Experiment and Optimization of High-Efficiency Mechanical Separation of Peanut Seedlings and Residual Film Based on Suspension Velocity

2021 ◽  
Vol 64 (4) ◽  
pp. 1381-1389
Author(s):  
Fengwei Gu ◽  
Meng Yang ◽  
Zhichao Hu ◽  
Yanhua Zhang ◽  
Chong Zhang ◽  
...  
Keyword(s):  
Moisture Content ◽  
Rotational Speed ◽  
Loss Rate ◽  
Removal Rate ◽  
Performance Tests ◽  
Test Results ◽  
Material Loss ◽  
Validation Test ◽  
Residual Film ◽  
Forage Utilization

HighlightsAn efficient method for separating peanut seedlings and residual film harvested from film-mulched peanut was proposed, and the mechanism was optimized.The relationships between the suspension velocity and moisture content of different shredded materials were studied.Four-factor, three-level Box-Behnken experiments were carried out and analyzed, and the optimal parameter combination was determined.A validation test was carried out to verify the rationality and accuracy of the optimized regression model.Abstract. To address the problems of lower residual film removal and higher material loss in the forage utilization of peanut seedlings wrapped in residual film, this study explored the relationships between the suspension velocity and moisture content of different shredded materials derived from peanut seedlings and conducted performance tests and parameter optimization for a machine that uses peanut seedlings as forage material. Four-factor, three-level Box-Behnken experiments were designed using the rotational speeds of the shredding shaft, upper fans, and lower fans and the frequency of the vibrating sieve as test factors, and using the residual film removal rate and material loss rate as response values. The test results indicated that the suspension velocity of the shredded materials showed a quadratic relationship with moisture content. The performance tests showed that the significance sequence of the test factors for the residual film removal rate was: rotational speed of the lower fans, rotational speed of the upper fans, rotational speed of the shredding shaft, and frequency of the vibrating sieve. The significance sequence for the material loss rate was: rotational speed of the lower fans, rotational speed of the shredding shaft, frequency of the vibrating sieve, and rotational speed of the upper fans. The parameter optimization and validation test showed that the residual film removal rate was 92.71% and the material loss rate was 8.19% when the rotational speeds of the shredding shaft, upper fans, and lower fans were 1650, 770, and 665 rpm, respectively, and the frequency of the vibrating sieve was 4 Hz. The relative errors between the validation test results and the predicted values from the regression models were less than 3%, which suggests that the regression models are reliable. This study provides a reference for the forage utilization of peanut seedlings harvested from film-mulched peanut and provides a reference for determining the optimal working parameters of forage processing machines. Keywords: Agricultural machinery, Box-Behnken experiment, Optimization, Peanut film-seedling separation, Suspension velocity.

scholarly journals Modifikasi dan uji performansi mesin perontok lada dengan mekanisme perontok silinder berjaring

2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Leo Dedy Anjiu ◽  
Suhendra Suhendra
Keyword(s):  
Contact Angle ◽  
Rotational Speed ◽  
Agricultural Products ◽  
Performance Tests ◽  
Test Results ◽  
Dependent Variables ◽  
Before And After ◽  
Efficiency Increase ◽  
Independent Variable ◽  
Contact Field

Pepper is one of Indonesia's leading agricultural products. However, post-harvest handling of pepper, such as the threshing process, is still done traditionally. Efforts to overcome these problems done by developing a mechanical threshing process, including by designing and construction a mesh thresher cylinder type of pepper threshing. Test results show, this pepper thresher has a weakness, namely low threshing efficiency so that it needs to developed. Based on these conditions, research is needed that aims to develop, modify and done performance tests on the pepper thresher. The modification was made by making the contact angle between the thresher cylinder and the threshing net is 60o and resulted length of the threshing contact field of about 5.23 cm. The independent variable was the thresher cylinder rotational speed varied into 540, 471, 451 and 352 rpm. The dependent variables were capacity, threshing efficiency and percentage pepper of damage. The results of the analysis showed that the rotational speed of the threshing mechanism had a very significant effect on the capacity, threshing efficiency and the percentage pepper of damage. Increasing the speed of the thresher cylinder can increase the capacity and percentage of damaged pepper, but reduce threshing efficiency. The threshing efficiency increase of the pepper thresher before and after modification was from 35.8% to 95.93% on the approaching treatment.

