as the intensity of active treatment prior to SPC enrollment.

Line-of-Sight Wall versus Conventional Noise Wall for Traffic Noise Abatement: Field Performance Comparison

2015 ◽  
Vol 29 (6) ◽  
pp. 04014145
Author(s):  
Shuo Li ◽  
Bowen Guan ◽  
Yingzi (Eliza) Du ◽  
Samy Noureldin
Keyword(s):  
Traffic Noise ◽  
Field Performance ◽  
Performance Comparison ◽  
Line Of Sight ◽  
Noise Abatement

Experiment and Optimization of High-Efficiency Mechanical Separation of Peanut Seedlings and Residual Film Based on Suspension Velocity

2021 ◽  
Vol 64 (4) ◽  
pp. 1381-1389
Author(s):  
Fengwei Gu ◽  
Meng Yang ◽  
Zhichao Hu ◽  
Yanhua Zhang ◽  
Chong Zhang ◽  
...  
Keyword(s):  
Moisture Content ◽  
Rotational Speed ◽  
Loss Rate ◽  
Removal Rate ◽  
Performance Tests ◽  
Test Results ◽  
Material Loss ◽  
Validation Test ◽  
Residual Film ◽  
Forage Utilization

HighlightsAn efficient method for separating peanut seedlings and residual film harvested from film-mulched peanut was proposed, and the mechanism was optimized.The relationships between the suspension velocity and moisture content of different shredded materials were studied.Four-factor, three-level Box-Behnken experiments were carried out and analyzed, and the optimal parameter combination was determined.A validation test was carried out to verify the rationality and accuracy of the optimized regression model.Abstract. To address the problems of lower residual film removal and higher material loss in the forage utilization of peanut seedlings wrapped in residual film, this study explored the relationships between the suspension velocity and moisture content of different shredded materials derived from peanut seedlings and conducted performance tests and parameter optimization for a machine that uses peanut seedlings as forage material. Four-factor, three-level Box-Behnken experiments were designed using the rotational speeds of the shredding shaft, upper fans, and lower fans and the frequency of the vibrating sieve as test factors, and using the residual film removal rate and material loss rate as response values. The test results indicated that the suspension velocity of the shredded materials showed a quadratic relationship with moisture content. The performance tests showed that the significance sequence of the test factors for the residual film removal rate was: rotational speed of the lower fans, rotational speed of the upper fans, rotational speed of the shredding shaft, and frequency of the vibrating sieve. The significance sequence for the material loss rate was: rotational speed of the lower fans, rotational speed of the shredding shaft, frequency of the vibrating sieve, and rotational speed of the upper fans. The parameter optimization and validation test showed that the residual film removal rate was 92.71% and the material loss rate was 8.19% when the rotational speeds of the shredding shaft, upper fans, and lower fans were 1650, 770, and 665 rpm, respectively, and the frequency of the vibrating sieve was 4 Hz. The relative errors between the validation test results and the predicted values from the regression models were less than 3%, which suggests that the regression models are reliable. This study provides a reference for the forage utilization of peanut seedlings harvested from film-mulched peanut and provides a reference for determining the optimal working parameters of forage processing machines. Keywords: Agricultural machinery, Box-Behnken experiment, Optimization, Peanut film-seedling separation, Suspension velocity.

scholarly journals Study of Multimedia Delivery over Software Defined Networks

2016 ◽  
Vol 7 (4) ◽  
pp. 37 ◽  
Author(s):  
Jose Miguel Jimenez ◽  
Oscar Romero ◽  
Albert Rego ◽  
Avinash Dilendra ◽  
Jaime Lloret
Keyword(s):  
Artificial Intelligence ◽  
Personal Computer ◽  
Network Protocols ◽  
Performance Comparison ◽  
Distributed Artificial Intelligence ◽  
Software Defined Networks ◽  
Multimedia Delivery ◽  
Real Network ◽  
Multimedia Streams ◽  
The Difference

Software Defined Networks (SDN) have become a new way to make dynamic topologies. They have great potential in both the creation and development of new network protocols and the inclusion of distributed artificial intelligence in the network. There are few emulators, like Mininet, that allow emulating a SDN in a single personal computer, but there is lack of works showing its performance and how it performs compared with real cases. This paper shows a performance comparison between Mininet and a real network when multimedia streams are being delivered. We are going to compare them in terms of consumed bandwidth (throughput), delay and jitter. Our study shows that there are some important differences when these parameters are compared. We hope that this research will be the basis to show the difference with real deployments when Mininet is used.

