scholarly journals Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution

2020 ◽  
Vol 10 (18) ◽  
pp. 6384
Author(s):  
Jesús M. Barraza-Contreras ◽  
Manuel R. Piña-Monarrez ◽  
Alejandro Molina
Keyword(s):  
Fatigue Life ◽  
Weibull Distribution ◽  
Life Prediction ◽  
Equivalent Stress ◽  
Element Analysis ◽  
Failure Times ◽  
Failure Theory ◽  
Mechanical Element ◽  
Failure Theories ◽  
Cycles To Failure

Applying Goodman, Gerber, Soderberg and Elliptical failure theories does not make it possible to determine the span of failure times (cycles to failure-Ni) of a mechanical element, and so in this paper a fatigue-life/Weibull method to predict the span of the Ni values is formulated. The input’s method are: (1) the equivalent stress (σeq) value given by the used failure theory; (2) the expected Neq value determined by the Basquin equation; and (3) the Weibull shape β and scale η parameters that are fitted directly from the applied principal stress σ1 and σ2 values. The efficiency of the proposed method is based on the following facts: (1) the β and η parameters completely reproduce the applied σ1 and σ2 values. (2) The method allows us to determine the reliability index R(t), that corresponds to any applied σ1i value or observed Ni value. (3) The method can be applied to any mechanical element’s analysis where the corresponding σ1 and σ2, σeq and Neq values are known. In the performed application, the σ1 and σ2 values were determined by finite element analysis (FEA) and from the static stress analysis. Results of both approaches are compared. The steps to determine the expected Ni values by using the Weibull distribution are given.

A New Energy-Based Multiaxial Fatigue Life Prediction Procedure

2008 ◽  
Author(s):  
Wasim Tarar ◽  
Onome Scott-Emuakpor ◽  
M.-H. Herman Shen ◽  
Tommy George ◽  
Charles Cross
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Life Prediction ◽  
Equivalent Stress ◽  
Multiaxial Fatigue ◽  
Constitutive Law ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Number Of Cycles ◽  
Cycles To Failure

An energy-based fatigue life prediction framework was previously developed by the authors for prediction of axial and bending fatigue life at various stress ratios. The framework for the prediction of fatigue life via energy analysis was based on a new constitutive law, which states the following: the amount of energy required to fracture a material is constant. In this study, energy expressions that construct the constitutive law are equated in the form of total strain energy and the distortion energy dissipated in a fatigue cycle. The resulting equation is further evaluated to acquire the equivalent stress per cycle using energy based methodologies. The equivalent stress expressions are developed both for biaxial and multiaxial fatigue loads and are used to predict the number of cycles to failure based on previously developed prediction criterion. The equivalent stress expressions developed in this study are further used in a new finite element procedure to predict the fatigue life for two and three dimensional structures. The final output of this finite element analysis is in the form of number of cycles to failure for each element on a scale in ascending or descending order. Therefore, the new finite element framework can provide the number of cycles to failure at each location in gas turbine engine structural components. In order to obtain experimental data for comparison, an Al6061-T6 plate is tested using a previously developed vibration based testing framework. The finite element analysis is performed for Al6061-T6 aluminum and the results are compared with experimental results.

scholarly journals Research on the Fatigue Life Prediction Method of Thrust Rod

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Guoyu Feng ◽  
Wenku Shi ◽  
Henghai Zhang ◽  
Qinghua Zu ◽  
Teng Teng ◽  
...  
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Fatigue Damage ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Equivalent Stress ◽  
Prediction Method ◽  
Fatigue Life Prediction ◽  
Model Parameters ◽  
Element Analysis

Purpose of this paper is to investigate the fatigue life prediction method of the thrust rod based on the continuum damage mechanics. The equivalent stress used as damage parameters established rubber fatigue life prediction model. Through the finite element simulation and material test, the model parameters and the fatigue damage dangerous positions were obtained. By equivalent stress life model, uniaxial fatigue life of the V-type thrust rod is analyzed to predict the ratio of life and the life of the test was 1.73, within an acceptable range, and the fatigue damage occurring position and finite element analysis are basically the same. Fatigue life analysis shows that the method is of correct, theoretical, and practical value.

A Study on Fatigue Life Evaluation of Pressure Vessel Made of ASME SA240-316L Material Using Numerical Analysis

2019 ◽  
Vol 893 ◽  
pp. 1-5 ◽  
Author(s):  
Eui Soo Kim
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Pressure Vessel ◽  
Life Prediction ◽  
Pressure Vessels ◽  
Physical Damage ◽  
Element Analysis ◽  
Internal Damage ◽  
Life Evaluation ◽  
Fatigue Life Evaluation

Pressure vessels are subjected to repeated loads during use and charging, which can causefine physical damage even in the elastic region. If the load is repeated under stress conditions belowthe yield strength, internal damage accumulates. Fatigue life evaluation of the structure of thepressure vessel using finite element analysis (FEA) is used to evaluate the life cycle of the structuraldesign based on finite element method (FEM) technology. This technique is more advanced thanfatigue life prediction that uses relational equations. This study describes fatigue analysis to predictthe fatigue life of a pressure vessel using stress data obtained from FEA. The life prediction results areuseful for improving the component design at a very early development stage. The fatigue life of thepressure vessel is calculated for each node on the model, and cumulative damage theory is used tocalculate the fatigue life. Then, the fatigue life is calculated from this information using the FEanalysis software ADINA and the fatigue life calculation program WINLIFE.