Medium Density Particleboard with Addition of Impregnated Paper

2014 ◽  
Vol 1025-1026 ◽  
pp. 543-546
Author(s):  
Juliana Cortez Barbosa ◽  
Anderson Luiz da Silva Michelon ◽  
Elen Aparecida Martines Morales ◽  
Cristiane Inácio de Campos ◽  
André Luis Christoforo ◽  
...  
Keyword(s):  
Moisture Content ◽  
Modulus Of Elasticity ◽  
Mechanical Tests ◽  
Modulus Of Rupture ◽  
Medium Density ◽  
Test Results ◽  
Thickness Swelling ◽  
Adhesion Test ◽  
Layer Medium ◽  
Determine Moisture Content

The aim of this research was to produce three-layer Medium Density Particleboard (MDP), with the addition of impregnated paper, in the inner layer, in proportions of 1; 5 and 20%. In this study, MDP was composed with particles of small size in outer layers, and larger particles in internal layer. After panel manufacturing, physical and mechanical tests based on Brazilian Code ABNT NBR 14.810 were carried out to determine moisture content; density; thickness swelling; water absorption; modulus of rupture (MOR) and modulus of elasticity (MOE) in static bending and internal adhesion. Test results were compared to commercial panels, produced with 100% Eucalyptus, considering the requirements specified by Brazilian Code. Properties presented values close to normative specifications, indicating positively the possibility of production of MDP using addition of waste paper impregnated.

Trowelable Rubber Rocket Insulation for Use at 2800°C

1984 ◽  
Vol 57 (4) ◽  
pp. 843-854 ◽  
Author(s):  
J. G. Sommer
Keyword(s):  
Room Temperature ◽  
Loss Rate ◽  
Service Temperature ◽  
Material Loss ◽  
Blowing Agent ◽  
Unusual Combination ◽  
Novel Approaches ◽  
Glass Microballoons ◽  
Burning Propellant ◽  
Intense Heat

Abstract Ablative, trowelable rocket insulation was prepared; it crosslinks at room temperature and self-bonds to prevulcanized NBR insulation. The material loss rate (MLR) of this insulation is low when it is tested by an oxyacetylene torch at temperatures of about 2800°C. Boric acid in the insulation causes an effective char to form at service temperature. This char slows the loss rate of nondegraded insulation beneath it. Density of this nondegraded insulation is 1.3 g/cm3. Density is reduced sharply to 0.8 g/cm3 by incorporating glass microballoons. They cause only a slight increase in MLR of the insulation at service temperatures. MLR can be significantly reduced by incorporating a blowing agent which decomposes only after the insulation is exposed to service temperature. Hence, an unusual combination of requirements is met by several novel approaches. This insulation has protected rockets as large as 6.6 meters in diameter from the intense heat of burning propellant in service.

Study on Improving Biodegradability of Straw Pulp Papermaking Wastewater by Coagu-Flocculation and Nuclear-Flocculation

2014 ◽  
Vol 926-930 ◽  
pp. 4361-4364
Author(s):  
Xiao Qiao Song
Keyword(s):  
Molecular Weight ◽  
Organic Pollutants ◽  
Aromatic Hydrocarbons ◽  
Removal Rate ◽  
Activated Sludge Process ◽  
Test Results ◽  
Combination Process ◽  
Coagulation And Flocculation ◽  
Flocculation Process ◽  
Papermaking Wastewater

When straw pulp papermaking wastewater was treated by the process of coagu-flocculation and nuclear-flocculation, there were still high CODCr. UV254 can reflect organic pollutants and organic pollutants of unsaturated aromatic ring, carbon-carbon double bond. With the decrease of molecular weight of organic pollutants, absorption of ultraviolet light will decrease. Indirectly, it reflectd that the combination process had a good removal effect on high molecular aromatic hydrocarbons difficult to be biodegraded. Meanwhile it can improve the the biodegradability. It used the activated sludge process as subsequent process of coagulation and-flocculation process. The test results showed that the removal rate of CODCr was 24.1%, CODCr was the 88.1mg/L. It reached effluent standard.

scholarly journals PEMANFAATAN KITOSAN DARI CANGKANG RAJUNGAN (Portonus sanginolentus L.) SEBAGAI PENGAWET IKAN KEMBUNG (Rastrelliger sp) DAN IKAN LELE (Clarias Batrachus)

2015 ◽  
Vol 3 (4) ◽  
pp. 18-24
Author(s):  
Rika Silvia ◽  
Sari Wahyu Waryani ◽  
Farida Hanum
Keyword(s):  
Acetic Acid ◽  
Moisture Content ◽  
Shelf Life ◽  
Microbial Activity ◽  
Storage Time ◽  
Chitosan Solution ◽  
Ash Content ◽  
Clarias Batrachus ◽  
Test Results ◽  
Chitin And Chitosan