An Investigation of the Relationship Between Bench and Field Performance Tests

1987 ◽  
Author(s):  
Frederick L. Bayles ◽  
Michael S. Brenner
Keyword(s):  
Field Performance ◽  
Performance Tests ◽  
The Relationship

Field performance comparison of asphalt crack-filling materials: hot pour versus cold pour

2007 ◽  
Vol 34 (4) ◽  
pp. 505-512 ◽  
Author(s):  
Yetkin Yildirim
Keyword(s):  
Field Performance ◽  
Weather Conditions ◽  
Performance Comparison ◽  
Asphalt Pavements ◽  
Asphalt Emulsion ◽  
Pavement Maintenance ◽  
Filling Materials ◽  
Crack Sealing ◽  
Study Results ◽  
Crack Sealant

One of the most important components of pavement maintenance has been the sealing of cracks. The most commonly used materials for crack sealing are hot-pour sealants, such as hot rubber asphalt. However, this material can be hazardous at high operating temperatures and is more likely to be picked up by vehicle tires if the sealant is not sufficiently adhered to the pavement. Thus, cold-pour sealants have been considered as an alternative for crack sealing purposes. This study aims to compare the performance of hot-pour rubber asphalt crack sealant and cold-pour asphalt emulsion crack sealant in five different Texas districts that experience different weather conditions. The comparison includes seven different crack sealants: three cold pour and four hot pour. Five different roads in five districts were selected for comparison of the sealants. The field study results indicate that hot-pour sealants performed better than cold-pour sealants.Key words: sealants, emulsified crack sealants, crack sealing, asphalt pavements.

scholarly journals Environmental Influence on Stellar Evolution: The Horizontal Branch of NGC 1851

1996 ◽  
Vol 174 ◽  
pp. 357-358
Author(s):  
I. Saviane ◽  
G. Piotto ◽  
M. Capaccioli ◽  
F. Fagotto
Keyword(s):  
Mass Loss ◽  
Loss Rate ◽  
Environmental Influence ◽  
Mass Loss Rate ◽  
Bimodal Distribution ◽  
Age Difference ◽  
Horizontal Branch ◽  
Cluster Area ◽  
The Difference ◽  
Red Clump

The bimodal nature of the horizontal branch (HB) of NGC 1851 is known since Stetson (1981). In order to better understand the properties of its HB, we collected a set of data at the ESO-NTT telescope, which provides a full coverage of the cluster area. Additional archive images from the HST-WFPC camera have been used in order to study the central region. The resulting c-m diagram (CMD) for 20500 stars is presented in Fig. 1 (left). Despite its metallicity ([Fe/H]=−1.3), NGC 1851 presents a well defined blue HB tail, besides the expected red clump. The observed CMD has been compared with the synthetic ones. The bimodal HB can be reproduced assuming that there are two stellar populations in the cluster, with an age difference of ∼ 4 Gyr, hypothesis not supported by other properties of the CMD. On the other side, if we assume that the stars in NGC 1851 are 15 Gyr old (as suggested by the difference between the HB and the TO luminosities), only a bimodal mass loss can reproduce the HB morphology: only stars with higher than standard mass loss rate are able to populate the blue-HB (BHB) tail (Fig. 1,left). There are no observational evidences for a bimodal distribution of other parameters (He, CNO, etc.).

scholarly journals The role of vibrationally excited oxygen and nitrogen in the ionosphere during the undisturbed and geomagnetic storm period of 6-12 April 1990

1998 ◽  
Vol 16 (5) ◽  
pp. 589-601 ◽  
Author(s):  
A. V. Pavlov
Keyword(s):  
Loss Rate ◽  
Boltzmann Distribution ◽  
Rate Coefficients ◽  
Ion Chemistry ◽  
Vibrationally Excited ◽  
Model Calculations ◽  
F Region ◽  
Neutral Temperature ◽  
The Difference ◽  
Excited Nitrogen

Abstract. We present a comparison of the observed behavior of the F-region ionosphere over Millstone Hill during the geomagnetically quiet and storm periods of 6–12 April 1990 with numerical model calculations from the IZMIRAN time-dependent mathematical model of the Earth's ionosphere and plasmasphere. The major enhancement to the IZMIRAN model developed in this study is the use of a new loss rate of O+(4S) ions as a result of new high-temperature flowing afterglow measurements of the rate coefficients K1 and K2 for the reactions of O+(4S) with N2 and O2. The deviations from the Boltzmann distribution for the first five vibrational levels of O2(v) were calculated, and the present study suggests that these deviations are not significant. It was found that the difference between the non-Boltzmann and Boltzmann distribution assumptions of O2(v) and the difference between ion and neutral temperature can lead to an increase of up to about 3 or a decrease of up to about 4 of the calculated NmF2 as a result of a respective increase or a decrease in K2. The IZMIRAN model reproduces major features of the data. We found that the inclusion of vibrationally excited N2(v > 0) and O2(v > 0) in the calculations improves the agreement between the calculated NmF2 and the data on 6, 9, and 10 April. However, both the daytime and nighttime densities are reproduced by the IZMIRAN model without the vibrationally excited nitrogen and oxygen on 8 and 11 April better than the IZMIRAN model with N2(v > 0) and O2(v > 0). This could be due to possible uncertainties in model neutral temperature and densities, EUV fluxes, rate coefficients, and the flow of ionization between the ionosphere and plasmasphere, and possible horizontal divergence of the flux of ionization above the station. Our calculations show that the increase in the O+ + N2 rate factor due to N2(v > 0) produces a 5-36 decrease in the calculated daytime peak density. The increase in the O++ O2 loss rate due to vibrational-ly excited O2 produces 8-46 reductions in NmF2. The effects of vibrationally excited O2 and N2 on Ne and Te are most pronounced during the daytime.Key words. Ion chemistry and composition · Ionosphere – atmosphere interactions · Ionospheric disturbances

Sign in / Sign up

Export Citation Format

Share Document