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

Development of a High Cycle Fatigue Life Prediction Model for Thin Film Silicon Structures

2018 ◽  
Vol 140 (3) ◽  
Author(s):  
Chia-Cheng Chang ◽  
Sheng-Da Lin ◽  
Kuo-Ning Chiang
Keyword(s):  
Thin Film ◽  
Fatigue Life ◽  
Life Prediction ◽  
Microelectromechanical Systems ◽  
Fatigue Testing ◽  
Mesh Size ◽  
Prediction Equation ◽  
Frequency Effect ◽  
Element Analysis ◽  
Solution Type

The fatigue characteristics of microelectromechanical systems (MEMS) material, such as silicon or polysilicon, have become very important. Many studies have focused on this topic, but none have defined a good methodology for extracting the applied stress and predicting fatigue life accurately. In this study, a methodology was developed for the life prediction of a polysilicon microstructure under bending tests. Based on the fatigue experiments conducted by Hocheng et al. (2008, “Various Fatigue Testing of Polycrystalline Silicon Microcantilever Beam in Bending,” Jpn. J. Appl. Phys., 47, pp. 5256–5261) and (Hung and Hocheng, 2012, “Frequency Effects and Life Prediction of Polysilicon Microcantilever Beams in Bending Fatigue,” J. Micro/Nanolithogr., MEMS MOEMS, 11, p. 021206), cantilever beams with different dimensions were remodeled with mesh control technology using finite element analysis (FEA) software to extract the stress magnitude. The mesh size, anchor boundary, loading boundary, critical stress definition, and solution type were well modified to obtain more correct stress values. Based on the new stress data extracted from the modified models, the optimized stress-number of life curve (S–N curve) was obtained, and the new life-prediction equation was found to be referable for polysilicon thin film life prediction under bending loads. After comparing the literature and confirming the new models, the frequency effect was observed only for the force control type and not for the displacement control type.

scholarly journals Fatigue Life Prediction of Austenitic Type 316L Stainless Steel Using ABAQUS

2014 ◽  
Vol 911 ◽  
pp. 459-462
Author(s):  
Khairul Azhar Mohammad ◽  
Mohd Sapuan Salit ◽  
Edi Syams Zainudin ◽  
Nur Ismarubie Zahari ◽  
Ali Aidy
Keyword(s):  
Stainless Steel ◽  
Fatigue Life ◽  
Fatigue Limit ◽  
Life Prediction ◽  
316L Stainless Steel ◽  
Fatigue Life Prediction ◽  
Experimental Comparison ◽  
Element Analysis ◽  
Type 316L ◽  
Type 316L Stainless Steel

This work has carried out on Type 316L stainless steel of hollow bar specimen. The aim of this work is to determine the fatigue life prediction using Finite Element Analysis (FEA). The simulation performed by applied the different stress level to predict the stress of operation to measured life at the measured of operation stress. The simulation emphasis is focused upon the importance of characterize the fatigue limit with compared to data experimental. Comparison of fatigue limit between both simulation and experiment is 150 MPa and 161 MPa, respectively which will provide good agreement in terms of accuracy prediction even various aspects should be taken into account in simulation.

Life Assessment of Turbine Components Through Experimental and Numerical Investigations

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Dianyin Hu ◽  
Rongqiao Wang ◽  
Guicang Hou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Life Prediction ◽  
Life Assessment ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Creep Fatigue ◽  
Turbine Component ◽  
Good Agreement

A new lifetime criterion for withdrawal of turbine components from service is developed in this paper based on finite element (FE) analysis and experimental results. Finite element analysis is used to determine stresses in the turbine component during the imposed cyclic loads and analytically predict a fatigue life. Based on the finite element analysis, the critical section is then subjected to a creep-fatigue test, using three groups of full scale turbine components, attached to an actual turbine disc conducted at 750 °C. The experimental data and life prediction results were in good agreement. The creep-fatigue life of this type of turbine component at a 99.87% survival rate is 30 h.

Fatigue Life Prediction of Heat-Aging Vulcanized Natural Rubber

2006 ◽  
Vol 321-323 ◽  
pp. 518-521 ◽  
Author(s):  
Chang Su Woo ◽  
Wan Doo Kim
Keyword(s):  
Fatigue Life ◽  
Natural Rubber ◽  
Life Prediction ◽  
Prediction Equation ◽  
Damage Parameter ◽  
Fatigue Life Prediction ◽  
Aging Effects ◽  
Element Analysis ◽  
Fatigue Damage Parameter ◽  
Lagrange Strain

Heat-aging effects on the material properties and fatigue life prediction of natural rubber were experimentally investigated. The rubber specimens were heat-aged in an oven at the temperature ranging from 50oC to 100oC for a period ranging from 1 day to 90days. Fatigue life prediction methodology of vulcanized natural rubber was proposed by incorporating the finite element analysis and fatigue damage parameter determined from fatigue test. Fatigue life prediction equation effectively represented by a single function using the Green-Lagrange strain. Predicted lives are in a good agreement with the experimental lives within a factor of two

Sign in / Sign up

Export Citation Format

Share Document