The use of appropriate anti-microbial compounds can extend the shelf life of a product as well as ensure the safety of the product. That requires a material that is naturally anti-microbial so as not harmful to health. The use of chitosan to inhibit microbial activity on mackerel (Rastrelliger sp) and catfish (Clarias batrachus) to test it's effectiveness. In this research chitosan that used as an anti-microbial extracted from the shells of crabs (Portunus sanginolentus L.). Chitin and chitosan that were successfully extracted were characterized it's results includes moisture content testing, ash content, and degrees of deacetylation. Characterized chitosan, were used as an anti-microbial mackerel (Rastrelliger sp) and catfish (Clarias batrachus). Chitosan was dissolved in 1% acetic acid with varying concentrations of chitosan as 1%, 1.5%, 2%, and 2.5%. The storage time of fish: 0 hours, 10 hours, 15 hours, 20 hours, and 25 hours. The results of research chitosan form as granules / powder, 5% moisture content, ash content  2% and the degree of deacetylation which amounted to 61,08%. Chitosan solution test results on fish showed that fish preservation by soaking with chitosan addition of 1.5% was the best variable and could extend the shelf life of fish  more than 5 hours while fish preservation by spraying gave the best variable with addition of chitosan 2.5% and could extend the shelf life of fish less than 5 hours.

scholarly journals Exhaust emission from a vehicle engine operating in dynamic states and conditions corresponding to real driving

2019 ◽  
Vol 178 (3) ◽  
pp. 99-105
Author(s):  
Monika ANDRYCH-ZALEWSKA ◽  
Zdzisław CHŁOPEK ◽  
Jerzy MERKISZ ◽  
Jacek PIELECHA
Keyword(s):  
Rotational Speed ◽  
Time Derivative ◽  
Exhaust Emission ◽  
Test Results ◽  
Engine Operation ◽  
Vehicle Engine ◽  
University Of Technology ◽  
The Time Domain ◽  
Speed Characteristic ◽  
Dynamic States

The article presents the exhaust emission results from a diesel engine in dynamic states of engine operation in the driving tests: NEDC (New European Driving Cycle) and Malta test, developed at the Poznan University of Technology. The NEDC and Malta tests were carried out as simulations on the engine test bench mimicking the driving tests conditions. The test results of the emission of carbon monoxide, hydrocarbons and nitrogen oxides obtained in each of the tests were presented. The dynamic states have been classified de-pending on the time derivative value of the torque and engine rotational speed. Both the positive and negative as well as zero time deriv-ative values of torque and rotational speed were considered. Therefore, overall six types of dynamic states were analyzed. A high sensi-tivity of exhaust emission to various types of dynamic states was found. The exhaust emission sensitivity to dynamic states in the Malta test was found to be higher than for the NEDC test, although these tests have similar properties (average rotational speed and average torque). This is due to the fact that the NEDC test is created on the basis of the similarity of zero-dimensional characteristics of the cars speed characteristic, whereas the Malta test was designed in accordance with the principle of faithful representation in the time domain of the NEDC speed curve.

scholarly journals Performance Variance  Evaluation on  Mozilla Firefox

2021 ◽  
Author(s):  
◽  
Jan Larres
Keyword(s):  
Statistical Technique ◽  
External Factors ◽  
Software Performance ◽  
Performance Tests ◽  
Test Results ◽  
Actual Performance ◽  
Reliable Detection ◽  
Mozilla Firefox ◽  
The One ◽  
Test Result

<p>In order to evaluate software performance and find regressions, many developers use automated performance tests. However, the test results often contain a certain amount of noise that is not caused by actual performance changes in the programs. They are instead caused by external factors like operating system decisions or unexpected non-determinisms inside the programs. This makes interpreting the test results hard since results that differ from previous results cannot easily be attributed to either genuine changes or noise. In this thesis we use Mozilla Firefox as an example to try to find the causes for this performance variance, develop ways to reduce the noise and present a statistical technique that makes identifying genuine performance changes more reliable. Our results show that a significant amount of noise is caused by memory randomization and other external factors, that there is variance in Firefox internals that does not seem to be correlated with test result variance, and that our suggested statistical forecasting technique can give more reliable detection of genuine performance changes than the one currently in use by Mozilla.</p>

scholarly journals Comparative analysis of view technologies for the Spring application

2020 ◽  
Vol 14 ◽  
pp. 78-81
Author(s):  
Vadym Borys ◽  
Roman Slezenko ◽  
Beata Pańczyk
Keyword(s):  
Comparative Analysis ◽  
User Interface ◽  
Memory Performance ◽  
Performance Tests ◽  
Test Results ◽  
Rest Api

The goal of the article is to choose the most efficient user interface creation tools possible for Spring. The study compares 4 selected view technologies: JSP,  Thymeleaf, Wicket and Angular. Time and memory performance tests were carried out using Rest API in Spring. Test results allowed to identify the best solutions.

scholarly journals KOMPOSISI KIMIA, SENYAWA BIOAKTIF DAN ANKGA LEMPENG TOTAL PADA RUMPUT LAUT Gracillaria edulis

2017 ◽  
Vol 5 (3) ◽  
pp. 90
Author(s):  
Susanti Musa ◽  
Grace Sanger ◽  
Henny Adeleida Dien
Keyword(s):  
Moisture Content ◽  
Proximate Composition ◽  
Bioactive Compound ◽  
Bacterial Count ◽  
Ash Content ◽  
Plate Count ◽  
Test Results ◽  
Gracilaria Edulis ◽  
Average Value ◽  
Total Plate Count

This study was conducted to determine the proximate composition, bioactive compound and total plate count (TPC) in Gracilaria edulis seaweed. This research used descriptive explorative method. The results showed the average value of moisture content (77.7%); protein content (39.4%); fat content (8.1%); carbohydrates by difference (71.7%); ash content (20.7%) and very low bacterial count. Phytochemical test results show this seaweed contains alkaloids, saponins, flavonoids, and triterpenoids compounds. Penelitian ini dilakukan untuk mengetahui komposisi proksimat, senyawa bioaktif dan angka lempeng total (ALT) pada rumput laut Gracilaria edulis. Penelitian ini menggunakan metode penelitian deskriptif eksploratif. Hasil penelitian menunjukkan nilai rata-rata kadar air (77,7%); protein (39,4%); kadar lemak (8,1%); karbohidrat (71,7%); kadar abu (20,7%) dan jumlah bakteri yang sangat rendah. Hasil uji fitokimia menunjukkan rumput laut ini mengandung  senyawa alkaloid, saponin, flavonoid, dan triterpenoid.

scholarly journals Investigation of Avalanche Time and Carr’s Index of Poultry Litter Powder as Flowability Indices

2012 ◽  
Vol 45 (4) ◽  
pp. 15-27 ◽  
Author(s):  
I. Valaei ◽  
S.R. Hassan-Beygi ◽  
M.H. Kianmehr ◽  
J. Massah
Keyword(s):  
Particle Size ◽  
Moisture Content ◽  
Rotational Speed ◽  
Flow Behavior ◽  
Poultry Litter ◽  
Primary Source ◽  
Critical Factor ◽  
Bulk Solid ◽  
Tap Density ◽  
Powder Avalanche

Abstract The world’s dependence on chemical fertilizer as the primary source for enriching agricultural fields is continually increasing that cause nature pollution. This has led researchers to aggressively investigate renewable fertilizer resources, biomass, to produce organic crops and reduced wastage. Poultry litter is a bulk solid and biomass feed stocks. Flow behavior of bulk solid is a critical factor in designing and developing suitable equipments (e.g. pelletizing machine). The bulk density, tap density, Carr’s index and powder avalanche time technique were applied to evaluate the flow properties of poultry litter. The experiments were carried out at moisture content (10, 20 and 30% w.b.), particle size (0.3, 0.6 and 1.18 mm) for the bulk and tap densities as well as Carr’s index. In addition to the moisture content (10, 20 and 30 %w.b.) and particle size (0.3, 0.6 and 1.18 mm) the rotational speed of drum (0.5, 1 and1.5 rpm) were also investigated for the avalanche time. The results showed that with increasing moisture content Carr’s index increased significantly (P<0.01) in the ranges of 16.2% to 18.5% and with increasing particle size the Carr’s index decreased from 20.35% to 14.78%. The litter powder avalanche time (AT) increased significantly (P<0.01) with increasing moisture content and decreasing rotational speed and particle size. The bulk and tap densities of the litter powder was decreased with increasing moisture content and increasing the particle size. The bulk and tap densities of the driest and finest poultry litter sample were higher than other ones.

Sign in / Sign up

Export Citation Format

Share Document